Water Supply

Supply and Transportation of 12.5HP, 8-12 Stage ,4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi/ Suguna/Sterling/ JEROME PUMPS.

Supply of 3 Core 4.00Sqmm ISI marked Flat Copper cable of ISI for Submersible Motors conforming to IS 694:2010. Makes: Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi)/Sudhakar/ Lauritz Knudsen (formerly L&T) /CRI/Suguna/Cord wave/Salzer.

Fabrication ,transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc. complete for 3 phase motor pump sets. Makes: As per list of recommended brands. Voltmeter: 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor for above 7.5 HP to 12.5 HP with Star- Delta Starter

Earthwork in excavation for Pipe Line as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 304 MORTH Manual Means. (RBR-FNDN-1)

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding taxes and specials etc., complete. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length in 6 m.) for 90mm dia 8.0 kg/ sqcm

Supply and delivery of 60/50 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights.Makes: As per list of recommended brands.

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance etc., complete (1/2" to 1")

Supply and Delivery of Pipe line and Bore well connection required material to the site including loading, unloading, transportaion & labour charges etc., complete as directed by the incharge of the work.

50mm Adopter Set

2 X 5' GI Nipple

50mm GI Long Coupling

65 X 50mm Adopter

2 X 12'' GI Nipple

50mm X 90 PVC RFTA

50x65mm mm CI Planges

Plange Wacthers

50mm MS Bore cover

Errection Charges

50mm MS Clamp Set

7/16 Service Wire

Supply of 63A, FP MCB,10KA C/D Curve ISI Mark. Makes: As per list of recommended brands as category

Supply of 100A 3 Pole MCCB,16 KA, adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I

Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz..enclosed with no volt coil and overload protection with necessary materials, etc., complete suitable for…... Makes: As per list of recommended brands. For 5.00 H.p to 7.5 H.p

Supply and delivery of borewell material As directed by the Engineer in charge of the work.

BCH Blade kit 25 Amp

Power Tek Auto matic

Supply and Transportation of 2.00HP 25 Stage, 4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi/ Suguna/Sterling/ JEROME PUMPS.

Assistant Engineer

Nandikotkur Municipality

Supply and Transportation of 12.5HP, 8-12 Stage ,4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well.Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi/ Suguna/Sterling/ JEROME PUMPS.

Supply of 3 Core 4.00Sqmm ISI marked Flat Copper cable of ISI for Submersible Motors conforming to IS 694:2010. Makes: Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi)/Sudhakar/ Lauritz Knudsen (formerly L&T) /CRI/Suguna/Cord wave/Salzer.

Fabrication ,transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc. complete for 3 phase motor pump sets. Makes: As per list of recommended brands. Voltmeter: 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor for above 7.5 HP to 12.5 HP with Star- Delta Starter

Earthwork in excavation for Pipe Line as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 304 MORTH Manual Means. (RBR-FNDN-1)

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding taxes and specials etc., complete. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length in 6 m.) for 90mm dia 8.0 kg/ sqcm

Supply and delivery of 60/50 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights.Makes: As per list of recommended brands.

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance etc., complete (1/2" to 1")

Supply and Delivery of Pipe line and Bore well connection required material to the site including loading, unloading, transportaion & labour charges etc., complete as directed by the incharge of the work.

50mm Adopter Set

2 X 5' GI Nipple

50mm GI Long Coupling

65 X 50mm Adopter

2 X 12'' GI Nipple

50mm X 90 PVC RFTA

50x65mm mm CI Planges

Plange Wacthers

50mm MS Bore cover

Errection Charges

50mm MS Clamp Set

7/16 Service Wire

Supply of 63A, FP MCB,10KA C/D Curve ISI Mark. Makes: As per list of recommended brands as category

Supply of 100A 3 Pole MCCB,16 KA, adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I

Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz..enclosed with no volt coil and overload protection with necessary materials, etc., complete suitable for…... Makes: As per list of recommended brands. For 5.00 H.p to 7.5 H.p

Supply and delivery of borewell material As directed by the Engineer in charge of the work.

BCH Blade kit 25 Amp

Power Tek Auto matic

Supply and Transportation of 2.00HP 25 Stage, 4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi/ Suguna/Sterling/ JEROME PUMPS.