Supply, Erection, Testing & Commissioning work of Electrical and Mechanical equipments with Modification/ Augmentation of Sarthana Sewage Pumping Station with Operation and Maintenence work for 05(Five)Years of Sarthana Zone, Drainage Department of Surat Municipal Corporation.

Name of Work:- Supply, Erection, Testing & Commissioning Work of Electrical and

Mechanical Equipments with Modification/ Augmentation of

Sarthana Sewage Pumping Station with Operation and Maintenance

Work for 05(Five)Years of Sarthana Zone, Drainage Department of

Surat Municipal Corporation.

SCHEDULE-B2 & B3 OPERATION & MAINTENANCE WORK .....................................................

1 The Schedule of quantities and Rates are to be read for the purpose of

pricing in conjunction with instructions to tenderers, technical

specifications, drawings and conditions for contract.

2 The price quoted in the summary of costs, sheets of schedule of

quantities and rates shall be of all-inclusive value for the work described

including all cost and expenses which may be required for the execution

of the work described together with all general risks, liabilities and

obligations set further or implied in the documents on which the tender

3 The quantities furnished are approximate. In the event of actual

quantities varying from those furnished herein or items deleted or added

the percentage (Plus / minus) quoted for the entire work shall remain

firm and no extra claims in this respect will be entertained. The payment

shall be made based on the actual quantities in the complete work.

4 Percentage (Plus/Equal/ Minus) quoted by Tenderer shall be firm even if

the scope in the contract reduced/increased.

5 Percentage (Plus/Minus) and the total amount entertained in the

5 Percentage (Plus/Minus) and the total amount entertained in the

summary of cost, sheet of schedule quantities and rates shall be given on-

6 Detailed specifications of items of work are described in the Technical

Specifications. It gives guidelines to the reference of relevant clauses of

specification and mode of measurement. Tenderer shall read this in

conjunction with other technical specifications and quote rates

7 The Quality Assurance Plan provided shall be strictly followed.

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

Supply, Erection, Testing & Commissioning Work of Electrical and

Mechanical Equipments with Modification/ Augmentation of Sarthana Sewage

Pumping Station with Operation and Maintenance Work for 05(Five)Years of

Sarthana Zone, Drainage Department of Surat Municipal Corporation.

I/We, the undersigned, hereby tender for carrying out the work described in the schedule

subjected to the conditions mentioned in various sections and subsections of this tender

Should this tender be accepted, I/We hereby agree to abide by and to fulfill all the terms and

provisions of specifications and conditions of contract and default thereof of forfeit and pay

to Municipal Corporation the sum of money mentioned in the said condition.

The Earnest Money Deposited by me / us with tender may be forfeited to The SURAT

MUNICIPAL CORPORATION, if I /We do not deposit security deposit in accordance

with the relevant clause of the conditions of contract, otherwise the said sum of

4,33,400.00/-(Without GST) shall be retained by the Municipal Corporation as any

account of such security as, aforesaid.

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

3 . NAMEOFWORK: -

Supply, Erection, Testing & Commissioning work of electrical and mechanical

equipments with Modification/Augmentation of Sarthana Sewage Pumping

Station with operation and maintenance work for 05(Five) years of Sarthana

zone, drainage department of SMC.

ESTIMATED COST: 4,33,39,955.00/-[Excluding GST]

TENDERER’SBIDFORCAPITAL WORK:

PERCENTAGEEQUAL/ ABOVE/BELOWOF Rs.3,08,51,200.00/-

IN FIGURES: (STRICTLY ONLINE)

INWORDS: (STRICTLY ONLINE)

TENDERER’S BID FOR O&M Work DURING AUGMENTATION PERIOD

PERCENTAGEEQUAL/ ABOVE/BELOWOF Rs. 1,47,917.00/-

INFIGURES:(STRICTLY ONLINE)

INWORDS: (STRICTLY ONLINE)

TENDERER’S BID FOR O&M WORK:

PERCENTAGEEQUAL/ ABOVE/BELOWOF Rs.1,02,70,000.00/-

INFIGURES: (STRICTLY ONLINE)

INWORDS: (STRICTLY ONLINE)

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

4. SCHEDULE- B ABSTRACT

Sr. No. Description Total Amount

Sr. No. Description Total Amount

A Electro-Mechanical (Capital) Work for SARTHANASPS

O&M Work for SARTHANA SPS AUGMENTATION PERIOD

(The cost towards augmentation work shall be sanctioned on a

monthly basis and shall be payable based on the actual cost

incurred during the execution of augmentation work)

C O&M Work for SARTHANA SPS

Total Amount of Schedule B

Total Amount of Schedule B

(Excluding GST)

SCHEDULE-B1ELECTRO-MECHANICALWORK

SR. DESCRIPTION QTY. UNIT UNIT TOTAL

MECHANICAL ITEMS

1 NONCLOG SEWAGE 2 Set 13,05,047.70

SUBMERSIBLE PUMP SETS

Supply, installation, testing and

commissioning of Non Clog sewage

Submersible Pump Sets having with

motor as per specification.

Suitable for Capacity:

LPS,Head: 30 Mtr.,

2 NON CLOG SEWAGE 2 Set 9,79,080.00

SUBMERSIBLE PUMP SETS

Supply, installation, testing and

commissioning of Non Clog sewage

Submersible Pump Sets having with

motor as per specification.

Suitable for Capacity: 300 LPS,

3 NON RETURN VALVE 4 Set 63,550.21

Supply, installation, painting,

testing and commissioning of Non-

Return Valve for the discharge line

as per Tender Specification.

Size: 350 mm Dia size

Location: Delivery line

4 C.I. DISMANTLING JOINT 4 Nos. 22,058.00

Supply, Installation, Testing and

Commissioning of C.I.Dismantling

Joint as per IS 1538, Design

Temperature: 50 C.

Size: 350 mm Dia

5 KNIFE GATE VALVE 4 Set 60,188.00

Supply, installation, painting,

testing and commissioning of Knife

gate valves for the discharge line of

Pump Sets as per Tender

Size: 350 mm Dia (Manually

Location: Delivery line

6 ELECTROMAGNETIC FLOW 1 No. 3,94,936.26

Supply, Installation, Testing and

Commissioning of Electromagnetic

Flow Meter for Common Header at

Sarthana SPS as per Detailed

Tender Specification.

7 ELECTROMAGNETIC FLOW 2 No. 7,22,578.24

Supply, Installation, Testing and

Commissioning of Electromagnetic

Flow Meter for Common Header at

Puna and Magob SPS as per

Detailed Tender Specification

8 C.I. DISMANTLING JOINT 1 Nos. 1,07,433.96

(Common Header)

Supply, installation, testing and

commissioning of C.I. Dismantling

Joint as per IS 1538, Design

Temperature: 50 C.

Size: 800 mm Dia

9 C.I. DISMANTLING JOINT 2 Nos. 3,30,870.00

(Common Header)

Supply, installation, testing and

commissioning of C.I. Dismantling

Joint as per IS 1538, Design

Temperature: 50 C.

Size: 1400 mm Dia

10 PRESSURE GAUGE 4 Nos. 3,042.12

Design, Supply, Installation,

Testing and Commissioning of

Diaphragm sealed Pressure

Gauge.(Each Pumpsets)

Range: 150 mm Dial - 0 to

11 PRESSURE TRANSMITTER 1 Nos. 29,438.47

Design, Supply, Installation,

Testing and Commissioning of

Pressure Transmitter.

(Common Header)

12 C.I. FITTINGS & SPECIALS 1000 Kgs. 58.58

Supply, installation, testing,

painting and commissioning of C.I.

double flanged suction, delivery &

header pipe conforming to IS

7181or IS1537, Class B technical

specifications. The length and size

of the pipes and specials are

indicative and shall be designed and

proposed asper the pump model.

13 M.S. FABRICATION WORK 2500 Kgs. 98.98

For Jalias, Grating at Various

Opening, EOT Crain Plat Form etc.

14 S.S. FABRICATION WORK 24600 Kgs. 237.80

Various S.S Fabrication Work at

Pumping Station for Manual Screen

and Ladder, Nut and bolt for C.I.

15 Charges for Bypass arrangement 1 Job 1,27,118.64

to provide, operate & maintain

the pumping machineries with all

required manpower, electrical

and mechanical equipment with

(DG set in Case of power failure)

Till satisfactory commissioning of

new installation &As per detailed

16 Desilting Work for Wet Well, 1 Job. 84,745.76

Screen Chamber, Grit Chamber and

SPS with requires safety measures

and detail scope of work

17 5 TONNE HOT 1 Set 6,32,512.50

Providing & erecting H.O.T. crane

with electrically operated hoist,

geared travelling trolley with

Fifteen meter or as per site

requirement lift complete with long

control panel & down pendant

control block, brake, safety device,

cables form motor to starter panel &

other required accessories & tested

as per IS Specifications.

Capacity: 5 Ton,

Span: as per site.

18 Dismantling, Loading, 1 Job. 42,372.88

Transportation and Unloading of all

existing pumping station's

accessories such as pump set,

screen, panel, cable, valves, gates

etc. at SPS to SMC Store/

warehouse or within Surat limit.

19 Supplying & Fixing SMC 20 Sq. 5,897.37

Chequered plate having 12 mm Mtr.

thickness, made out of SMC

Confirming to IS 13410 & by Hot

press Compression Moulding

technique Suitable cut & fixed with

MS Angle Frame to Fit Trench

Widths as per site requirement

approved. by engineer in charge.

20 Supplying & erecting approved 1 Nos. 15,129.77

make self-priming domestic

Monoblock water pump with 1 H.P

motor, suitable for operation on

volts, 50c/s. AC supply with

metallic flange, and M.S. impeller

delivery for lifting line water to

21 Supply, Installation, Testing & 40 Rmt. 580.15

Commissioning of FRP Chequered

22 Supply, Installation, Testing and 40 Rmt. 1,784.69

Commissioning of Railing as per

Detailed Tender Specification

23 AIR VALVE 1 Nos. 41,866.52

Supply, Installation, Testing and

Commissioning of Air valve with

isolating sluice valve for Common

header line as per Detailed Tender

Size: 200 mm Día

24 Civil Construction (Chamber 3 Nos. 68,138.56

forFlowmeter, Air Valve etc.) and

repairing, modification,

waterproofing works (Pump

house, HT Room, Common

Header Valve Chamber, Bypass

Valve Chamber etc.) as per latest

IS and as per SMC in-charge

25 CLAMP ON ULTRASONIC 0 Nos. 1,84,018.97 -

Supply, Installation, Testing and

Commissioning of Clamp on

Ultrasonic Flow Meter for Common

Header as per Detailed Tender

Specification. size (800 mm -01qty &

1400 mm -02qty)

ELECTRICAL ITEMS

1 HTMC PANEL 1 Lot 7,25,170.00

Supply Installation Testing

Commissioning of HTMC Panel

2 22 KV H.T. CABLE 120 Mtr. 1,246.61

Supply, laying, connection, testing

and commissioning of 22 KV HT

Size: 3 c x 95 sq.mm XLPE (E)

3 H.T. CABLE TERMINATION 8 Nos. 4,600.00

Heat shrinkable type outdoor H.T.

cable end terminations suitable for

22 KV, 3c x 95 sq.mm. XLPE (E)

armoured cable.

4 22 KV HT PANEL 1 Nos. 29,01,784.75

SETC of 22 KV, 630 A, indoor,

extensible type, draw out type

Single HT vacuum circuit breaker

panel (1 No. Incomer + 2 Nos.

5 DISTRIBUTION 2 Nos. 26,16,484.36

22/0.433 KV, 800 KVA ONAN

outdoor type step-down transformer

as per tender Specifications, Data

sheet, IS 1180 and relevant and as

per given description etc.

6 CAPACITOR FOR REACTIVE 1 Lot 2,016.75

POWER COMPENSATION

100 KVAR Fixed Capacitor For

/0.433 KV Distribution Transformer

7 Foundation for Transformer 2 Sets 69,361.91

8 Fire Protection Wall for 1 Set 68,486.90

9 POWER CONTROL CENTER 1 No. 21,62,571.61

Supply, erection, testing &

commissioning of Power Control

Centre panel as per tender

Specifications, Data sheet, IS and

as per given description etc.

10 STARTER PANEL -1 & 2 3 Nos. 4,31,775.00

Supply, erection, testing &

commissioning of Soft Starter with

Capacitor Bank as per IS,

specifications and technical

specification & data sheet

Suitable for Capacity:

LPS,Head: 30 Mtr.,

11 STARTER PANEL -3 & 4 3 Nos. 3,65,822.00

Supply, erection, testing &

commissioning of Soft Starter with

Capacitor Bank as per IS,

specifications and technical

specifications& data sheet

Suitable for Capacity:

LPS,Head: 30 Mtr.,

12 JUNCTION BOX 6 Nos. 19,695.00

Supply, erection, testing &

commissioning of Junction Box for

Pump set as per tender

Specifications, Data sheet, IS and as

per given description etc.

13 Supply, laying, testing & 250 Mtr. 1,223.11

commissioning 1.1 kV grade, XLPE

insulated, stranded Aluminium

conductor, galvanised steel flat

strip / round wire armoured,

extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall

surface with necessary clamps / in

existing cable trench / cable trays /

conduit / pipe sleeves at road

crossing or floor as per site

requirement) conforming to

IS:7098 (Part-1) & IEC:60502

Location : Transformer to PCC

Size : 3½ c x 400 sq.mm (6 Run)

14 - Do as above – 50 Mtr. 628.22

Location: PCC Panel to STARTER

Size: 3½ c x 185 sq.mm (2 Run)

15 - Do as above – 50 Mtr. 628.22

Location: PCC Panel to STARTER

Size: 3½ c x 185 sq.mm (2 Run)

16 - Do as above – 50 Mtr. 628.22

Location: PCC Panel to Spare

Size: 3½ c x 185 sq.mm (2 Run)

17 - Do as above – 100 Mtr. 539.34

Location: STARTER PANEL to JB

to Pump set - 1 to

Size: 3 c x 185 sq.mm (2 Run)

18 - Do as above – 60 Mtr. 791.84

Location: LT panel to APFC

Size: 3½ c x 240 sq.mm (3 Run)

19 - Do as above – 60 Mtr. 97.97

Location: LT panel to Light

Distribution Board

Size: 4 c x 10 sq.mm

20 Supply, laying, testing & 50 Mtr. 142.41

commissioning of 1.1 kV grade,

XLPE insulated, stranded Copper

conductor, galvanised steel flat

strip / round wire armoured,

extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall

surface with necessary clamps / in

existing cable trench / cable trays /

conduit / pipe sleeves at road

crossing or floor as per site

requirement) conforming to IS:7098

(Part-1) & IEC:60502 (Part-1) of

following sizes

Location : LT panel to Crain,

Instrument Panel etc.

Size : 4 c x 4 sq.mm

21 - Do as above – 50 Mtr. 81.81

Location: Miscellaneous Work

Size: 4 c x 2.5 sq.mm

22 Supply, laying, connection, testing 200 Mtr. 347.46

and commissioning of XLPE

Copper conductor YWY- Actuator

panel and other panel/work as per

Size: 16 c x 1.5 sq.mm.

23 Providing &fitting of crimping type 24 Nos. 1,532.17

Cable Terminals (Lugs) conforming

to IS and heavyduty Double

Compression Brass Cable Glands

(nickel-plated) with washers &

rubber ring conforming to IS, of

following type & sizes:

Size: 3½ c x 400 sq.mm (6 Run)

24 - Do as above – 8 Nos. 628.22

Location: PCC Panel to STARTER

Size: 3½ c x 185 sq.mm (2 Run)

25 - Do as above – 8 Nos. 628.22

Location: PCC Panel to STARTER

Size: 3½ c x 185 sq.mm (2 Run)

26 - Do as above – 8 Nos. 628.22

Location: PCC Panel to Spare

Size: 3½ c x 185 sq.mm (2 Run)

27 - Do as above – 16 Nos. 628.22

Location: STARTER PANEL to

JBtoPump set - 1 to

Size: 3 c x 185 sq.mm (2 Run)

28 - Do as above – 6 Nos. 904.96

Location: LT panel to APFC

Size: 3½ c x 240 sq.mm (3 Run)

29 - Do as above – 4 Nos. 129.28

Location: LT panel to Light

Distribution Board

Size: 4 c x 10 sq.mm

30 - Do as above – 20 Nos. 132.31

Location: LT panel to Crain,

Instrument Panel etc.

Size: 4 c x 4 sq.mm

31 - Do as above – 20 Nos. 89.89

Location: Miscellaneous Work

Size: 4 c x 2.5 sq.mm

32 Termination Using Double 18 Nos. 415.25

compression brass/steel cable

glands and crimping type bimetallic

lugs / sockets of XLPE Copper

conductor YWY- Actuator panel

and other panel/work as per IS

Size: 16 c x 1.5 sq.mm.

33 Supply & laying GI perforated type 150 Rmt 703.97

cable trays with returned edge/

flange, fabricated from 2.0 mm thk

sheet steel in the standard length of

2.5 mtrs, duly hot dipped

galvanized after fabrication as per

including accessories such as

coupler plates/ fish plates, bends,

tees, reducers, elbows, covers and

electro-galvanized hardware etc,

erected on existing support as per

specification and instruction of

engineer in charge.

(d) 450(W) x 35(H) x 2.0 mm Thick

37 Supplying & erecting approved 50 Mtr 89.02

make CAT 6E LAN cable

38 Providing & laying. R.C.C. Hume 20 Rmt. 294.44

pipe for cable to be laid 90 cms.

below ground across the road

crossing or on floor with necessary

material in an approved manner and

making the ground as per original.

39 Providing & laying. R.C.C. Hume 20 Rmt. 262.77

pipe for cable to be laid 90 cms.

below ground across the road

crossing or on floor with necessary

material in an approved manner and

making the ground as per original.

40 Making trench in soft soil of 60 Rmt. 46.22

suitable width of 90 cms deep for

laying cable or locating the fault all

over the run and backfilling the

same and making the surface as

41 Approved make Earth fault Relay 4 Nos. 4,686.23

suitable to mount with inter

connection to moulded case circuit

breaker having CT ratio & MCCB

rating as following along with shunt

trip 220V AC. with all internal

connections & complete erected in

M.S.housing. (1) 15 A -100 A, CT

Ratio 1/100 or higher/as per SMC

42 Approved make RCCBs 4 Nos. 1,968.64

conforming to IS: 12640 and having

sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA

and suitable for operation on single

phase 240 V. having characteristic

of quick action & tripping with all

advance feature & do not

incorporate any electronic

component. for following Max.

rating erected as directed (i)

Amps. DP Cat. III

43 Approved make RCCBs 4 Nos. 2,567.80

conforming to IS: 12640 and having

sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA

and suitable for operation on single

phase 240 V. having characteristic

of quick action & tripping with all

advance feature & do not

incorporate any electronic

component. for following Max.

rating erected as directed (i)

Amps. FP Cat. III

44 Supplying & fixing box for housing 5 Nos. 273.90

ELCB / ELCB + MCB combination

made of 18 SWG sheet steel duly

powder coated with gasket, dust &

vermin proof bakelite shield two

earthing terminals for following

type of RCCB, ELCB, ELCB +

MCB [a] For 2 pole

45 Supplying & fixing box for housing 5 Nos. 445.08

ELCB / ELCB + MCB combination

made of 18 SWG sheet steel duly

powder coated with gasket, dust &

vermin proof bakelite shield two

earthing terminals for following

type of RCCB, ELCB, ELCB +

MCB [a] For 4pole

46 Supplying & erecting in earth pit of 2 Nos. 10,592.16

minimum bore dia. 225mm size

ASH or approved make Safe

Earthing Electrode consisting Pipe

in- Pipe Technology as per IS 3043-

1987 made of corrosion free

G.I.Pipes having Outer pipe dia. of

80 mm having 80-200 Micron

galvanising, Inner pipe dia. of

mm having 200-250 Micron

galvanising, connection terminal

dia. of 14 mm with constant ohmic

value surrounded by highly

conductive compound with high

charge dissipation suitable for

following type of applications.

(a) For Electrical Installation

covering Transformer Neutrals,

Lightning arrester Earthing,

Instrumentation (like PLC Panel,

SCADA)i.e. independent Earthing

located in other than normal soil

i.e.Soft Rock, Marshy Soil etc..

-Length of Pipe: 3 Mtrs.

-Back filling Compound:2 nos Bags

47 Supplying & erecting funnel type 4 Nos. 2,311.02

earthing having earth plate of

following size burred in specifically

prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt

with alternate layers of charcoal &

salt, 20mm.dia. G.I. pipe with

Funnel with a wire mesh for

watering & bricks masonry block,

C.I. Cover complete as per para

of IS 3043 with necessary length of

double Galvanised Iron / copper

earth wire No 6 SWG bolted with

lug to the plate and covered in

mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest

switch gear with end socket as per

direction & duly tested by earth

tester confirming to IS with

following specification (A) With

x 30 x 0.35 cms: C.I. earth plate

Copper earth Plate

49 Supply &erectionrequired size 70 kg 794.31

Copper strip for earthing of H.T.

OCB / ACB/ Transformer, LT panel

board, Motors etc. using copper

50 Supply &erectionrequired size HOT 100 kg 77.03

deep Galvanised iron strip for

earthing of H.T., OCB/ ACB/

Transformer LT panel board,

Motors etc. using proper clamp.

51 Supply & erection HOT deep 120 kg 77.03

Galvanised iron strip wire 12 SWG.

52 Supply of necessary materials and 1000 kg 98.98

M.S. fabrication work (For

Squarebar,flats,Chequeredplates,For

C channels, angles etc for Panel

Platform, ladder, grills etc.) with oil

paint as per details specification.

53 Supplying rubber matting of 6 mm 10 Sq. 983.58

thickness as per IS 5424 and of Mtr.

required length and breadth with

good insulation property.

54 Supplying rubber matting of 12 mm 4 Sq. 3,081.36

thickness as per IS 5424 and of Mtr.

required length and breadth with

good insulation property.

55 Warning signs (22 KV & 415 V) 8 Nos. 448.64

56 Supplying stand first AID box with 4 No 299.58

antiseptic cream, medicine for use

on wounds due burn, crepe

bandage, gauge bandage, medicated

ready to use bandage (Band-aid)

adhesive tape for medicinal user,

Scissors, anti-septic solution

(savlon or similar) etc. (All above

contents shall be of standard makes)

57 Providing printed instruction chart 2 Sets 128.39

both in English and Gujarati and

duly framed with front glasses for

treatment of person suffering from

Electric shock.

58 Supplying and erecting floor 4 Nos. 1,797.46

mounting stand for keeping four

nos. of FIRE buckets comprising

1500 mm in length, 900 mm height

frame made out of 30mm X 30 mm

X 4 mm angle iron with cross

supports for legs, welded with

hooks and duly painted with one

coat of red lead and two coats of

approved enamelled silver paint.

59 10 W LED lampoperated self- 4 Nos. 1,251.40

contained emergency light with dry

type maintenance free battery.

60 LIASONING CHARGES 1 Job 20,690.85

Liasoning fees for preparing

necessary documents and drawings

for getting N.O.C from supply co

and Electrical Inspector for

charging the installation. (All

statutory fees will be paid by SMC)

61 Cup Board 1 Nos. 7,252.21

62 Heavy Duty Office Chair 4 Nos. 3,113.76

63 Safety Helmet 6 Nos. 129.45

64 Development of graphics of SPS & 1 Lot 26,897.83

connecting automation system of

SPS to SCADA Room.

65 Supply of SCADA runtime 1 Nos. 98,540.44

software with lifetime license and

other required connectivity of PLC

with central control room at

drainage office.

66 Supply of Desktop PC with UPS 1 Nos. 77,600.96

and other accessories as per detailed

technical specifications

67 Supply, Installation, Testing and 1 No. 3,630.90

Commissioning of Voltage

Stabilizer and other accessories as

per Tender specification.

68 INFORMATION BOARD AT 2 Lot 3,672.68

PUMPING STATION

Supply of Pumping Station

information board with printed eco

vinyl sheet with wooden frame, size

69 CCTV CAMERA SYSTEM 1 Nos. 67,196.63

Supply, Installation, Testing and

Commissioning of Min 7 Nos.

CCTV camera System.

70 Biometric machine 1 Nos. 15,296.61

SETC of Biometric Attendance

System as per detailed Tender

Specifications.

71 LIASONING CHARGES OF 2 Nos. 20,690.85

FACTORY LICENSE

Liasoning fees for preparing

necessary documents and drawings

for getting factory license from

Factory Inspector for Karanj and

Modi Maholla SPS as per details

scope mentioned in tender.(All

statutory fees will be paid by SMC).

TOTAL ESTIMATED AMOUNT OF WORK

SCHEDULE-B2 DURING AUGMENTATION PERIOD OPERATION & MAINTENANCE

DESCRIPTION QTY UNIT RATE

All in all Operation and Maintenance Cost for

Augmentation Period for Three Shift of

Sarthana SPS as per detailed specification

mentioned in tender

SCHEDULE-B3 OPERATION & MAINTENANCE WORK

DESCRIPTION QTY UNIT RATE TOTAL RATE

All in all Operation &Maintenance Cost

(Manpower, Fixed Cost, Machineries

Maintenance & Variable Cost) for

Normal Operational Period for Three

Shift of Sarthana SPS as per detailed

specification mentioned in tender

Painting work as instructed by

Engineer in Charge for Sarthana SPS as

per detail specifications & scope of

TOTAL RATE OF OPERATION & MAINTENANCE WORK 1,02,70,000/-

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation