REPAIR TO SEWAGE LINES, MANHOLE LINES, MANHOLE COVERS, DESLUDGING OF SEPTIC TANKS AND SOAKAGE WELLS IN TECH AREA AT AF STN PHALODI.

Amount

M&L for cleaning and desilting of sewage lines of pipe 100mm dia of any shape upto any depth by pumping out /removing liquid waste/sewage, plugging the end pipes or diverting the flow into drains if necessary, removing silt, sludge glass/PVC bottle and any type of garbage etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpoline to out side of defence land and it should be disposed off at such place which is not detrimental to public health all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed. Note :- (i) Contractor shall be provided all tools and plants including bamboos, iron rod, bucket, rope etc for the operators. (ii) Contractor shall be provide 03 Nos safaiwalas every month and has to get it done sewage complaint which is received day to day by sub division. (iii) Any complaint which is not completed within two days from the date of issue of complaint, compensation will be charged @ Rs 200/- per day in addition to above every additional day delayed will be charged @ Rs. 50/- per day. (iv) All above provisions included in quoted rate.

All as per item No 01 here-in-before but sewage lines of pipe 150mm dia complete all as specified and directed.

M&L for cleaning and desilting of manholes depth not exceeding 1.50 meter by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell and including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpolineto to out side of defence land and it should be disposed off at such place which is not detrimental to public health all as per existing rules and regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified and directed.

M&L for cleaning and desilting of manholes depth exceeding 1.50 meter but not exceeding 3.00 meter by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpolineto to out side of defence land and it should be disposed off at such place which is not detrimental to public health all as per existing rules and regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified and directed.

M&L for cleaning the chocked/blocked in AC/CI/PVC soil waste pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints upto ground/stilt plus four floors complete all as specified and directed.

M&L for Cleaning of septic tank/soakage well of any size & capacity by removing solid or semi solid sludge by mechanically or manually including removal of sludge in covered vehicle to a distance exc 500m but n.exc2000m & buried in excavated pit of adequate size including excavation and covering with earth as directed by Engineer-in-charge(measurement will be taken only after de-watering of tanks)

Dewatering of septic tank/soakage well /manholesof any size, depth and capacity by manually or mechanically & removing water into nearby drain complete all as specified & directed.

Demolition and breaking up drain pipes of 100mm bore (Salt glazed stoneware, AC or Reinforced concrete) set in cement mortar all as specified and directed.

Demolition and breaking up drain pipes of bore 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specified and directed

Demolition and breaking up drain pipes of bore 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specified and directed

Excavating in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting ou in hard/dense soil all as specified and directed

Excavating in trenches, n. exc 1.50m wide and exc 1.50m but n.exc 3.00m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and and getting outin hard/dense soil all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm hard / dense soil all as directed

Removing excavated soil material n exc. 50m and depositing where directed at a level n exc. 1.50m above the starting point complete all as specified and directed.

M&L for 100 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in CM (1:1) with spun yarn & tested complete all as specified & directed.

M&L for 150 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in CM (1:1) with spun yarn & tested complete all as specified & directed.

M&L for 200 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in CM (1:1) with spun yarn & tested complete all as specified & directed.

M&L for Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 100mm bore pipe complete all as specified and directed.

M&L for Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed.

M&L for Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore pipe complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (100 mm) bore complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (150 mm) bore complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (200 mm) bore complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thick (below or above ground level) of any description not other specifically provided for etc and removal of rocks/debris to a distance not exc 50 mts and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

Demolation of Precast concrete articles /Precast concrete block masonry built in cement mortar all as directed

M&L Pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate ) block masonry with solid blocks, exc. 10 cm in width and setting in Cement mortar 1:6 , complete all as specified and directed.

M&L for Cement concrete 100 mm thick Type D2 (1:4:8) using 40 mm graded aggregate and finishing the concrete surface even and fair without using extra cement complete all as specified.

M&L for Cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth ditto as in item No 29 above.

M&L for Precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description and of any thickness on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:3 with integral water proofing compound @ 3% of cement finished even and smooth without using extra cement complete all as specified and directed.

Supplying only integral water proofing compound

M&L for Running welding thickness of metal to be welded exc 6mm but n exc 9mm complete all as specified and directed.

M&L for Running welding thickness of metal to be welded not exc 6mm complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

M&L for Preparation of steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of interlocking tiles of any description, any thickness all as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade,with grey cement and no pigment over 25mm to 30mm sand thickness all as directed

ditto as above Item No-42 but except tiles

M&L for Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in with plain or interlocking joints (as directed), coping Kerb in edging making good to disturbed surface of ground complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided and removal of debris to a distance not exc 100m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified. (reinforcement cut as required to facilitate demolition)

M&L for Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for TMT bars 6 to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

Use & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps out of 50x5 mm flat iron in the interval of 1.50m and 16mm dia round iron stays, including bolts and nuts and securing ends of stays complete all as specified and directed including taking down old pipe.

S&F 100 mm dia CI branch piece double, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed including taking down old one.

S&F 100 mm bore CI bends (any radius) diminishing pieces or tapers complete all as specified and directed including taking down old one.

M&L preparation of new steel surfaces of eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F in repairs 200mm bore PVC (SWR) pipes single socketed in any length with solvent joints fixed to walls with and including MS stack clamps out of 50x5 mm flat iron in the interval of 1.50m and 16mm dia round iron stays, including bolts and nuts and securing ends of stays, finishing the mouth of pipe leakproof with CM 1:2 complete all as specified and directed including taking down old pipe.

S&F in repairs 110 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall with and including MS stack clamps out of 50x5 mm flat iron in the interval of 1.50m and 16mm dia round iron stays, including bolts and nuts and securing ends of stays, finishing the mouth of pipe leakproof with CM 1:2complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius of 110 mm dia with access door complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

M&L for preparation of new plastered surfaces of manholes, applying of three coats of white wash complete all as specified and directed.

Note for all items :- (i) Contractor shall provide minimun 2 No,s safaiwala daily for getting complain be done, received from user. Safaiwala shall report to the office of Engineer-in-Charge for attandance for which a register will maintanded and payment should included against items mantioned above if found absent recovery @ Rs. 300/- per safaiwala per day shall be recovered from RAR/ Final bill. (ii) Contractor shall deposit the material brought at site after approval with Engineer-in-Charge before incorporating in the unit for verification of quantity and quality of material.

M/S SOLANKI GENERAL SUPPLIERS