Improvements and Providing BM and BC works to Tanur Railway station Oriyamkulam Road 0/000 to 0/400 in Tanur LAC, Malappuram Dist - providing street lights

Amount

Street light & Low mast

od193127/2018_2019 : Supply and erection of 8M Octagonal pole, Top dia 70mm, Bottom dia 130mm, sheet thickness,3mm, base plate of 200x200x16mm and Foundation bolt set, Ring Type Bracket suitable for fixing 4/6 LED lights in symmetrical direction suitable for 70mm top dia poles including suitable colour painting as per the direction from the department staff.

od193148/2018_2019 : Supply and erection of 7M Octagonal pole, Top dia 70mm, Bottom dia 130mm, sheet thickness,3mm, base plate of 200x200x12mm and Foundation bolt set, Double arm decorative bracket suitable for fixing LED street lights including suitable colour painting as per the direction of department staff

od193128/2018_2019 : Supply, conveyance, installation, testing and commissioning of rectangular integral 80W LED floodlight luminaire made in pressure die cast housing and heat sink in aluminium extrusion provided with heat resistant toughened glass, with IP66 protection operating voltage range (140 -270V AC) with colour temperature should be greater than 5700K range and giving connection etc. as required. (Bajaj make BARFEG 80W / equivalant)

od193162/2018_2019 : Supply, conveyance, installation, testing and commissioning of 60W LED street light luminaire with pressure cast aluminium housing, IP66 protection, operating voltage range (140 -270V AC) with colour temperature 5700K range and giving connection etc. as required. (Bajaj Edge Plus BRLEP / equivalent )

14.1 : Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.10 : Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

od193129/2018_2019 : Steel reinforcement for RCC Work including straightening, cutting, bending, placing in position and binding all complete.

90.6.5.11 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.12.5.2 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm

90.12.5.3 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm

90.12.10.2 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.2 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)

od193130/2018_2019 : Supplying and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

od193131/2018_2019 : Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

od193132/2018_2019 : Providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

od193154/2018_2019 : Supply, providing and fixing 2.65 mm (12SWG) dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

od193156/2018_2019 : Supply and drawing 3.15mm dia bare copper conductor through existing conduit / along with wiring as required

od193158/2018_2019 : Supply of superior quality 2.65mm copper earth socket and including crimping etc. as required.

od193160/2018_2019 : Supply of superior quality 3.15mm copper earth socket and including crimping etc. as required

od193134/2018_2019 : Supply and providing 25x3mm brass nut and bolt etc. as required.

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.3.2 : Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.7 : Supply and providing copper earth bus in the panel board

od193136/2018_2019 : Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 4.00Sqmm single run

od193137/2018_2019 : Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 1.5Sqmm single run

od193138/2018_2019 : Supply and fixing Danger notice board of size, 125 x 75 mm

2.1.1 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

od193139/2018_2019 : Supplying and fixing 24Hours Timer for operating ON-OFF function in 1the existing MCB DB/enclosure complete with connections, testing and commissioning etc. as required.

od193140/2018_2019 : Supplying and fixing 32A 2Pole AC1 Power contractor in 1the existing MCB DB/enclosure complete with connections, testing and commissioning etc. as required.

od193141/2018_2019 : Supplying and fixing 32 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board

od193142/2018_2019 : Supplying and fixing 32, HRC Fuse with HRC Fuse link with connections, in existing meter board

od193164/2018_2019 : Charges for availing separate KSEB service connection including AF, OYEC, CD etc

Bidder Name

PRADEEP KUMAR.V.K