SPECIAL REPAIR TO BUILDING NO P 123 SINGLE JCO S LIVING OF SATA BTY AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Taking down choukhats or frame with shutter ( with out taking off shutter from the frame exc 1.5Sqm but n.exc 4 Sqm all as specified and directed

Taking down and refixing of same opening of shutter exc 1.00Sqm n.exc 2.00 Sqm and all as specified and directed.

Taking down and refixing in same opening of shutters of any description but Exc 1.50 Sqm and N.Exc 2 Sqm each

S&F steel windows with side hung shutters including box type hinges with one No MS handle per leaf made of FI 25 x 3 mm made to shape Appx 200 mm in length and two Nos 150mm long MS tower bolt welded to each shutter including 150 mm long peg stay, complete with glazing bars, dovetailed or welded all as specified.

ditto--- but without glazing bars complete

Supply and fix framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted or forged into spikes ; framed guards bars ; barred iron doors, ladders, framed balusters, walk ways, railings framed work of water and similar work conforming to Fe-410-0 or Fe-310-0 using 12mm square bar complete all as specified and as directed.

S&F for galvanised mild steel wire cloth of 0.56mm nominal dia wire average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples or wooden beads for fixing to wooden shutters complete all as specified and directed.

S&F for sheet glass 3mm thick ordinary quality and fixed steel or wooden frame with putty or wooden beads, N.Exc 0.5Sqm each pane complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet 10mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per sample kept with GE's Office.

S/F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.

S&F Anodised aluminium ventilator lover type (Minimum 115micron anodising) including 4mm thick plan sheet aluminium section as per designation 63400 of is 737 complete as approved by Engr-in-charge

S & F 35mm thick IInd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc all as specified in SSR Part-I 1991 section 8 & clause No.8.24

S&F M S butt hinges 100mm size medium weight cold rolled all as specified and directed

S&F 200mm aluminium anodized, barrel tower bolt of extruded section and fixed all as specified and directed.

S&F 150mm aluminium anodized, barrel tower bolt of extruded section and fixed all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised 125mm long all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt of size 300mm with hesp,staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed by Engineer-In-Charge.

M&L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over a 15mm thick screed bed of cement mortar to all as specified and 1:4 directed.

M&L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm in skirting of walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over a 10mm thick back coat of cement mortar to all as specified and 1:4 directed.

S & F coloured Non skid ceramic floor tiles 7 to 8 mm thick (Square/rectangular ) area of each tile exceeding 0.06sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured to cement to match and over a 15mm thick screed bed of cement mortar to all as specified and 1:4 directed.

M & L for glazed ceramic coloured tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat slurry and pointed in white or colour cement to match and over a 10mm thick back coat of plastering of cement mortar :1:4 all as specified and as directed by Engineer-In-Charge.

M&L for Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc complete all as specified and directed.

S & F Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado pillar laid over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ad over a 15mm thick back coat plastering of cement mortar 1:3 for laying of floor finishes complete all specified and directed.

Taking up of or down steel tubing and connections 15mm bore

All as per ser item No 25 here in before, but 25mm bore

S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

S&F 25mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

S&F in repair vitreous china wash basin, white flat back size 450X300mm including brackets, cutting for and pinning in ends of brackets or erecting stand incl 15mm bore pillar tap fancy type cast copper alloy, with captain heads, PVC connector 450mm long all as specified and directed.

S&F for 50 mm bore of pipe low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 laid in trenches all as specified and directed.

S&F in repairs PVC valveless syphonic action type flushing cistern of 10 Ltrs capacity with all accessories incl PVC connection 15mm dia 45cm long all as specified and directed.

S&F to vitreous wash down water closet pan pedestal pattern white/coloured incl with seat cover complete taking down old seat fixing bolt flush pipe complete all as specified and directed.

S&F in repair health faucet,CP, best quality of any size.Make parryware/hindware

S&F Stainless steel towel ring oval shape of (any size) for best Quality all as specified and directed.

S&F for stainless steel soap holder (any size) for best quality all as specified and directed.

S&F 15mm size angular stop cock with wall flange , CP, best quality complete all as specified and as directed.

S&F in 15mm bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S& F in stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both iron pipes 15mm dia all as specified and directed.

S&F in stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes 20mm dia all specified and directed.

S & F for 125mm Brass chromium plated shower rose complete all as specified and directed

PVC connection fibre, reinforced 45cm long with brass check nut and PVC washers at both ends complete

Dismantling of up to 100MM dia cast iron or pvc (SWR) pipes, jointed in cement mortar or and taking out of trenches, if required

Dismantling of up to 75MM dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

S & F PVC (SWR) bends 110mm dia any radius all as specified and directed

S & F PVC (SWR) bends 75mm dia any radius all as specified and directed

S & F PVC (SWR) branch pieces 110mm dia, single (single Y) equal or unequal all as specified and directed.

S & F PVC (SWR) bends 110mm dia any radius and provided with access door all as specified and directed

S & F PVC (SWR) bends 75mm dia any radius and provided with access door all as specified and directed

S & F PVC (SWR) vent cowl 110mm dia any radius all as specified and directed

S&F (SWR) gully trap 125/100mm, setting and jointing with solvent cement all as specified and directed.

M&L for PVC (SWR) floor trap with grating including jointing to waste pipe fixed with solvent cement.( Diameter of outlet in 75 mm) complete all as specified including taking out damaged floor trap in any type and position.

M & L for complete removal of existing treatment of old wall surface including brooming down/steel wire brushing, scrapping down smoke soot, mould ,moss and efflorescent salts and trading oil and greasy spouts and cleaning with water on wall complete all as specified and directed by Engr-in-charge

M & L for complete removal of existing treatment of old ceiling surface including brooming down/steel wire brushing, scrapping down smoke soot, mould ,moss and efflorescent salts and trading oil and greasy spouts and cleaning with water on wall complete all as specified and directed

M&L for two coats of white wash on old prepared plastered ceiling surfaces and all as specified and directed.

M&L for applying of 2mm thick wall care putty specified area for smooth finishing all as specified and directed.

M&L for applying two coat of oil bound distemper over coat of primer on old plastered surfaces of wall complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed

M&L for preparation of New steel surfaces of any description over 10cm width or girth and applying two coat of Synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed

M&L for preparation of New wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint and over one coat of wood primer all as specified and directed

Schedule'A' Part-II: E&M works

Taking down carefully to existing copper/Aluminium point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified.

Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLEM BRAND) top cover along with copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 1.5sqmm as continuous earth wire connected to common earth and earth dolly complete all as specified for the following :-. Make of wire : Finolex/Havells/Polycab.

(a) One light / Fan / Bell point controlled by one way switch 6 Amp .

(b) One 3 pin socket outlet 5 Amps on the same board with other switches

(c.) One 3 pin 5 Amp socket out let controlled by one switch on independent board

Point wiring for Power point controlled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLEM BRAND) top cover along with copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sqmm as continuous earth wire connected to common earth and earth dolly complete all as specified and as directed. Make of wire : Finolex/Havells/Polycab.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amps, 240 Volts complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing socket outlet 2 in 1, 3 pin, 6 Amp piano complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing socket outlet, 2 in 1, 3 pin 16/15 Amp, piano flush type complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Material & labour for lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

S&F as in replacement LED building security light 30 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismantling taking down unsv fitting any type all as specified and directed. Make- Havells cat part No.ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC or equivalent approved make of Crompton/Philips/Halonix/Bajaj

S&F MAXOLED (TUBE) 20 Watt LED tube with single side connection, 20 Watt LED 6500K and MAXOLED BATTEN - for T8 Retro Lamp (G13) ultra bright glass sheet glare free, wide angle, single side connection retrofit LED tube with G13 lamp suitable for maxoled LED tube , 230 Volts, 4 feet long , complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos all as specified and directed. Make-Havells cat part No. Tube :- LHLDEFXD5L8R020 and BATTEN Cat Part- LHFXCEP1TNNW020 or equivalent approved make of CG/Philips/ Bajaj

S&F wall mounted LED mirror light fitting 1x09 Watt,240 volt white polycarbonate housing and integrated electronic driver, prewired complete in all respect all as specified and directed.

Supply & fixing new generation energy saving LED bulk head 10W. Make :Havells Cat Part No LHEOAOP7UZ6W010 or equivalent approved make of CG/ Bajaj/ Philips

S&F LED Adore 10 watt B-22 CDL Ball Lamp, 6500K ,(Pin type), 230V, PF not less than 0.85 (min) incl . Make-Havells cat part No. LHLDERUEML8X010 or equivalent approved make of CG/Bajaj/ Philips

Supply and fixing bell push piano type one way 5/6 Amp,240 volt single pole complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fix bell AC 240 volt, single pole 50HZ complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing MCB, single pole 'B' series having braking capacity 10 KA, 6 to 32 Amp, 240 volts, complete all as specified & directed. Make : Legrand/Schneider/Havells

Supply & Fixing MCB SPN having braking capacity 10 KA, 35-60 Amp, 240 Volt 'C' Curve complete all as specified and directed. Make : Legrand/Schneider/Havells

Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, 240 Volt . Make : Legrand/Schneider/Havells

Supply and fixing fan regulator 100/120 watt step type AC 220 volts complete all as specified and as directed Make : Anchor cat no 14501 or equivalent approved make of Havells.Legrand /Schneider

Supply and fixing as in replacement MCB DB Vertical TPN 4 way (double door) incomer including bus bar neutral link, earth bar and din rail, recessed will wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. Make : Havells cat part No DHDLVDRWGOFO04 or equivalent approved make of Legrand/Schneider/L&T

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLHS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC casing capping/PVC conduit size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLHS Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. Make of wire : Finolex/Havells/Polycab/Rallison/Plaza. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Hanging or Refixing of Ceiling Fan and Electric storage water heater with capacity of 25 litre, by 5 star rated any size Including provision of suitable flexible cable as required complete all as specified and directed.

M/s Amrit Gope

M/S PRITAM ENTERPRISES

Pranjit kar

SHRI CHANDAN CHANDA