Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.0 LAdmitted-Fee/PreQual/Technical/Finance KOLTHUMTHODI H PARAKKAL HOUSE KEEZHUPARAMBA AREEKODE | L1 | Admitted-Fee/PreQual/Technical/Finance | |
| 2 | L2₹6.3 L+₹28,044.87 (4.64%)Admitted-Fee/PreQual/Technical/Finance | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | SHAMEEM YAKKIPARAMBAN KOLOTHUMTHODI L1 | NISAR K L2 |
|---|---|---|---|---|---|
| 1.00Cost of Materials including Labour Charge | |||||
| 1.00 | OD164314/2025-2026:Complete dismantling of the existing blower unit, including removal of its foundation, cutting interconnection pipes and valves without damaging the remaining piping, lifting and transporting the unit to a safe location, and careful dismantling of panels, wiring, and electrical connections. | 1 | no | 26,481.82 ₹26,481.82 Lowest | 27,710.73 ₹27,710.73 |
| 1.00 | OD175639/2025-2026:Supply of twin-lobe air compressor having a capacity of 720 m³/hr and a maximum pressure of 0.35 kg/cm², operating at 1320 rpm, complete with suction filter, suction silencer, discharge silencer, pressure gauge, safety valves, V-belts, belt guard, drive and driven pulleys, anti-vibration pads, and coupled with a 20 HP, 3-phase, 4-pole, foot-mounted induction motor. | 1 | no | 3,28,834.92 ₹3,28,834.92 Lowest | 3,44,094.78 ₹3,44,094.78 |
| 1.00 | OD188041/2025-2026:Transportation charges for the complete blower/compressor unit from the factory outlet to the WTP. | 1 | no | 64,665.05 ₹64,665.05 Lowest | 67,665.89 ₹67,665.89 |
| 1.00 | OD175701/2025-2026:Charges for the installation and commissioning of the complete blower/compressor unit along with the motor. | 1 | no | 51,430.91 ₹51,430.91 Lowest | 53,817.61 ₹53,817.61 |
| 1.00 | OD151945/2025-2026:Supply and fixing compressor panel board with fully automatic star delta starter, indication lamp, VAF meter, capacitor, CT coil, MCB and controll wire and wiring etc | 1 | no | 85,722 ₹85,722 Lowest | 89,700 ₹89,700 |
| 1.01 | OD151953/2025-2026:Supply and laying power cable of 4x6Sqmm Copper wire in a reccessed conduit by clamping | 12 | no | 758.31 ₹9,099.72 Lowest | 793.5 ₹9,522 |
| 1.01 | 100.37.7.1:In situ fabrication of M.S. pipes of size 200mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete. | 2 | metre | 6,926.93 ₹13,853.86 Lowest | 7,248.38 ₹14,496.76 |
| 1.01 | 100.37.7.2:Fabricating M.S. flanges of diameter 200mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates. | 2 | no | 2,311.55 ₹4,623.1 Lowest | 2,418.82 ₹4,837.64 |
| 1.01 | 100.37.7.3:Cutting 200mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. | 5 | no | 229.87 ₹1,149.35 Lowest | 240.53 ₹1,202.65 |
Tender Value
₹5.5 L
EMD Value
₹13,747
Closing Date
10 Sept 2026, 1:00 pmClosed
Assistant Executive Engineer.
KWA,PH Sub division, Manjeri.
State Plan-2025-26-UWSS to Anakkayam-Supply, erection and commissioning of suitable air blower/compressor at existing 8.5 MLD WTP and related works-General Electrical Work
2026_KWA_867336_1
AEE/MJI/05/2026-27
Open Tender
Civil Works - Water Works
Item Rate
90 days
Anakkayam WTP
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,215
₹13,747
22 Sept 2026
2 Sept 2026
11 Sept 2026
2 Sept 2026
10 Sept 2026
3 Sept 2026
3 Sept 2026 - 7 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Cost of Materials including Labour Charge | |||||
| 1.001 | OD164314/2025-2026:Complete dismantling of the existing blower unit, including removal of its foundation, cutting interconnection pipes and valves without damaging the remaining piping, lifting and transporting the unit to a safe location, and careful dismantling of panels, wiring, and electrical connections. | - | no | - | - |
| 1.002 | OD175639/2025-2026:Supply of twin-lobe air compressor having a capacity of 720 m³/hr and a maximum pressure of 0.35 kg/cm², operating at 1320 rpm, complete with suction filter, suction silencer, discharge silencer, pressure gauge, safety valves, V-belts, belt guard, drive and driven pulleys, anti-vibration pads, and coupled with a 20 HP, 3-phase, 4-pole, foot-mounted induction motor. | - | no | - | - |
| 1.003 | OD188041/2025-2026:Transportation charges for the complete blower/compressor unit from the factory outlet to the WTP. | - | no | - | - |
| 1.004 | OD175701/2025-2026:Charges for the installation and commissioning of the complete blower/compressor unit along with the motor. | - | no | - | - |
| 1.005 | OD151945/2025-2026:Supply and fixing compressor panel board with fully automatic star delta starter, indication lamp, VAF meter, capacitor, CT coil, MCB and controll wire and wiring etc | - | no | - | - |
| 1.006 | OD151953/2025-2026:Supply and laying power cable of 4x6Sqmm Copper wire in a reccessed conduit by clamping | - | no | - | - |
| 1.007 | 100.37.7.1:In situ fabrication of M.S. pipes of size 200mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete. | - | metre | - | - |
| 1.008 | 100.37.7.2:Fabricating M.S. flanges of diameter 200mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates. | - | no | - | - |
| 1.009 | 100.37.7.3:Cutting 200mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. | - | no | - | - |
stage.html
html • 0.02 MB
finance_1468648.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
KWAGeneralConditionsforeTenderingV5.pdf
PDF • 0.69 MB
Tendernotice_1.pdf
PDF • 0.05 MB
biddms.pdf
Tender Documents • 1.64 MB
BOQ_1468648.xls
BOQ • 0.31 MB
Additionaldocuments.pdf
Additional Documents • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .