Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹28.7 L+₹2.7 L (10.5%)Rejected-AOC D 47 MANORATH SOCIETY NEAR AMAR COMPLEX SAMA ROAD VADODARA 390024 | VADODARA | GUJARAT | 390024 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹32.9 L+₹6.9 L (26.6%)Rejected-AOC HARSH INFRASTRUCTURE NEAR DWARKADISH PETROLEUM NANDANA DEVBHOOMI DWARKA JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L3 | Rejected-AOC Being not L1 |
Tender Value
Refer Docs
EMD Value
₹68,500
Closing Date
19 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sachin Singhal EE GE Army Baroda
Opp Akashwani, Makarpura road PO-ONGC Baroda-390009
As per BOQ
2022_MES_547063_1
8689
Open Tender
Civil Works
Item Rate
180 days
GE Army Baroda
As per tender documents
5 documents required · 5 mandatory
₹500
Yes
GE Army Baroda
₹68,500
Yes
12 Nov 2022
23 Aug 2022
24 Sept 2022
23 Aug 2022
19 Sept 2022
6 Sept 2022
24 Aug 2022 - 5 Sept 2022
Amount
Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.
M & L for non skid coloured joint free ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, as in floors etc set set and jointed in neat cement slurry and pointed in coloured cement matching to tile color, over and including screed bed or bedding layer of cement mortar 15mm thick for laying floor finishes with CM 1:6 (Tile pattern and decoration shall be as suggested by Engineer-in-charge)
M & L for Glazed ceramic coloured walls tiles in vertical surfaces 350x 250x 6 mm to 7mm/ 450X 300X 6mm to 7mm thick set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet matching to tile color including 10 mm thick rendering in CM 1:4 to receive wall tiles (Tile pattern and decoration shall be as suggested by Engineer-in-charge).
M & L for 18 mm to 20mm thick marble of any shade(Green) as in floor, steps (in single piece), cooking platform, cills of window etc laid over and including15 mm thick screed bed in cement mortar 1 : 4 and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M & L for machine cut kota stone slab flooring 20 - 25mm thick set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to color of kota stone including screed bed or bedding layer of mortar 15 mm thick with CM 1:6 .
M & L for machine cut kota stone slab 20 - 25mm thick in skirting, riser etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to color of kota stone including rendering or backing coat in CM 1:4 to receive wall tiles.
Rounding to edges of stone slabs one edge , such as in steps, cooking plateforms & other similar situations complete all as specified and as directed.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L for 25mm thick PCC 1:2:4 type B-1 (Using 20 mm graded aggregate) as in flooring etc complete all as specified
M&L for 40 mm thick cement concrete type B-1,1:2:4 (Using 20 mm graded aggregate) as in floor, finishing cement concrete surface even and smooth with out using extra cement.complete all as specified and directed.
M & L for glass dividing strips 3 mm thick and 38 mm wide and inserted in position to confirm design complete all as specified and directed.
M & L for 100mm thick plain cement concrete (1:4:8) type D-2, using 40mm graded stone aggregate as in sub base complete, all as specified & directed.
M&L for Prepolished chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment over and including screed bed or bedding layer of mortar 20 mm thick in cement mortor 1:6 complete all as specified and directed.
M&L for providing 75 mm thick cement concrete 1:3:6 type C-1,(using 20 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.
M & L for Forming 65mm deep x 10mm thick contraction (dummy joints), filled with sealing compound grade "A".
Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each
Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each
Taking down and Refixing of door shutter exc. 1 Sqm and n.exc. 2 Sqm each in same opening.
S&F of Powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note:- Aluminium sections for shutter only measured and paid. Cost of fittings / gasket etc shall be deemed to be included in the rate quoted.)
S & F for Aluminium (extruded section) body, Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed
S&F 5.50mm thick sheet glass, ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed.
S&F 4.00mm thick sheet glass, ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed.
S&F 4.00mm thick figured glass, pin head type and glazing with rubber beading or with glazing clips, all as specified and directed.
S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete all as specified and directed.
M&L for 75mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete all as specified and directed.
S & F in repairs 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed
S & F 150 mm size extruded aluminium alloy handles, febricated type anodised
S & F aluminium anodised Hasp and staple, safety type of size 75 mm with mild steel hinge pin including bolt to hinge plate and fixed with screws
S & F 250 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters
S & F solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing and matching with door shutter shade. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .
S & F 30mm thick factory made both sides prelam panel PVC door shutter consisting of frame made out of MS tube of 19 gauges thickness and size 19mm x 19mm for stiles, top and bottom rails, MS frame shall have a coat of steel primer of approved make and manufacture. MS frame shall be covered with 5mm thick heat moulded prelam PVC C channel size 30mm thickness, 70mm width, out of which 50mm should be flat and 20mm shall be tappered in 45 degree < on either sides forming stiles and 5mm, 95mm wide prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide. prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tappered on both sides to form lock rail. Top rail, bottom rail and lock rail shall be provided either sides of the panel 10mm (5mm x2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail, and bottom rail paneling of 5mm thick both side prelam PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with 7mm (5mm+2mm) thick 15mm wide. PVC sheet beading on inner side and jointed together with solvant cement adhesive, an additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of C channel using PVC solvant adhesive etc. complete all as specified and directed.
S & F 125 mm aluminium alloy handles, cast type anodised all as specified.
S & F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.
S & F tubular curtain rails 25mm dia stainless steel 202 grade drapery type complete all as specified directed
S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed
S & F Floor door stopper 150 mm long of aluminium alloy body and toungue anodised with hard drawn steel fixed complete all as specified and directed by Engr-in-Charge
Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc,
M&L for Brickwork with sub class ‘B’ old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6
M & L for brickwork with sub class ‘B’ old size bricks bricks straight or curved to any radius in half brick thick walls built in CM 1:4
Taking down cement plaster on brick/concrete surface including raking out joints hacking for key scrubbing down with water etc.
M&L for Rendering in two layer on fair faces of brick work or concrete sur-faces of wall 5 mm thick in CM 1:4 mixed with WPC @ 3% by wt of cement finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately).
Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement)
Rendering 10 mm thick on fair faces of concrete sur-faces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement)
M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed.
M & L for preparing new plastered surfaces of wall and applying two coats cement base paint over a coat of alkali resistant primer on external wall.
M & L for preparing new plastered surfaces of ceiling and applying three coats of white wash.
M & L for preparing old plastered surfaces of ceiling and applying two coat of white wash on ceiling to match the existing surfaces.
M & L for complete removal of old existing treatment completely by scrapping and or rubbing of wall and applying two coats of oil bound distemper over a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed.
M & L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre. Hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flate 40X30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.
M & L for 12mm Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finish (frame work for ceiling shall be measured and paid separately).
S&F in repairs 15mm bore bib tap, fancy type, cast copper alloy with crutch of butterfly handle, screwed down, high pressure for iron pipe or for brass ferrule
S & F in repairs stop valves/Angle valve15mm bore fancy type chromium plated screwed both ends for iron pipe or for unions and fixed
S & F in repairs 25mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed
S & F 125mm dia chromium plated shower rose with swivel joints including fixing to GI union complete
S&F in repair 75 mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
S&F for PVC (SWR) bends any radius 75 mm bore pipe complete all as specified and directed.
S&F for 75mm PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.
S & F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.
S & F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.
Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.
S & F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.
Dismantling of water storage tank of 500 to 1000 ltrs capacity.
S&F for rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specifed and directed.
S & F in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screwed for iron pipe or brass ferrule and fixed
S&F in repair for sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and waste incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connectings union to pipe overall size 915mmx460mmbowl size 410mmx330mmx160mm complete all as per specified and directed.
S&F in repair vitreous china Wash hand basin, white , flat back size 550x400 mm except taps, CP waste coupling but incl brackets all as specified. Make cera/Hindware
S & F 32 mm dia stainless steel waste coupling for wash hand basin all as specified and directed. Make : Prayag or equivalant.
S & F PVC connections 15mm size with PTMT nuts of length 450mm
S&F vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including making good complete all as specifed and directed.
S&F plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed.
S & F for PVC low level flushing cistern, white, 10 Ltrs capacity complete with all internal accessories & fixed to wall & making good to wall surfaces incl. taking down existing flushing cistern complete.
S & F brass CP hand sprey (Health Faucet) for EWC including bracket and 1.5m long connection pipe complete.
S&F 15mm bore pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed for iron pipe and fixed
S & F in repairs 20mm dia brass chrom plated tubular towel rail complete.
M & L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.
Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.
M & L for nominal mix reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate as in lintel, lintel beams; Roof beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete.
M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specifed and as directed.
M & L for mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Use and waste formwork for rough finished flat surface of concrete sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc..
M&L for Providing reinforced cement concrete 1:2:4 (nominal mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note. (reinforcement shall be measured and paid separately)
M&L for preparation of reinforcement and apply corrosion resisting coat rust remover in two coats, (suitable time to be provided between coats according to manufacturers instruction) to resist further deterioration of reinforcement etc complete all as specified and as directed
M&L for apply Epoxy Bonding agent (2 part solvent free epox based bonding agent) to old concrete surface/mortar before applying the plastering to the surface complete all as specified and as directed
Providing and laying super fluid microconcrete -roffe crete repairs (or equivalent as specified in the list of brand names) in beam bottoms, columns, slabs etc, including mixing with 5mm to 10mm size aggregates, waterproof ply wood/steel plate shuttering, pouring, temping, consolidating, curing etc complete as per manufacturer's specification and consultants Instructions. Note :- This item shall be paid on actual consumption of Micro concrete.
M & L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia, roof bands etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required complete and applying three coat of white wash/two coat of cement base pint to match with the existing surface as directed by the Engr- in -Charge .
Cutting chases for concealed pipe where required and pointing in cement mortor 1:3 etc in brick ball for bore of pipe 15/20 mm complete all as specified.
M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed
Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixtures such as switches sockets, ceiling rose, fan regulators, etc (except light fittings), and making good disturbed surface of wall, floors, etc complete all as directed by Engr-in-Charge.
M & L for Point wiring complete with 1.5 sqmm single core PVC insulated (FRLS) and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC Conduit and all accessories Concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc complete including cutting of chases where as required and making good all disturbed work to match the existing all as specified and as directed for the following:-
One light point controlled by one switch.
One fan point controlled by one switch & fan regulator.
One exhaust / wall mounted fan point controlled by one switch.
One 3 pin socket outlet 5 Amps on independent board.
One 3 pin socket outlet 5 Amps on the same board with other switch.
All as per item No.96 here-inbefore but with 2.5 sqmm PVC insulated multistranded flexible unsheathed copper conductor inclusive of 2.5 sqmm PVC insulated multistranded flexible copper conductor for one independent 6 pin 16 Amp socket.
M & L for sub main wiring complete with two runs of 4.0 Sqmm FRLS single core PVC insulated insheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including rigid PVC casing and capping ISI Marked medium grade with all connected accessories on wall/ floors etc including one run of 4.0 sqmmm FRLS single core multistranded copper conductor as earth continuity conductor complete including taking down old sub main wiring and making good all disturbed work to match the existing all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one, run of conduit & one run of earth continuity conductor shall be measured as one running metre.
S & F switch piano flush type SP one way 6 Amp.
S & F for switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal.
S & F for switch socket combination 2 in 1, 6 amp flush type universal.
S & F for Socket outlet 2 in 1 , 3 pin, 6 Amps flush type.
S & F ceiling rose surface polycarbonate body three terminal.
S & F LED ceiling light fitting of size 600mm X 600mm, 36 Watt, 220 Volt AC recessed type with high efficiency PMMA diffuser with soft glare free light complete with drivers, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete including taking down old unserviceable light fitting complete all as specified and directed.
S & F wall mounted fan energy efficient 300mm sweep plastic body with pull cord, 240 AC, 50 Hz, single phase with all accesseries complete all as specified and directed Make- Orient / Havells / CG
S & F sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amp.
S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings including LED lamp 7watt complete all as specified and directed.
S & F LED light fitting 1X20Watt, 220 Volt AC decorative box type with drivers, holders and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old unserviceable existing light fitting complete all as specified and directed.
S & F of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable light fitting complete all as specified and directed.
S & F exhaust fan made of sturdy engineering plastic complete, with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 250mm including exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV exhaust fan complete all as specified and directed. Note : 1) Old unserviceable Exhaust fans shall be deposited to AGE E/M store yard .
M & L for sub main wiring complete with two runs of 6.0 Sqmm FRLS single core PVC insulated insheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC casing and capping ISI Marked medium grade with all connected accessories on wall/ floors etc including one run of 6.0 sqmmm FRLS single core multistranded copper conductor as earth continuity conductor complete including taking down old sub main wiring and making good all disturbed work to match the existing all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable. one run of conduit & one run of earth continuity conductor shall be measured as one running metre.
S & F for sheet metal enclosures distribution board double door,TPN vertical suitable for fixing of Four pole MCCB as in commer & MCBs SP as out going and duly fitted with Bus bar, Neutral link, blanking plates etc complete.The DB shall be included with one No MCCB, 4 pole, 415/430 150 Amps Volt, fixed megnetic and thermal release, having rupturing capacity 16 KA on 415 V icu. Encloser & MCCB shall preferably of same make fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed. ( MCB s required for out going shall be measured and paid separately)
S & F sheet metal enclosures (double door) for DBs where MCBs to be used single pole and neutral 8 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed
S & F incl connecting MCB single pole, rupturing capacity 10KA, 6 amps to 32 amps as ordered 240 Volts
S & F MCB Single pole and neutral (SPN), rupturing capacity 10KA, 240 V 63 amps as ordered.
Taking down existing earthing and M & L Earthing complete with galvanised steel earth plate electrode, 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level,connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including necessary excavation and earthwork in any type of soil all as specified or indicated including testing on completion
Supply and install hi wall split units indoor/outdoor Air conditioner of capacity 1.5 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2. complete with all fittings and accessories all as specified and directed
S & F for Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 04 KVA complete all as specified and directed
Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc and shafts, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/loose soil complete
Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete
Returning filling in excavated approved soil including spreading, leveling, watering and well ramming in layers n.exc 25cm in soil completed all as specified and directed
M & L for sand cushoning to cable withdry river sand and punning to required thickness for UG cables complete
M & L for brick protection cover to electric cable with sub class 'B' bricks laid dry and flat abutting each other with gap between adjascent not exceeding 10mm.
Supply and laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 70sq. mm 3.5 Core nominal cross section in service connections .
M & L for galvanized steel tubing light Grade of 50 mm dia protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.
Shree Vaishno Enterprises
Harsh Infrastructure
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .