Strengthening of Sewerage (P/L Internal Sewer Line Sector-49 Connect to Deep Sewer Line in STP Sector-50B), Noida.

Supply, Erection, Testing & Commissioning of Non Clog Sewage Submersible Pump Set complete in all respect as per direction of Engineer in Charge. Technical Specification of Pump Set shall be given below-

Motor Type- SQ. Cage Induction Motor 960 RPM suitable for operation on 400/440 volts, 3 phase, 50 Hz AC Supply with 'F' Class Insulation & IP-68 protection.

Pump- a) Body-Cast Iron with 2% Nickil b) Impeller-CF8M(SS316) c) Shaft-Stainless Steel d) Auto Coupling Stand-CF8M (SS316) e) Guide Pipe- Stainless Steel (SS304) @ 16 Mtr. f) Lifting Chain-alloy Steel @ 16 Mtr. G) Mechanical Seal-Upper Seal (Carbon/Crome Steel), Lower Seal (Silicon Carbide)

Field Requirement- a) Type-Non Clog Sewage Submersible Pump b) RPM- 960 c) Head- 28 Mtr. d) Copper Cable for Sewage Submersible Pump Suitable Size @ 25Mtr e) Specific Gravity of Sewage-1.07 f) Solid Handling Capacity (Dia)- Not less than 100 mm Note-Contractor shall be submitted G.T.P. & all compony test certificate of the material used in pupm set. (Make-Pullen Pump Industries Pvt. Ltd/A.s aqua Machineries Pvt. Ltd/M/s Kishor Pumps Pvt. Ltd.

Non Clog Sewage Submersible Pump Set Discharge 432 cum/hr, HEAD:-28Mtr, Rating 60/80, Outlet size of pipe 200mm dia, Cable 2 x 50 sqmm x 3.50 core + 1.50 sqmm x 4.0 core

PVC Flexible cables copper conductor 1100V conforming to 694/1990 double sheathed circular rate including excise duty, sales tax (Make- Tridev Electricals/uttam Engineering Works / Sweta Eclectricals)

35sqmm X 4 core

S/F of fully Automatic Control panel with 75 H.P. star delta starter for submersible/V.T. Pump sets with following features No-volt, Under-voltage, Over-voltage protection, Micloprocessor based overload protection, Unbalancing protection, Winding temperature controllrr. seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter, and indicating lamps. Above panel is dust and vermin proof made out of 14 SWG CRC sheet with powder coating paint as per directions ofE/1, (Make: single Contractor-L &T, MCCB-L&T, WTC-Minilec, phase prienter WLC/SM-Pumpcare C.T.-AE, Indicating Light & Push Button- L&T, Control Fuse-EE, Fuse Base-EE, Timer-L&T)

Hire charge of Generator (Including cost Service of operating staff, supply of lubricating oil and diesel also)

D G Set / Generator 100 KVA/125 KVA

Supply of Crane 20 tonne capacity at sitein hire basis including cost of diesel and driver etc. complete in all respect as per direction of E/I.

Supply & Fixing of Chain pulley 5 tonne capacity with height of lift. (Indef Make)

Supply & Fixing of Load Chain extra Chain Lift for 5 tonne Chain pulley

Excavating trenches of required width for pipes, cables etc. i/c excavation for sockets depth upto 1.5m i/c getting out the excavated materials, returning the soil as required in layers not exceeding 20cm. in depth i/c consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within lead of 50 m. The contractor has to detect different utilities like sewer line, water supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of E/I.

a) Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.

P/L following size of Finolex makes PVC pipes 10 Kg/Cm2 with required PVC standard special confirming to IS codes with latest amendment and lowering the same trenches and laying true to alignment and gradient complete I/c the cost of cutting of pipes for making upto length and making joints I/c cost of socket, plstochem PV-85 PVC solvent cement complete. PVC pipe must be confirming to IS : 4985-2000 with latest amendment Make-Finolex Industries Ltd. /Kisan/Supreme industries Ltd. (Rate As per Comparative Statement per Rm.)

a) 200 mm dia with coupler @ 10 Kg/Cm2 Pressure with i/c all PVC standard Specials

P/F M.S. specials such as Tee, bend, collars, Tapers, Gap pieces, including flange ends as required painting, Cutting, welding as per site requirement of MS pipe thickness etc.complete in all respect as per direction of E/I.

Supply, Erection, Testing & Commissioning of Non Clog Sewage Submersible Pump Set complete in all respect as per direction of Engineer in Charge. Technical Specification of Pump Set shall be given below-

Motor Type- SQ. Cage Induction Motor 960 RPM suitable for operation on 400/440 volts, 3 phase, 50 Hz AC Supply with 'F' Class Insulation & IP-68 protection.

Pump- a) Body-Cast Iron with 2% Nickil b) Impeller-CF8M(SS316) c) Shaft-Stainless Steel d) Auto Coupling Stand-CF8M (SS316) e) Guide Pipe- Stainless Steel (SS304) @ 16 Mtr. f) Lifting Chain-alloy Steel @ 16 Mtr. G) Mechanical Seal-Upper Seal (Carbon/Crome Steel), Lower Seal (Silicon Carbide)

Supply, Erection, Testing & Commissioning of Non Clog Sewage Submersible Pump Set complete in all respect as per direction of Engineer in Charge. Technical Specification of Pump Set shall be given below-

Motor Type- SQ. Cage Induction Motor 960 RPM suitable for operation on 400/440 volts, 3 phase, 50 Hz AC Supply with 'F' Class Insulation & IP-68 protection.

Pump- a) Body-Cast Iron with 2% Nickil b) Impeller-CF8M(SS316) c) Shaft-Stainless Steel d) Auto Coupling Stand-CF8M (SS316) e) Guide Pipe- Stainless Steel (SS304) @ 16 Mtr. f) Lifting Chain-alloy Steel @ 16 Mtr. G) Mechanical Seal-Upper Seal (Carbon/Crome Steel), Lower Seal (Silicon Carbide)

Field Requirement- a) Type-Non Clog Sewage Submersible Pump b) RPM- 960 c) Head- 28 Mtr. d) Copper Cable for Sewage Submersible Pump Suitable Size @ 25Mtr e) Specific Gravity of Sewage-1.07 f) Solid Handling Capacity (Dia)- Not less than 100 mm Note-Contractor shall be submitted G.T.P. & all compony test certificate of the material used in pupm set. (Make-Pullen Pump Industries Pvt. Ltd/A.s aqua Machineries Pvt. Ltd/M/s Kishor Pumps Pvt. Ltd.

Non Clog Sewage Submersible Pump Set Discharge 432 cum/hr, HEAD:-28Mtr, Rating 60/80, Outlet size of pipe 200mm dia, Cable 2 x 50 sqmm x 3.50 core + 1.50 sqmm x 4.0 core

PVC Flexible cables copper conductor 1100V conforming to 694/1990 double sheathed circular rate including excise duty, sales tax (Make- Tridev Electricals/uttam Engineering Works / Sweta Eclectricals)

35sqmm X 4 core

S/F of fully Automatic Control panel with 75 H.P. star delta starter for submersible/V.T. Pump sets with following features No-volt, Under-voltage, Over-voltage protection, Micloprocessor based overload protection, Unbalancing protection, Winding temperature controllrr. seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter, and indicating lamps. Above panel is dust and vermin proof made out of 14 SWG CRC sheet with powder coating paint as per directions ofE/1, (Make: single Contractor-L &T, MCCB-L&T, WTC-Minilec, phase prienter WLC/SM-Pumpcare C.T.-AE, Indicating Light & Push Button- L&T, Control Fuse-EE, Fuse Base-EE, Timer-L&T)

Hire charge of Generator (Including cost Service of operating staff, supply of lubricating oil and diesel also)

D G Set / Generator 100 KVA/125 KVA

Supply of Crane 20 tonne capacity at sitein hire basis including cost of diesel and driver etc. complete in all respect as per direction of E/I.

Supply & Fixing of Chain pulley 5 tonne capacity with height of lift. (Indef Make)

Supply & Fixing of Load Chain extra Chain Lift for 5 tonne Chain pulley

Excavating trenches of required width for pipes, cables etc. i/c excavation for sockets depth upto 1.5m i/c getting out the excavated materials, returning the soil as required in layers not exceeding 20cm. in depth i/c consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within lead of 50 m. The contractor has to detect different utilities like sewer line, water supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of E/I.

a) Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.

P/L following size of Finolex makes PVC pipes 10 Kg/Cm2 with required PVC standard special confirming to IS codes with latest amendment and lowering the same trenches and laying true to alignment and gradient complete I/c the cost of cutting of pipes for making upto length and making joints I/c cost of socket, plstochem PV-85 PVC solvent cement complete. PVC pipe must be confirming to IS : 4985-2000 with latest amendment Make-Finolex Industries Ltd. /Kisan/Supreme industries Ltd. (Rate As per Comparative Statement per Rm.)

a) 200 mm dia with coupler @ 10 Kg/Cm2 Pressure with i/c all PVC standard Specials

P/F M.S. specials such as Tee, bend, collars, Tapers, Gap pieces, including flange ends as required painting, Cutting, welding as per site requirement of MS pipe thickness etc.complete in all respect as per direction of E/I.

Supply, Erection, Testing & Commissioning of Non Clog Sewage Submersible Pump Set complete in all respect as per direction of Engineer in Charge. Technical Specification of Pump Set shall be given below-

Supply, Erection, Testing & Commissioning of Non Clog Sewage Submersible Pump Set complete in all respect as per direction of Engineer in Charge. Technical Specification of Pump Set shall be given below-

Motor Type- SQ. Cage Induction Motor 960 RPM suitable for operation on 400/440 volts, 3 phase, 50 Hz AC Supply with 'F' Class Insulation & IP-68 protection.

Pump- a) Body-Cast Iron with 2% Nickil b) Impeller-CF8M(SS316) c) Shaft-Stainless Steel d) Auto Coupling Stand-CF8M (SS316) e) Guide Pipe- Stainless Steel (SS304) @ 16 Mtr. f) Lifting Chain-alloy Steel @ 16 Mtr. G) Mechanical Seal-Upper Seal (Carbon/Crome Steel), Lower Seal (Silicon Carbide)

Field Requirement- a) Type-Non Clog Sewage Submersible Pump b) RPM- 960 c) Head- 28 Mtr. d) Copper Cable for Sewage Submersible Pump Suitable Size @ 25Mtr e) Specific Gravity of Sewage-1.07 f) Solid Handling Capacity (Dia)- Not less than 100 mm Note-Contractor shall be submitted G.T.P. & all compony test certificate of the material used in pupm set. (Make-Pullen Pump Industries Pvt. Ltd/A.s aqua Machineries Pvt. Ltd/M/s Kishor Pumps Pvt. Ltd.

Non Clog Sewage Submersible Pump Set Discharge 432 cum/hr, HEAD:-28Mtr, Rating 60/80, Outlet size of pipe 200mm dia, Cable 2 x 50 sqmm x 3.50 core + 1.50 sqmm x 4.0 core

PVC Flexible cables copper conductor 1100V conforming to 694/1990 double sheathed circular rate including excise duty, sales tax (Make- Tridev Electricals/uttam Engineering Works / Sweta Eclectricals)

35sqmm X 4 core

S/F of fully Automatic Control panel with 75 H.P. star delta starter for submersible/V.T. Pump sets with following features No-volt, Under-voltage, Over-voltage protection, Micloprocessor based overload protection, Unbalancing protection, Winding temperature controllrr. seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter, and indicating lamps. Above panel is dust and vermin proof made out of 14 SWG CRC sheet with powder coating paint as per directions ofE/1, (Make: single Contractor-L &T, MCCB-L&T, WTC-Minilec, phase prienter WLC/SM-Pumpcare C.T.-AE, Indicating Light & Push Button- L&T, Control Fuse-EE, Fuse Base-EE, Timer-L&T)

CAPABILITY STATEMENT

* It is compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

Tender Reference No : 36/S.M.-(Jal)-III/2025-26

Tender : Strengthening of Sewerage (P/L Internal Sewer Line Sector-49 Connect to Deep Sewer Line in STP Sector-50B), Noida.

Name of Tenderer

TOTAL NIT COST OF PROJECT (In Rs.)

Minimum Value

SOLVENCY (Issued within a period of minimum six months).

EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited

NOT QUALIFIED

NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender

NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender

RESULT OF EXPERIENCE

TURNOVER (During the immediate LAST 3 consecutive financial years)

Average Annual Financial Turnover on construction works should be atleast 30% of the estimate cost during the immediate Last 3 consecutive financial years.

Required Technical Staff

Required Machinary

Contractor certificate of Individual/ partners/ directors issued by District Megistrate

Affidavit of not blacklisted.

Address Proof/Id. Proof of individual/ partners/ directors.

Latest income tax clearance certificate.

Filled in form Capability Statement.

Salf declaration affidavit on Rs. 100/- Notarised Stamp paper

No Blood Relation declaration affidavit on Rs. 100/- Notarised Stamp paper

Certified Copies of relevant pages of following ducuments.