Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.2 LAccepted-AOC C 234 ADG P CHENNAI | L1 | Accepted-AOC L1 bid of GMS Builders accepted after deducting amount of Schedule of Credit | |
| 2 | L2₹26.3 L+₹1.1 L (4.53%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹27.2 L+₹2.0 L (7.83%)Rejected-Finance DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L3 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
5 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2023_MES_585159_1
GE MAINT EZHIMALA 8540
Open Tender
Civil Works
Item Rate
90 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹60,000
Yes
28 Apr 2023
10 Mar 2023
7 Apr 2023
10 Mar 2023
5 Apr 2023
24 Mar 2023
11 Mar 2023 - 18 Mar 2023
Amount
Notes:- The following things need to be considered while quoting the rates:- 1. Contractor need to do preparation and painting of kerb stone / crash barriers by mechanical methods only. 2. Contractor need to ensure the safety of labours working at heights with taking insurance policy, providing proper PPE kit and adhere all safety norms. 3. Contractor need to remove all debris obtained from work without any delay to the dumping yards shown by department anywhere inside INA Ezhimala area. 4. Contractor need to understand the importance of POP and should employ sufficient labours to meet the requirements. 5. Contractor should procure the entire quantity of paint as per CA in single purchase and all the buckets should be numbered and shown to Engg in Charge with in 20 days of acceptance. If there is any valid reason for delay in procurement, the reason shall be informed to Engg in Charge on time in writing. 6. All the surfaces should be cleaned with water jet wash/ mechanical means before application of paint. All painting work will also be done through mechanical means. 7. No electricity will be supplied by MES. Contractor should make his own arrangements for transportation of water needed for washing, generator for electricity etc without any extra charge to the department. 8. Contractor should ensure proper covering of areas adjacent to painting with plastic sheets/ papers to avoid dripping marks of paint. Contractor should clean then and there if any painting drops/marks immediately before shifting to next place.
M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on wall using suitable mechanical sprayer complete all as specified and as directed by Engineer in charge.
M&L for preparation of old treated surfaces and applying one coat of exterior emulsion weather proof anti-fungal paint on wall including necessary scaffolding and using suitable mechanical sprayer complete all as specified and as directed by Engineer in charge and as per manufacturers instructions.
M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on ceiling including necessary scaffolding using suitable mechanical sprayer complete all as specified and as directed by Engineer in charge and as per manufacturers instructions.
M&L for preparation of old decorated surfaces and applying one coat of white wash on ceiling complete all as specified and as per manufacturers instructions.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth upto a height of 20 metres and applying one coat of epoxy paint including necessary scaffolding and using suitable mechanical sprayer complete all as specified and as directed by Engineer in charge.
M&L for preperation of old decorated surfaces and applying one coat of sandtex matt finish on wall including necessary scaffolding and using suitable mechanical sprayer complete all as specified and as directed by Engineer in charge and as per manufacturer instructions.
M&L for preparation of old painted steel surfaces of any description including rafter , purlins etc..(up to a height of 20 mtr) over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surfaces including necessary scaffoldings complete all as specified and as directed.
M&L for preparation of old plastered surfaces by using water jet spray and applying one coat of acrylic emulsion paint (exterior grade) on surfaces of parapet wall/ kerb stone guard wall etc with using mechanical sprayer to paint complete all as specified and directed.
M&L for preparation of old plastered surfaces by using water jet spray and applying two coats of acrylic emulsion paint (exterior grade) on surfaces of parapet wall/ kerb stone guard wall etc with using mechanical sprayer to paint complete all as specifed and directed.
M&L for preparation of old plastered surfaces by using water jet spray and applying one coat of synthetic enamel paint on surfaces of wall / kerb stone over and including priming paint plaster coat etc. with using mechanical sprayer to paint complete all as specified and directed.
All as per item No.11 above but two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old treated MP roof tile surfaces by cleaning with wire brushes to remove all existing fungal growth etc and cleaning with water jet spray and applying one coat of antifungal paint using UNIGLOSS deluxe multi surface paint or equivalent including necessary scaffolding using suitable mechanical sprayer complete all as specified and as directed by Engineer in charge and as per manufacturer's instructions.
Grinding & polishing (Mirror finish) to existing stone topping (Kota, Marble etc..) of any description of floors or in surfaces with electric grinding machine & hand grinding machine complete all as specified and directed.
M&L for painting lines, dashes, arrows, letters etc on road, pavement and the like not exceeding 10 cm and 2.5 mm thick using hot thermoplastic road marking paint for centre line and pedestrain crossing mixed with reflectorising glass beads at 250grams/Sqm all as specified on finished road surfaces in molten state using suitable mechanical sprayer complete all as specified and as directed by Engineer in charge.
M&L for complete removal of existing treatment from the surface of any description over 10cm in width or girth and applying wood filler liquid transparent and two coats of synthetic varnish complete all as specified and directed.
M&L for preperation of old treated surfaces of floor and applying one coat of terracota paint on floor/wall surfaces complete all as specified and directed.
M&L for taking out the damged filling compound of any material and widening/ making the joints in-between by cutting the granite/tiles/any type of floor upto a minimum width of 4 mm and depth of 10 mm by keeping proper alignments on both directions as directed and epoxy filling of joints with approved colour epoxy compound complete all as specified and directed.
M&L for premix bitumen/ readymix bitumen filled in potholes or unlevelled road surfaces after cleaning the surface thoroughly using brooms, gunny bags etc and packing properly all loose aggregates levelled if any. The bitumen surface shall be levelled and matched with adjacent road surfaces and should be tamped and consolidated with manual / mechanical methods complete all as specified and directed.
M&L for taking down aluminum ventilators/ windows of any size and any description at a height upto 20 mtrs , chipping down the cill of ventilator/ windows for a minimum of 25 mm for entire width of cill, providing slope towards outer side of building using 1:2 cement mortar mixed with liquid waterproofing compound to match the previous cill level, refixing of taken down ventilators/ windows after changing all the rubber beadings, packing the gap between bottom of window/ ventilator frame and cill with rich cement mortar and finished with silicon/ epoxy/ PU based water resistant joint filler as directed by Engg in Charge, painting the newly plastered cill surface with exterior/interior emulsion to match the shade of existing adjoining surfaces including all necessary scaffolding etc. Notes:- 1. Contractor should take down and keep the aluminium windows/ventilators with atmost care. If in any case the aluminium, glazing or any connected item gets damaged, contractor should replace the same with same nature of material without any cost to department. 2. All the taken down items should be kept in the safe custody of contractor itself, no claim for loss or misplace will be accepted. 3. Contractor should keep a ladder from accessable area to the working place all time for inspection of work. 4. Since the work is done near to the ceiling of building, the safety of the team should be ensured by contractor. 5. The work is considered for dining hall of a mess.No clear site will be available and work is to be done in peace meal when the dining hall is not in use. Contractor need to quote rate accordingly by calculating the wastage of manpower and shiftings etc and no claims will be accepted afterwards. 6. Contractor should understand that this item is catered for arresting of leakages through the sides of ventilators/ windows and the same shall be attended on priority number 1 of this contract. No delay in the execution of this item will be accepted and this work need to be finised before monsoons. 7. There are approximately 4 bays of ventilators/ windows on 4 sides. So it is strictly advised that the Contractor should visit the site before quoting of rate. The counted areas include both sides of dining hall with both front and back sides.
S&F powder coated aluminium sections for frame and shutters of doors, windows, ventilators, partitions etc with one or more rebates including necessary neoprene packing etc, the work need to be done at a height upto 20 mts complete all as specified and as directed. Note:- Minimum thickness of powder coating not less than 50 Micron.
M&L for 4.8 mm thick sheet glass ordinary quality any size in each pane and glazing with aluminium beading complete all as specified and as directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or in mortar complete all as specified and as directed.
M&L for stone grit for cushion bed below interlocking paver blocks complete all as specified and directed by Engineer in charge.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed.
All as per item No.26 above but except tiles complete all as specified and as directed.
Dismantling and cleaning for refixing of sadarahalli stone cladding fixed with clamps including necessary scaffolding/boomlift arrangement of appropriate design upto a height of 30 meters from finish/average ground level complete all as specified and directed.
S&F 20 to 25 mm flame finished sadarahalli machine cut stone cladding laid dry fixed with stainless steel clamp and anchor fasteners and headless bolts on vertical surface of wall and column by the following method:- a) Make suitable depression (approx. 5mm width and 25 mm depth on vertical face of stone fix the clamp). b) Make suitable drill hole to the surface of stone and wall/column to fix anchor fasteners. c) Make good the surface of drilled portion (where bolts are inserted) using universal surface filler(supertak or equivalent). Note:- Supply only hilti make anchor fasteners, clamps and bolts will be measured and paid separately.
All as per item no 29 above but except sadarahalli stone complete all as specified and directed.
Supply only hilti make stainless steel anchor fastener- 10 x 80mm and stainless steel clamp 5 x 50 mm for fixing of sadrahalli stone cladding complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
M&L for providing polyester foil coated aluminium alloy (metal planks) for false ceiling in repair as per manufacturers instructions complete all as specified and directed.
All as per item ser No 33 above but fixing only complete all as specified and directed.
S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 100 mm thick cement concrete 1:2:4 type B-1, (using 20mm graded granite stone aggregate) as in hard standing make impressions while concrete is green complete all as specified and directed.
LAKSHMI BUILDERS
KDR CONSTRUCTION
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .