Electrification of sampling shed at CSIR CIMFR Bilaspur Unit

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet (01 Module)

Internet socket outlet (01 Module)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ ecessed Steel/ PVC conduit as required.

2 run of cable

3 run of cable

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

100 mm X 100 mm X 60 mm deep

200 mm X 1500 mm X 60 mm deep

250 mm X 300 mm X 60 mm deep

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

6 Module (200mmX75mm)

12 Module (200mmX150mm)

Supply and fixing of following modular switch/socket, on existing modular plate and switch box including connections etc as required for A/C.

10/25 Amp Shuttered socket

25A motor starter

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

125 A,36KA,FPMCCB

250 A,36KA,FPMCCB

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way (4 + 18), Double door

4 way (4 + 12), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing following rating, four pole, 415 V, MCB, 15 kA, "C" curve, in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and fixing 16 way vertical 125A VTPN MCCB DB cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing 16 way vertical 250 A VTPN MCCB DB cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent/lLED recess light/surface light/street light/wall fan fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

Above 35 sq. mm and upto 95 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 35 sq. mm and upto 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable on wall

Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 70 sq. mm (38mm)

2 X 6 sq. mm (19mm)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

125 A,36KA,FPMCCB

250 A,36KA,FPMCCB

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supply of following size, 3.5 core 1.1 KV grade PVC/XLPE aluminuim armoured cable etc as required

3.5 core x 95 Sq mm

4 core x 6 sq mm

4 core x 4 sq mm

Supply of 18 watt, 6000 K, slim LED recesses fitting for false ceiling

Supply of 18 watt, 6000 K round/square surface fitting for surface mounting

Supply of high bay light 90/100 watt, efficiancy minimum 100 Lm/watt

Supply of 70/72 watt LED street light, efficiancy minimum 110 Lm/watt

Supply of 1200 mm sweep ceiling fan, high speed.

Supply of 400 mm High speed wall fan, 3/4 blades, with pull string control mechnism

Supply of 450 mm sweep exhaust fan metal body with external metal louvers.

Supply and Fixing of Polycarbonate Cable Junction box of size 104 x 104 x 70 mm with IP 66 protection, with integrated metric knockouts for incommer and outgoing cable of size upto 4 sq. mm. on surface, arrangement for fixing of SP MCB in box etc as required.

Supply and fixing of Direct On-line (DOL) starter suitable for three phase motor upto 12.5 HP, 415 V, 50 Hz on surface including connections as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required

Supply and fixing of 20 to 32 amp, 10 kA, C curve, four pole MCB in four way single door MCB DB in surface/recess as required.

Supply and fixing of 5 to 32 amp, 10 KA, C curve, double pole MCB in two way single door MCB DB in surface/recess as required.

Design, Fabrication, installing and commissioning of indoor typ double door TPN distribution panel cum Bus bar chamber (16 SWG steel Sheet) with 04 (four) number of 900 amp aluminium busbar . In addition to above the following swithces/MCB/MCCB with spreader link and suitable connection with busbar with suitable digital 3 phase VAF meter and Indicating lights ets. Suitable arrangement for cable entry for input and output & suitable pin type panel lock, complete in all respect complete in all respect as required. (Detailed design and drawing of above distribution panel should be furnished by contractor for approval of HOS, Electrical Maintenance Section, BC, before starting the panel work) acessories should be ISI marked.

630 Amp, 4 Pole, 36 KA MCCB - 01 no.

250 Amp, 4 Pole, 36 KA MCCB - 01 no.

100 Amp, 4 Pole, 25 KA MCCB - 03 no.

63 Amp 4 Pole, 10 KA, MCCB - 04 nos

32 Amp 4 Pole, 10 KA, MCCB - 02 nos

ASHISH KLUMAR AGRAWAL

shreelaxmiconstructionandco

Sawalakhe Industries

The Suburban Electric Co.