Construction of Health Sub Centre building at Khabbal (Nagrota Surian Block) in Tehsil Jawali District Kangra (HP)

Amount

Excavation in foundation trenches etcetera in earth work in all type of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the excavated soil clear from the edge of excavation within all leads and lifts as directed by Engineer-in- charge and then returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus unserviceable excavated earth as directed by the Engineer-in-Charge, within all leads, and lifts disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts. The rate includes octroi, sale tax, malkana and all other taxes as imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper blasting work, hard blasting work including chiseling or wedging out rocks where blasting is prohibited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth upto any leads and lifts, disposed earth to be levelled and neatly dressed as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate includes octroi, royality, sale tax, malkana and all other taxes as imposed by the Government.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and filling brick bats/crushed stone aggregate 40mm (Forty millimetres) nominal size) in soak pit complete as per directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/depths, heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Foundation footings, bases of columns etc. and mass concrete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/depths, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Flat surfaces such as soffits of suspended floors, roofs landings shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetres) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/depths, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in Columns, Pillars, posts and struts, (Square rectangular or polygonal in plan) in any heights/thickness/depths upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetres) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/depths, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like, upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetres) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/ depths, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landings upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all heights/ depths, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Beams, cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels upto any heights/ depths/ thickness upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetres) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/ depths, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Edges of slabs and breaks in floors and walls upto any width, upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:6:12 (One cement is to six sand : is to twelve graded crushed/ broken stone aggregate 40mm (Forty millimetres) nominal size) and curing complete excluding cost of form work in foundation and plinth in all depths, including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specification or as directed by the Engineer-in-Charge, and carriage of materials within all leads, lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax or all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded crushed/broken stone aggregate 40mm (Forty millimetres) nominal size mixed mechanically and curing complete excluding the cost of form work in foundation and plinth in all depths, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax or all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:1½:3 (One cement : one and half sand : three graded crushed/ broken stone aggregate 20mm (Twenty millimetres) nominal size) mix designed to obtain the minimum compressive strength of grade M-25 (M-Twenty five) including curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings basis of columns etcetera and the like and mass concrete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate including of malkana, royality, octroi, toll tax or all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:1½:3 (One cement : one and half sand : three graded crushed/ broken stone aggregate 20mm (Twenty millimetres) nominal size) mix designed to obtain the minimum compressive strength of grade M-25 (M-Twenty five) including curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/thickness upto all floor levels as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate including of malkana, royality, octroi, toll tax or all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:1½:3 (One cement : one and half sand : three graded crushed/ broken stone aggregate 20mm (Twenty millimetres) nominal size) mix designed to obtain the minimum compressive strength of grade M-25 (M-Twenty five) including curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness upto all floor levels as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate including of malkana, royality, octroi, toll tax or all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:1½:3 (One cement : one and half sand : three graded crushed/ broken stone aggregate 20mm (Twenty millimetres) nominal size) mix designed to obtain the minimum compressive strength of grade M-25 (M-Twenty five) including curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing upto all floor levels as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate including of malkana, royality, octroi, toll tax or all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimetres) nominal size) mix designed to obtain the minimum compressive strength of grade M-20 (M-twenty) and curing complete, excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimetres) nominal size) mix designed to obtain the minimum compressive strength of grade M-20 (M-twenty) and curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in Foundation, footing, bases of columns and the like and mass concrete including pumping or bailing out water and removal of slush if any and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) mix designed, to obtain the minimum compressive strength of Grade M-20 (M-Twenty) including curing complete as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/thickness upto all floor level, including carriage of materials within all leads and lifts and other incidentals. The rate includes of malkana, royality, octroi, toll tax or all other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregate 20mm (Twenty millimetres) nominal size) mix designed, to obtain the minimum compressive strength of Grade M-20 (M-Twenty) including curing complete as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in walls (any thickness) but not less than 0.10metre (zero point one zero metres) thickness including attached, pilasters, buttresses plinth and string courses etcetera from top of foundation upto all floor level, including carriage of materials within all leads and lifts and other incidentals. The rate includes of malkana, royality, octroi, toll tax or all other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregate 20mm (Twenty millimetres) nominal size) mix designed to obtain the minimum compressive strength of grade M-20 (M-Twenty) for reinforced concrete chajjas of any thickness upto all heights/ floor level including finishing the exposed surfaces with cement mortar 1:3 (One cement isto three sand) to give smooth and even surfaces including centring/ form work and curing complete, excluding cost of reinforcement including carriage of materials within all leads and lifts and other incidental charges. The rate includes royality charges such as octroi, toll tax or all other taxes imposed by the Government.

Providing and laying Mild steel/ tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all heights including cost of binding wires complete and other incidental due for its completion including carriage of mterials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing in reinforced cement concrete work smooth finishing of the exposed surfaces with cement mortar 1:3 (one cement : three sand) including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Random rubble masonry/polygonal rubble masonry uncoursed/ brought to courses with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve graded stone aggregate 20mm (Twenty millimetres) nominal size) at plinth level in cement mortar 1:6 (One cement : six sand) and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth upto all heights/ depths including pumping or bailing out water/dewatering and including racking out joints in cement mortar 1:5 (One cement : five sand) and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in mud mortar including curing complete, and carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Boulder filling tightly hand packed with hard stone under floor including watering, ramming, consolidation and dressing complete and carriage of materials within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying pre-cast cement concrete hollow block masonry in wall with cement concrete blocks of size 40cmx19cmx20cm (Forty centimeters into nineteen centimeters into twenty centimeters) including quoin block jamb block and closers, etcetera made of cement concrete 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (Twenty millimetres) nominal size) laid with cement mortar 1:6 (One cement : six sand) including curing complete in super structure upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying pre-cast cement concrete block masonry in partition walls 10cm (Ten centimeters) thick with solid block of approved size including quoin blocks, jamb blocks and closers etcetera made of cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 40mm (Forty millimetres) nominal size and down gauge) in cement mortar 1:6 (one cement : six sand) in super structure above plinth level upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Factory made ISI marked No.IS:1003 40mm (Forty millimetres) thick flush door shutters interior grade, commercial type core of block board construction with frame of First class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters including black enamelled M.S. butt hinges complete including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 19mm (Nineteen millimetres) thick commercial board water proof shutter for cup boards including fixing with nickle plated bright finished piano hinges with necessary screws etcetera complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing cabinet work made of 19mm (Ninteen millimetres) thick water proof termite resistant commercial board including vertical partitions shelves and shutters, frame of First class hard wood and hard wood edging/ lipping 6mm (Six millimetres) thick complete including top finished with 1.00mm (one point zero zero milimetres) thick MICA lamination sheet of approved shade and 6mm (Six milimetres) thick commercial ply back side complete including Nickel plated piano hinges and 65x35mm (Sixty five into thirty five millimetres) brass cup board lock complete as per design/ Architectural drawings as per HP:PWD. Specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals. The rate includes of royality charges , octroi, sale tax or all other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetres) thick second class Deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including bright finished black enamelled iron butt hinges with necessary screws etc, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 40mm (Forty millimetres) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G (eighty five galvanized) with wire of diameter 0.56mm (Zero decimal five six millimetres) for doors, windows and clerestory windows including bright finished black enamelled iron butt hinges with necessary screws, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 300x16mm (Three hundred into sixteen millimetres) anodized aluminium sliding door bolts anodized Transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetres) anodized aluminium sliding door bolts anodized Transparent or dyed to required colour and shade with bolts and nuts, necessary screws etc. complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 250x10mm (Two hundred fifty into ten millimetres) size anodized aluminium Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm x 10mm (One hundred millimetres into ten millimetres) Size anodized aluminium Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 65x35mm (Sixty five into thirty five millimetres) special quality bright finished brass cup board locks or wardrobe locks of approved make with six levers including necessary screws etcetera complete and carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) bright finished brass floor door stopper with rubber cushion and necessary screws etcetera to suit shutter thickness complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) oxidized M.S. double acting spring hinges with necessary screws etc. complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 200mm (Two hundred millimetres) size oxidized mild steel hooks and eyes with necessary screws complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing oxidized M.S. fan light catch with necessary screws etcetera complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government

Providing and fixing 8mm (eight millimetres) thick cement bonded partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 12mm (Twelve millimetres) thick and 150mm (One hundred fifty millimetres) wide First class deodar wood pelmet with 25mm (Twenty five millimetres) diameter wooden curtain rods and brackets including fixing 25x3mm (Twenty five into three millimetres) M.S. flat 10cm (Ten centimeters) long and plugs etcetera complete including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government

Providing and fixing M.S. (Mild steel) plain grills of required pattern in wooden/ angle iron/ steel frames of windows etcetera with M.S. flats square or round bars bolt and nuts or screws including welding with frames complete in all respect including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying automatic hydraulically compressed and polished precast terrazzo tiles of ISI marked No.IS-1237 of approved shade 20mm (Twenty millimetres) thick with marble chips of specified sizes laid in floors, treads of steps and landing on a bed of 25mm (Twenty five millimetres) average thickness of cement mortar 1:6 (One cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with the tiles of medium shade upto all floors level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying automatic hydraulically compressed and polished precast terrazzo tiles of ISI marked No.IS-1237of approved shade 20mm (Twenty millimetres) thick with marble chips of specified sizes in skirting and risers of steps and dado upto any heights on 10mm (Ten millimetres) average thickness of cement plaster 1:3 (one cement : three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of medium shade complete in all respect upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying White glazed tiles 6mm (Six millimetres) thick in skirting risers of steps and dado for all heights on 12mm (Twelve millimetres) thick cement plaster 1:3 (one cement : three sand) and jointed with white cement slurry complete upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

40mm (Forty millimetres) thick cement concrete flooring 1:2:4 (One cement : two sand : four graded/ crushed stone aggregate 20mm (Twenty millimetres) nominal size) mechanically mixed laid in one layer and finished with a floating coat of neat cement and curing complete upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen millimetres) thick cement plaster skirting or dado (upto any heights) with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement including rounding of junctions with floor and curing complete, upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 20mm (Twenty millimetres) thick white makrana marble work (table rubbed and polished) in flooring laid over 20mm (Twenty millimetres) thick base in cement mortar 1:3 (One cement : three sand) including jointing with cement mortar 1:2 (One white cement : two marble dust) with an admixture of pigment to match the shade of the marble complete upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 0.60mm (Zero point six zero millimetres) thick prepainted steel sheet in roofing over steel trusses with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetres) diameter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ridges or hips 60cm (sixty centimeters) over all with 0.60mm (zero point six zero millimetres) thick prepainted steel sheets in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six milimetres) diameter with prepainted galvanized iron limpet and bitumen washers complete with all accessories as required as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing valleys 60cm ((sixty centimeters) over all with 0.60mm (zero point six zero millimetres) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) micron primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, Bolts and nuts 6mm (six millimetres) diameter with prepainted galvanized iron limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 0.63mm (Zero point six three millimetres) thick plain galvanised iron sheet 15cm (Fifteen centimeters) wide 45cm (Forty five centimeters) deep overall semicircular plain G.I. (Galvanised Iron)sheet gutter with iron brackets 40x3mm (Forty into three millimetres) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe complete as per design and drawing, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face PVC (polyvinyl chloride) D-plast or equivalent accessories for rain water pipes including filling the joints with approved adhesive complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government. (i) P.V.C. plain bend 100mm (one hundred millimeters) diameter

Providing and fixing on wall face PVC (polyvinyl chloride) D-plast or equivalent accessories for rain water pipes including filling the joints with approved adhesive complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government. (i) P.V.C. plain Shoe 100mm (one hundred millimetres) diameter.

Providing and fixing on wall face 100mm (One hundred milimetres) diameter P.V.C. (polyvinyl chloride) D-plast or equivalent rain water pipes of working pressure not less than 4.50 kg (Four point five zero kilogrammes) per Square Metre including filling the joints with approved adhesive complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing M,S.(Mild steel) B.P (black plain) sheet 1.66mm to 2mm (one point six six millimetres to two millimetres) thick in eaves board/facia /soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured and paid separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Steel work welded in built up sections, trusses and framed work composed of beam, joists, channels, angles, tees flat and connectingplates or angle cleets etc. as in trusses and trussed purlins, main and cross beam hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete, In gratings, framed guard, bars, ladders, railing brackets and the like ceiling frames etcetera including carriage of materials within all leads and lifts and other incidentals. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Steel work welded in built up sections, trusses and framed work composed of beam, joists, channels, angles, tees flat with connecting plates or angle cleats etcetera as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete, In trusses and trussed purlins in building including carriage of materials within all leads and lifts and other incidentals. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing M.S.(Mild steel) round holding down or anchor bolts with nuts and washers plates complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing double steel shutter windows side hung (one glazed and other wire gauged) including frame of channels ISLC-75 (Seventy five) flapped with mild steel flat 75x4mm (Seventy five into four millimetres) and 50x4mm (Fifty into four millimetres) in the opening side of channels to make multi frame and shutter of rolling steel Z-section and T-section and T-hinges, Handles with closing device and making provision of fixing of window (where required) with 16x3.15mm (Sixteen into three point one five millimetres) lugs 10cm (Ten centimetres) long embedded in cement concrete block 15cmx10cmx10cm (fifteen centimeters into ten centimeters into ten centimeters) size of 1:3:6 (One cement : three sand : six graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings including providing and fixing 4mm (four millimetres) thick glass panes with glazing clips and special metal sesh putty of approved make for glazed shutter and metal beading with screws etcetera and including fixing of wire gauge shutter using galvanised M.S. wire gauge of IS gauge designation 85-G (Eighty five-G) with wire of diameter 0.56mm (Zero point five six millimetres) and for fixing wire mesh with M.S. flats 20mmx3mm (Twenty millimetres into three millimetres) for beading and screws and applying a priming coat of approved steel primer after pretreatment of the surfaces as directed by Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimeters) lugs 10cm (Ten centimeters) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimeters) size of 1:3:6 (One cement is to three sand is to six graded stone aggregate 20mm (Twenty millimetres) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etc. including providing and fixing of glass panes 4mm (Four millimetres) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints and carriage of materials within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government. (a) Fixed steel window.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimeters) lugs 10cm (Ten centimeters) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimeters) size of 1:3:6 (One cement is to three sand is to six graded stone aggregate 20mm (Twenty millimeters) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etc. including providing and fixing of glass panes 4mm (Four millimetres) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints and carriage of materials within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government. (a) Top Hung Ventilator

Providing and fixing angle iron cupboard frames manufactured from M.S. angle iron section 25x25x5mm (Twenty five into twenty five into five millimetres) thickness including hinges, jamb, lock jamb, beed and if required angle thrashold of mild steel angle 25x25mm (Twenty five into twenty five millimetres) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two point five millimetres) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing MS (mild steel) fan clamps type-I of 16mm (Sixteen millimetres) diameter M.S. bars bent to shape with hooked ends in RCC slabs during laying including painting the exposed portion of loop all as per standard design complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing angle iron doors, windows clerestory windows frame (single rebate) manufactured from M.S. angle iron section of 40x40x6mm (Forty into forty into six millimetres) thickness and M.S. flat 50x5 (fifty into five millimetres) as per design and drawing including hinges, jambs lock, jambs beeds and if required angles thrashold of M.S. angle 50x25mm (Fifty into twenty five millimetres) welded or rigidly fixed by mechanically means lugs with split ends tails to each jambs including steel butt hinges 2.5mm (two point five millimeters) thick with a provision for locking arrangements and shock observer as specified and applying coat of approved steel primer after pre-treatment of the surfaces complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing angle iron doors, windows clerestory windows frame (double rebate) manufactured from M.S. angle iron section 40x40x6mm (Forty into forty into six millimetres) and M.S. flat 50x6mm (fifty into six millimetres) and M.S. flat 25x6mm (Twenty five into six millimetres) combined together to make one frame as per design and drawing including hinges, jambs lock, jambs beeds and if required angles threshold of M.S. angle 50x25mm (Fifty into twenty five millimetres) welded or rigidly fixed by mechanically means lugs with split ends tails to each jambs including steel butt hinges 2.5mm (two point five millimetres) thick with a provision for locking arrangements and shock observer as specified and applying coat of approved steel primer after pre-treatment of the surfaces as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing railing for stair case having balusters 19x19mm (nineteen into nineteen millimetres) solid square bar with a clear height of 85cm (eighty five centimeters) and 60cm (sixty centimeters) centre to centre embedded in cement concrete steps and welded with electric gas at top alongwith hand rail of hollow mild steel rectangular pipe 60x40mm (sixty into forty millimetres) (ISG-16) (ISG-sixteen) vertical baluster welded or jointed with each other with two rows of mild steel flat 50x5mm (fifty into five millimetres) as per HP:PWD specifications or as directed by the Engineer-in-Charge, including applying a priming coat with steel primer and carriage of materials within all leads and lifts and other incidentals. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Applying priming coat over new steel and other metal surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes/ fine steel wool scrappers and sand papered complete with ready mixed priming paint brushing red lead red oxide/ zinc oxide chrome complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surface under coat with readymixed other than white of approved brand brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint of approved brand and manufacture of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete with ready mixed paint other than white and carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Applying priming coat on new concrete/ masonry/ asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer of approved brand complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final finish to the surface complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Wall painting (two or more coats) with acrylic emulsion paint of approved brand and manufacture of approved shade for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

6mm (Six millimetres) thick cement plaster to ceiling with cement mortar 1:3 (One cement : three sand) upto all floors level and curing complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen millimetres) thick cement plaster with cement mortar 1:6 (One cement : six sand) in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level, including arrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen millimetres) thick cement plaster with cement mortar 1:6 (One cement : six sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen millimetres) thick cement plaster with cement mortar 1:3 (One cement : three sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

White washing with lime on undecorated wall/ ceiling and/or sloping roof (two or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drops and other foreign matter, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two or more coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt,dust and other foreign matter etcetera including sand paper smooth complete and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces ( two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials other foreign matter and sand papered smooth including carriage of materials complete, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing under layer for plinth protection of 75mm (Seventy five millimeters) thick (un-consolidated) bed of dry brick/ stone aggregate 40mm (Forty millimetres) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing plinth protection 50mm (Fifty millimetres) thick cement concrete 1:3:6 (One cement is to three sand is to six graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) including finishing the top surfaces of concrete smooth and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Constructing Course rubble hammer dressed ‘U’ shape open surface drain with side wall 15x22cm (Fifteen into twenty two centimeters) in cement mortar 1:6 (One cement : Six sand) and inside plastering with cement mortar 1:3 (One cement : three sand) including earth work and laying 10cm (Ten centimeters) cement concrete in 1:5:10 (One cement : five sand: ten graded stone aggregate 40mm (Forty millimetres) nominal size) and 7.5cm (Seven point five centimeters) cement concrete 1:2:4 (One cement : Two sand : four graded stone aggregate 20mm (Twenty millimetres) nominal size and finished with a floating coat of neat cement complete as per standard design, and drawing and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying in trenches ISI marked 20mm (twenty millimetres) nominal bore galvanized mild steel tubes (Medium Grade) tube fittings (earth work in trenches to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 20mm (Twenty millimetres) nominal bore galvanised mild steel tube (medium grade) tube fittings and clamps including making good the wall, ceiling and floor in all heights/ floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 15mm (Fifteen millimetres) nominal bore galvanized mild steel tube (medium grade) tube fitting and clamps including making good the wall, ceiling and floor in all heights/ floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing P.V.C. (D-plast or equivalent) ISI marked plain bend 100mm(one hundred millimetres) nominal diameter, including fixing with approved adhesive complete, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing P.V.C. (D-plast or equivalent) ISI marked tees 100mm(one hundred millimetres) nominal diameter, including fixing with approved adhesive complete, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) nominal diametre sand cast iron/ cast iron spun spigot and socket soil waste and ventilating pipes (lead caulked joints to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five millimetres) nominal diametre sand cast iron/ cast iron spun spigot and socket soil waste and ventilating pipes (lead caulked joints to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) diametre cast iron holder bats including steel bolts to PVC/ sand cast iron/cast (spun) iron pipes embedded in and including cement concrete blocks 100mmx100mm x100mm (one hundred millimetres into one hundred millimetres into one hundred millimetres) of 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetres) nominal size) including cost of cutting hole and making good the walls, and carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five millimetres) diametre cast iron holder bats including steel bolts to P.V.C./ sand cast iron/cast (spun) iron pipes embedded in and including cement concrete blocks 100mmx100mmx100mm (one hundred millimetres into one hundred millimetres into one hundred millimetres) of 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetres) nominal size including cost of cutting holes and making good the walls, and carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing sand cast iron/ cast iron spun fitting and accessories (a) bends of required degree (any radius) complete including carriage of materials within all leads, lifts and other incidental charges. The rate includes royality charges, octroi, toll taxs, sale tax and all other taxes imposed by the Government. (a)Plain bend 100mm (one hundred millimeters) nominal size.

Providing and fixing sand cast iron/ cast iron spun fitting and accessories (a) bends of required degree (any radius) with oval access door insertion rubber washer 2mm (two milimetres) thick bolts and nuts complete including carriage of materials within all leads, lifts and other incidental charges. The rate includes royality charges, octroi, toll taxs, sale tax and all other taxes imposed by the Government.75mm (seventy five millimeters) nominal size.

Providing and fixing sand cast iron/ cast iron spun fitting and accessories (a) bends of required degree (any radius) plain complete including carriage of materials within all leads, lifts and other incidental charges. The rate includes toll tax, sale tax and all other taxes imposed by the Government. (a) Plain bend 75mm (seventy five millimetres) nominal size

Providing and fixing cast iron cowl 100mm (one hundred millimetres) nominal diameter, including carriage of materials within all leads, lifts and other incidental charges. The rate includes royality charges, octroi, toll taxs, sale tax and all other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) nominal size/ diameter M.S. stay and clamps for sand cast iron/ cast (spun) iron pipes, including carriage of materials within all leads, lifts and other incidental charges. The rate includes royality charges, octroi, toll taxs, sale tax and all other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimetres) nominal diameter cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting holes and making good the walls and floor, including carriage of materials within all leads, lifts and other incidental charges. The rate includes royality charges, octroi, toll taxs, sale tax and all other taxes imposed by the Government.

Providing and fixing Hind ware/ Cera make or its equivalent Orrissa pattern vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (Five hundred eighty millimetres) (earth work, bed concrete, foot rest and trap to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental charges. The rate includes royality charges, octroi, toll taxs, sale tax and all other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) size sand cast iron P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortor 1:1 (one cement : one sand) complete, including carriage of materials within all leads, lifts and other incidental charges. The rate includes royality charges, octroi, toll taxs, sale tax and all other taxes imposed by the Government.

Providing and fixing PTMT coloured/white high density polythelene/ poly propylene 10 litres (Ten litres) capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, less syphon, 15mm (fifteen millimetres) nominal size PVC ball valve with polythene float, with push button couplings for connections with inlet outlet and over flow pipe , 40mm (forty millimetres) diameter C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental charges. The rate includes royality charges, octroi, toll taxs, sale tax and all other taxes imposed by the Government.

Providing and fixing flat back 630x450mm (six hundred thirty into four hundred fifty milimetres) vitreous china wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fitting, including carriage of materials within all leads, lifts and other incidental charges. The rate includes royality charges, octroi, toll taxs, sale tax and all other taxes imposed by the Government.

Providing and fixing stainless steel wash basin 550x400mm (five hundred fifty into four hundred millimetres) diamond model code No.WB-2116 complete with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same and carriage of materials within all leads and lifts. The rate includes royality charges, octroi, toll taxs, sale tax and all other taxes imposed by the Government.

Providing and fixing ISI marked stainless steel kitchen sink 610x460mm (six hundred ten into four hundred sixty millimetres) with bowl depth 200mm (two hundred millimeters) diamond model code No. WB-2116 with drain board and C.P. waste with C.I. or mild steel brackets painted white including cutting holes and making good the walls but excluding fittings complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (thirty two millimetres) diameter C.P. brass waste for wash basin or sink, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) size sand cast iron grating for gully floor or Nahni trap, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600mmx450mm (six hundred millimetres into four hundred fifty millimetres) bevelled edge mirror of superior glass mounted on 6mm (six millimetres) thick A.C. (asbestos cement) sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600x20mm (six hundred into twenty millimetres) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws, complete, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) diameter C.P. brass shower rose with 15mm (Fifteen milimetres) or 20mm (Twenty milimetres) inlet, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing C.P. brass bib tap with capstan head 15mm (Fifteen millimetres) diameter complete including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen millimetres) diameters C.P. brass (Heavy duty makes ISI marked No. 8931 and 8934) pillar tap with capstan head complete, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing brass stop cocks 15mm (fifteen millimetres) diameter complete, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PVC connection pipe with brass union 45cm (forty five centimeters) long and 15mm (fifteen millimetres) nominal bore complete, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing P.V.C. water storage tank of (ISI 12701 marked (triple layer) 1000 litres (One thousand litres) capacity with G.I. inlet and outlet connection with fittings 15mm (fifteen millimetres) nominal bore ball valve with polythene float and mosquito proof PVC cover with locking arrangement including hoisting upto any height, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Constructing manhole with R.C.C. top slab in cement concrete 1:2:4 (One cement : two sand :four graded/ crushed stone aggregate 20mm (Twenty millimetres) nominal size) mix, foundation concrete 1:4:8 (One cement : four sand :eight graded/crushed stone aggregate 40mm (Forty millimetres) nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One cement three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) finished smooth complete including curing and testing (a) inside size 800x800mm (eight hundred into eight hundred millimetres) and upto any depths including C.I. cover with frame (light duty single seal pattern-1) 455x610mm (Four hundred fifty five into six hundred ten millimetres) internal diamensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogrammes) (weight of cover 23kg (Twenty three kilogrammes) and weight of frame 15 kg (Fifteen kilogrammes) (i) with 200mm (Two hundred millimetres) thick wall of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement : three sand), including carriage of materials within all leads and lifts, and other incidental charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.