Expansion joint treatment for the aqueduct at ch 8.24 km and improvements to canal embankment of HLBC, Removal of slipped earth in deepcut reaches at ch 2km to ch 3km and raising of embankment and raising of canal embankment in vulnarable reaches of dy 2 and Dy 3 of PLIC and repairs to damaged canal embankment at ch 6.5km,8.5km and 21.50 km of PLIC main canal and improvements to canal by providing box drain in Ch1.0 km to 1.2km of d3 of PLIC and improvements and repairs to Konanuru and hanagal

Expansion joint treatment for the aqueduct at ch 8.24 km and improvements to canal embankment of HLBC, Removal of slipped earth in deepcut reaches at ch 2km to ch 3km and raising of embankment and raising of canal embankment in vulnarable reaches of dy 2 and Dy 3 of PLIC and repairs to damaged canal embankment at ch 6.5km,8.5km and 21.50 km of PLIC main canal and improvements to canal by providing box drain in Ch1.0 km to 1.2km of d3 of PLIC and improvements and repairs to Konanuru and hanagal

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete same as directed etc., complete with all lead and all lifts as the direction...

Cutting of Trees, excluding removal of stumps and roots of trees - (i) Girth from 300 mm to 600 mm complete with all lead and all lifts as the direction of Engineer Incharge

Excavation and removal of silt and silt mixed with sand in slussy condition from canal bed including disposing off the same in spoil bank or on the canal embankment in layers as directed etc., complet...

De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machin...

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out...

Crack Groove Cutting: Groove shall be cut using hand held electrically operated concrete cutting machine of size of 50 mm wide and 75 mm deep on each side of the crack to form as "V" groove all along ...

Surface Preparation of Bridge for maintenance: Crack surface shall be cleaned using underwater jet to remove the fungal growth and other foreign materials to enable a clean and visible surface. The it...

Crack Sealing/Filling using epoxy mortar: Base and hardener of the high strength repair mortar . Epoxy putty shall be mixed using the slow speed heavy duty mixing machine to obtain a uniform mix. The ...

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed dr...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Removing and hauling all kinds of soil / soft rock including boulders upto 0.6 m diameter slipped due to natural causes and disposing off the same in specified dump area or as directed by manual means...

Providing casing embankment for breached / damaged portion of canal using approved pervious /semi-pervious soil in layers of 100 to 150 mm ( before compaction ) including cost of all materials, machin...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Providing new embankment abutting to existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250 mm and compacting each layer to density control of not les...

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other an...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Substructure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. Th...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Cutting of trees, excluding removal of stumps and roots of trees - (i) Girth from 300 mm to 600 mm complete with all lead and all lifts as the direction of Engineer Incharge

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete with ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...