Repair and renovation works of Officers residential flats of the SIDBI at Ludhiana

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be

specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in

12 11.37 colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Sqm 150.00 1096.55 1,64,482.50

Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the

joints with white cement and matching pigment etc.,., complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622

(thickness to be specified by the manufacturer ) of approved make in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of

steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and

jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with

pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

14 11.41A cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting

the joints with white cement and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips

of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

14.1 11.41A.1 Double charge vitrified tile polished finish of size

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even

22.1 13.60.1 Two or more coats on new work. Sqm 10000.00 137.85 1378500

Polishing in high gloss/matt finish melamine clear polish on wood work in required

color/wooden shade texture with following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and

2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with water to remove

excess sealer layer and make the surface further smooth after this wet rubbing, then surface is

applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler

coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is

further allowed to dry for 12 hrs.

Digitally signed by AMIT

S.No. Description of Item Unit Quantity Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and

melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry

As per DSR surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final

2023 melamine polish is applied with compressor pressure spray gun using melamine clear

polish and melamine thinner mixed in required proportion complete as per direction of

Engineer-in-Charge. (Finalo coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing double scaffolding system (cup lock type) on the exterior side of

building/structure, upto 25 metre height, above ground level, including additional rows of

scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube,

31 24.2 placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with

M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for

working platform etc. and maintaining it in a serviceable condition for execution of work of

cleaning and/ or pointing and/ or applying chemical and removing it thereafter.

The scaffolding system shall be stiffened with bracings, runners, connecting with the

building etc, wherever required, if feasible, for inspection of work at required locations with

essential safety features for the workmen etc., complete as per directions and approval of

Engineer-in-charge.

Note :- (1) The elevational area of the scaffolding shall be measured for payment

(2) The payment will be made once only for execution of all items for such works. Sqm 495.00 285.00 1,41,075.00

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all

complete as per directions of Engineer-in- Charge.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the

Engineer-in-Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres

lead) as per direction of Engineerin-Charge.

(a) Internal Work- Exposed on wall m 715.00 2.85 2037.75

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired

38 14.85 door shutters to existing door frames, including replacement of hinges with screws, etc. as No. 137.50 325.95 44,818.13

required, all complete as per the direction of the Engineer-in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material

within 50 metres lead as per direction of Engineer - in - charge.

39.1 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 49.50 2007.10 99,351.45

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars

40 15.3 and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- Cum 24.70 2928.10 72,324.07

Digitally signed by AMIT

S.No. Description of Item Unit Quantity Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work

41 15.5 (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Sqm 25.25 947.10 23,914.28

Engineer in-charge.

Demolishing brick work manually/ by mechanical means including stacking of

42 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction

of Engineer-in-charge..

Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Dismantling steel work in single sections including dismembering and stacking within 50 metres

44.2 15.17.2 Channels, angles, tees and flats Kg 935.00 1.90 1776.50

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50

45.1 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 800.00 60.50 48,400.00

45.2 15.23.2 For thickness of tiles above 25 mm and up to 40 mm Sqm 1000.00 93.40 93,400.00

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking

46 15.44 out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead

as per direction of Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes,

manually/ by mechanical means breaking lead caulked joints, melting of lead and making into

blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful

materials near the site and disposal of unserviceable materials within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials

by mechanical means, including loading, transporting, unloading to approved municipal dumping

ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all

lifts involved.

Providing and applying pop punning on wall 5 mm thick in proper line and level with required

material ,t&p , labour etc. all complete

Supplying and fixing SS Curtain rod on door and windows with required SS bracket. Rate

also include s/f end funnels /cap of approve design as per site requirement

Digitally signed by AMIT

S.No. Description of Item Unit Quantity Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Supply & fixing of 18 mm HDMR ply of size 1500 mm X 1200 mm having set top box holder size

1200 mm X 200 mm placed 100 mm from TV unit. All side with with 2mm laminate of approved

colour & provision of 6/16 Amp socket at top , Tv cable with switch plate. Two number of 6/16

Amp socket with one control switch above set top box point as per site condition

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water

curing for 48 hours.

(The rate includes preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.)

71 NS MODULAR KITCHEN WORK

Providing and fixing modular kitchen units for the kitchen platform and top wall units to

be fabricated by using HDHMR board of thickness 18 mm for making cabinets of

required sizes to match with the sizes SS kitchen jali units and size of the SS sink as per

following details :-

Front bottom, top sides and shelf partitions of the modular cabinets shall be of 18 mm thick

HDHMR boards of Mls Green panel Industries or approved equivalent and back portion

shall be of 8 mm thick HDHMR board or approved equivalent with necessary fittings, screws,

pasting materials, finishing all exposed cut surfaces with self adhesive PVC tape in matching

shade as that of laminate. The shutters and the pull out units shall be fixed 50 mm above the

kitchen floor level . All the inner portions of the cabinets shall be finished with 0.8 mm thick

laminate of white colour and approve make.The front face of the cabinet shall be finished

with1.0 mm ultra gloss laminate shade 21162 MR+ & 21069 MR+ Merino make The fittings like

handles, telescopic channels SS baskets, auto closing hinges shall be paid separately

under respective items below. Quoted rates shall be inclusive of labour, materials wastage

scaffolding fixing arrangements of top and bottom units with necessary dash fasteners,

repairing the damages, shifting the debris out of colony , CP , taxes etc all as required for the

execution of the work . Note :- Only front elevation area shall be measured for payment purpose.

a. Below platform units of depth 610 mm approx , Sqm 55.00 16902.00 9,29,610.00

b Top wall units of depth 300 mm approx. with shelves Sqm 33.00 12000.00 3,96,000.00

Providing and fixing stainless steel baskets and other fittings , accesories of modular kitchen

of Mls Hettich or approved equivalent make as per below mentioned details :-

a SS 304 cutlery baskets 15 x20 x4 inch Each 11.00 2950.00 32,450.00

Digitally signed by AMIT

S.No. Description of Item Unit Quantity Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

c SS 304 thali basket 15 x20 x8 inch Each 11.00 3300.00 36,300.00

d SS 304 plain baskets 19 x20 x4 inch Each 22.00 2500.00 55,000.00

f SS 304 plain basket 19x 20 x8 inch Each 22.00 3000.00 66,000.00

g SS baskets S —Corner basket Each 11.00 4000.00 44,000.00

h SS detergent pullout Each 11.00 1800.00 19,800.00

i SSdustbin ring Each 11.00 1770.00 19,470.00

j Bottle Pull out basket set of width 9" with standard depth pair 11.00 2400.00 26,400.00

n S/F Chimney 600 mm Faber make with vent pipe Basic model Each 11.00 14500.00 1,59,500.00

O kitchen sink 1050 mm Each 11.00 7500.00 82,500.00

Supply & fixing of HDPE Twine Bird Nert/Pigeon net for balcony Twine size 280D/15 ply , UV

sablized Sample of the same will be approved by Engineer In charge

77 NS Sliding Window ( 3 track 2 Glass Shutter & 1 Mesh Shutter)

Supply & fixing of uPVC sliding windows: Frame made from the extruded uPVC window profile

section of size 112 W X 50 H mm having outer wall thickness of 2.0 mm(+/-) and 3 box multi

chamber construction, white in finish, duly reinforced with 1.2 mm thick GI Section. Frame shall

have three track configuration, two for sliding shutter and one for mosquito mesh shutter. Verticle

memeber of frame which bears the sliding shutter load shall have aluminium rail/track for smooth

sliding of shutter rollers. All the four corners shall be mittered cut & thermal welded so as to

form window frame. Frame shall be milled with drain and air equalizer hole in order to be

water tight and for drainage of accumulated water, if any, to outer side. Shutter: The Shutter of

sliding window shall be made of 42w x 69h mm Extruded 3 box multi chamber uPVC Window

Profile Section of white colour having outer wall thickness of 2.0mm (+/- 0.2mm) provided with

reinforcement of 1.5mm thick GI section duly metered cut & thermal welded at all coners and

fitted with uPVC glazing bead of size25 x 20 mm with inner and outer co-extruded EPDM/TPE-E

weather seal gaskets alongwith 6mm thick ISI make plain float glass. Mesh shutter shall be

made of 39w x 69h mm Extruded 3 box multi-chamber UPVC Window profile section of

white colour having outer wall thickness of 2.0mm (+/- 0.2mm) provided with reinforcement of

1.5mm thick GI section duly mitered cut & thermal welded at all corners and fitted with

pylon/polymer mesh and rollers/pully. (Prizma, Fenesha & Aluplast) Sample of the same will be

approved by Engineer In charge

1 9.1.1 Second class teak wood (door frame) cum 6.40 131577 841570

2 NDSR New Doors manufacturing + Installation Nos 132.00 18000 2376000

NDSR MORTISE LOCK AND HANDLE Each 132.00 1900 250800

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than

9.97 grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Digitally signed by AMIT

S.No. Description of Item Unit Quantity Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating

9.101 not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade,

6 with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 132.00 350 46200

NDSR Dempness of wall treatment Sqm 836.00 180 150480

2.35.4 Antitermite treatment Sqm 1540.00 65 100100

7 NDSR AC DRAINAGE POINT Nos 33.00 6000 198000

Cost index @ 1.03 on DSR 10215575.37

Reduce GST MF @ 0.973 as per CPWD circular dated 08.08.2024 9939754.84

Digitally signed by AMIT

PLUMBING FIXTURE WORKS

S.No. Description of item Unit Qty Rate MR Amount

Supplying and fixing looking mirror of 5 mm thick looking glass with bevelled edges and holes as per site

requirement of Modi Gaurd or other approved equivalent Rates are inclusive of fixing of glass with SS stud all

B/1 complete as directed by Engineer Incharge Sqft 49.00 354.00 17,346.00

Providing and fixing in position Jaguar (Item Code no. ACN:1111 NM) or other approved equivalent quality

B/2 Towel rod of 24" length with brackets fixed over tiles with rowel plug and approved quality screws including Each 34.00 1,652.00 56,168.00

cutting and making good the tiles.

Providing and fixing in position Jaguar (Item Code no. ACN: 1121) or other approved equivalent qualityTowel

B/3 ring fixed over tiles with rowel plug and approved quality screws including cutting and making good the Each 34.00 1,475.00 50,150.00

damages of tiles etc. all complete as required at site as directed by the Engineer-in-Charge.

Providing and fixing in position Chlorinated Poly Vinyl Chloride (CPVC) pipe SD-11 of approved make in

desired thickness having thermal stability for hot and cold water supply of including all CPVC plain & brass

threaded approved fittings and fixing the pipe with clamps & screws as per the site equirements at 1.00 meter

C/C etc. all complete.

(b) 40 mm Nominal dia Rmt 132.00 590.00 77,880.00

c) 65 mm dia pvc pipe with fitting Rmt 176.00 590.00 1,03,840.00

d) 15. mm dia brass ball valve in kitchen shaft No. 33.00 1,180.00 38,940.00

Supplying and fixing position the following approved make fittings & fixtures,including carefully removing the

existing old/damaged fittings & fixtures and handing over the same

Washbasin divertor with face plate sigel lever flange of continental series of Hinddware or other approved

equivalent make.

(ii) 15 mm dia. C.P. Brass bib cock with nozzle wall CP. flange of approved equivalent make. Each 34.00 1,003.00 34,102.00

15 mm dia. C.P angle valve with wall CP. flange of continental series of Jaquar or other approved equivalent

make. VGP-CHR- 81053

15 mm dia. C.P. Brass central hole single lever wash basin mixer of Jaquar Model VGP-cHR— 81005N B or

(iv) other approved equivalent make including plumbing fittings and 450 mm long braided hoses etc. all complete Each 34.00 4,720.00 1,60,480.00

as required at site.

15 mm dia. C.P. 4 way high flow single lever divertor with cover plate, c.p pin. Including all plumbing fittings &

(v) fixtures etc all complete as required at site as directed by ENGINEER IN CHARGE . Model ALD- CHR -079N Each 34.00 5,625.00 1,91,250.00

& VGP— CHR-81083 K

15 mm dia C.P spout of approve design with C.P Handshower and c.p flexible tube of required length Jaquar

make Model SPJ-CHR-81463 ,HSH-CHR-35537

(vii) C.P Overhead shower 150 X150 mm with 450 mm long C.P Shower Arm Jaquar Model OHS- CHR-1605 No. 34.00 4,687.00 1,59,358.00

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate MR Amount

100mm dia. Heavy quality stainless steel Jali (grating) with or without holes for waste pipe of floor / Nahani

trap etc all complete as required at site as directed by Engineer In charge

(ix) Heavy quality CP Soap dish of Jaquar (codeno:ACN: 1131N) or approved equivalent make. Each 44.00 650.00 28,600.00

15 mm dia .C.P brass two way bib cock model no. FUS-CHR-29041 with hand shower (health faucet) model

(x) no. ALD- CH R-585 with flange of Jaquar or approved equivalent make etc all complete as required at site as Each 34.00 4,604.00 1,56,536.00

directed by the Engineer-in-Charge.

(xi) 15 mm dia. C.P brass conceled stop cock with upper body plate Jaquar make Model VGP—CHR-81083K Each 33.00 875.00 28,875.00

Providing and fixing glass shelf of Jaguar make [Code No.CAN -1171N] including bracket etc. all complete as

directed by ENGINEER IN CHARGE.

(xiii) Providing and fixing table mounted sink mixture model no.FLR-CHR- 5179B Jaquar Each 34.00 6,434.00 2,18,756.00

xiv S/F 450 mm long pvc connection Each 11.00 177.00 1947.00

Providing & fixing in position Hindware, Parry ware or other approved make 1st quality vitreous china glazed

B/6 wall mounted European WC of standard size with either P trap as per site requirement and providing & fixing Each 34.00 17,000.00 5,78,000.00

conceled cistern with required material ,labour etc i/c cover plate all complete Model Enigma Hindware

Providing and fixing in position 100 mm dia. and 75mm outlet pvc Nahani/ floor trap having seal of 40 mm to

B/7 50mm, approved equivalent ISI mark having necessary length of extension pipe wherever required Each 56.00 885.00 49,560.00

including cutting of concrete and repairing with concrete after completion all complete.

Supplying and fixing table top square washbasin 40x40 cm of Jaquar approve model with c.p waste coupling

B/8 and heavy duty waste pipe all complete as required at site as directed by Engineer-in-Charge.Model JDS- Each 34.00 8,850.00 3,00,900.00

Fabricating, supplying and fixing Vanity of required size approx 30 x 20 inch made up of 18 mm HDHMR

B/10 board,.8 mm laminate on all internal faces and 1.0mm on shutter with auto closing hinges and fixing of same No. 34.00 15,650.00 5,32,100.00

with fastner etc. Rate are inclusive of all complete.

Providing and fixing 6kg pressure PVC pipe for toilet internal and external fitings complete with fixing

acessories as per required

Total Rs. 38,81,380.00

Digitally signed by AMIT

ELECTRICAL & ALLIED WORKS

S.No. Description of Item Unit Quantity Rate (Rs) Amount

Code Amount(Rs)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed

1 1.10 medium class PVC conduit, with modular switch, modular plate, suitable Gl box

and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit, 2 way

modular switch, modular plate, suitable Gl box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed medium class PVC conduit along with 1 No.

4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing

Wiring for circuit/ submain wiring along with earth wire with the following sizes of

4 1.14 FRLS PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required.

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable as earth wire in existing surface/

recessed steel/PVC conduit including dismantling as required.

Digitally signed by AMIT

S.No. Description of Item Unit Quantity Rate (Rs) Amount

Code Amount(Rs)

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC nsulated copper

conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable as earth wire in existing surface/ recessed steel/PVC conduit

including dismantling as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor,

single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed

8 copper conductor, unarmored telephone cable in the existing surface/ recessed

steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG 6 grade, 0.7 mm solid copper

9 1.19 conductor PE insulated, shielded with fine tinned copper braid and protected with Metre 990.00 47.00 46,530.00

PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of steel conduit along with accessories in

10 1.20 surface/recess including painting in case of surface conduit, or cutting the wall and

making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with

11 1.21 accessories in surface/recess including cutting the wall and making good the same

in case of recessed conduit as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on

12 1.31 surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet No. 320.00 477.00 1,52,640.00

and 5/6 A modular switch, connections etc.as required.

Digitally signed by AMIT

S.No. Description of Item Unit Quantity Rate (Rs) Amount

Code Amount(Rs)

Supplying and fixing suitable size Gl box with modular plate and cover in front on

13 1.32 surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular No. 320.00 586.00 1,87,520.00

socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, V, complete as

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/

recessed Steel/ PVC conduit as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell

point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

16 1.55 conductor single core cable in surface/ recessed PVC conduit, and earthing the

point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc.

Add GST MF @ 1.0633 on SL No. 3 4070961.01

Reduce GST MF @ 0.973 as per CPWD circular dated 08.08.2024 3961045.07

Digitally signed by AMIT

ELECTRICAL FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Dismantling Carefully disconnection and removing all fans, fittings, decorative lights, water purifier, geysers,

1 wires, conduits, casing capping, switch boards/ DB etc. in flat and keeping reusable items like exhaust fans JOB 11.00 8500.00 93,500.00

ceiling/wall fans, LED batten water purifier, geyser etc.

2 Supplying ,Fixing, testing and commissioning of following Electrical items with necessary hardware

SITC of LED tube light fixture of 4’ length 36 Watt white colour LED tube light on new white colour square

A PVC block and using two/three core copper conductor PVC insulated preferably white colourcable from tube No 132.00 540.00 71,280.00

light fixture to ceiling rose as directed by Engineer In Charge.

SITC of 48 inch BLDC Ceiling fan of approve shade with all necessary mounting accessories with step

regulator To provide 3 mm thick Bakelite round plate with required hardware near the ceiling fan hook.

PVC exhaust fan of 200MM size with pvc louver protection complete with required fittings and hardware etc.

C and using two/three core copper conductor PVC insulated referably white colourcable from exhaust fan to No 35.00 1652.00 57,820.00

ceiling rose as directed by Engineer In Charge.

D SITC of 25 litre horizontal/vertical geyser i/c all necessary hardware material etc .all complete. No 35.00 10000.00 3,50,000.00

3 15 watt LED PANEL

SITC of 15 watt LED panel light at entrance, balconies and kitchen both surface and conceled type i/c

connection and testing complete.

B SITC OF 18/20 Watt LED light on ceiling with required hardware material all complete (Dinning room) No 35.00 550.00 19,250.00

SITC of cabin fan 12 inch size on ceiling bwith required material Crompton,Havells make No 20.00 3000.00 60,000.00

5 LED tube light

10 Watt 2 ft led fitting, White Colour No 35.00 250.00 8750.00

Total Rs 9,76,850.00

Digitally signed by AMIT

Waterproofing treatment Works

S.No. Description of Item Unit Quantity Rate (Rs) DSR Amount(Rs)

Demolishing brick tile covering in terracing including stacking of serviceable material

and disposal of unserviceable material within 50 metres lead.

Demolishing cement concrete manually/ by mechanical means including disposal of material

2 within 50 metres lead as per direction of Engineer - in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 1.10 2434.25 2,677.68

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or

waste material by mechanical transport including loading, transporting, unloading to

approved municipal dumping ground for lead upto 10 km for all lifts, complete as per

directions of Engineer-in-charge.

22.14 Grading roof for water proofing treatment with

4 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal

Providing and laying in situ seven course water proofing treatment with APP

(Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of

bitumen primer @0.40 litre per sqm. 2nd, 4th & 6th courses of bonding material @1.20

kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS:

702, 3rd and 5th layers of roofing memebrane APP modified Polymeric

membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated

with centre cores as 100 micron HMHDPE Film sandwiched on both sides with polymeric

mix and the polymeric mix is protected on both side layer shall be finished with brick tiles

of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 Fine sand)

mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of

cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles

shall be paid for separately).

Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1

cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with

ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape

6 11.44 having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron Sqm 22.00 954.15 20,991.30

& length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement

mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg

of cement, all complete as per direction of Engineer-in-charge.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

7 12.21 aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement Meter 100.00 305.15 30,515.00

: 3 fine sand) as perstandard design :

Digitally signed by AMIT

13.3 20 mm cement plaster of mix :

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size)

over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3

(1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making

and finishing the outlet

Cost index @ 1.03 on DSR 1,54,645.85

Reduce GST MF @ 0.973 as per CPWD circular dated 08.08.2024 1,50,470.42

Digitally signed by AMIT