Retrofitting documenting repair work of building of Central Waqf Council

14 22.5 Providing and laying water proofing treatment in sunken

portion of WCs, bathroom etc., by applying cement

slurry mixed with water proofing cement compound

consisting of applying : a) First layer of slurry of

cement @ 0.488 kg /sqm mixed with water proofing

cement compound @ 0.253 kg/sqm. This layer will be

allowed to air cure for 4 hours. b) Second layer of

slurry of cement @ 0.242 kg/ sqm mixed with

water proofing cement compound @ 0.126 kg/

sqm. This layer will be allowed to air cure for 4 hours

followed with water curing for 48 hours. The rate

includes preparation of surface, treatment and sealing of

all joints, corners, junctions of pipes and masonry with

polymer mixed slurry.

15 14.72 Providing and fixing double scaffolding system (cup lock

type) on the exterior side, up to seven story height

made with 40 mm dia M.S. tube 1.5 m centre to centre,

horizontal & vertical tubes joining with cup & lock

system with M.S. tubes, M.S. tube challies, M.S.

clamps and M.S. staircase system in the scaffolding

for working platform etc. and maintaining it in a

serviceable condition for the required duration as

approved and removing it there after .The scaffolding

system shall be stiffened with bracings, runners,

connection with the building etc wherever required SQM 1380 338.25 466785.00

for inspection of work at required locations with

essential safety features for the workmen etc.

complete as per directions and approval of

Engineerin- charge .The elevational area of the

scaffolding shall be measured for payment purpose .The

payment will be made once irrespective of duration of

Note: - This item to be used for maintenance work

judicially, necessary deduction for scaffolding in the

existing item to be done.

Digitally signed by AMIT

DSR Ref. DSR NDSR

S.No. UNIT QTY MR Rate DSR Amount

No. RATE Amount

16 11.56 Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as

curvilinear portions of the building all complete as

per the architectural drawings with 18 mm thick

stone slab over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and

jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade

including rubbing, curing and polishing etc. all complete

as specified and as directed by the Engineer-in-Charge.

17 13.11 Finishing wall with textured exterior paint of required

13.110.1 old work (two or more coat on existing cement paints

surface Applied @3.28 ltr/10 sqm. SQM 1415 218.54 309234.10

18 13.61 Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade:

13.61.1 Two or more coats on new work SQM 347 155.9 54097.30

19 13.48 Finishing with Deluxe Multi surface paint system for

interiors and exteriors using Primer as per

manufacturers specifications:

13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm

over and including one coat of Special primer applied @ SQM 2845 193.7 551076.50

0.75 ltr /10 sqm

20 13.115 Varnishing with flatting varnish of approved brand and

manufactured one or more coat on old work SQM 87 99.7 8673.90

21 13.26 Providing and applying plaster of paris putty of 2mm

thickness over plaster surface to prepare thr surface SQM 1430 262.7 375661.00

even and smooth.

Digitally signed by AMIT

DSR Ref. DSR NDSR

S.No. UNIT QTY MR Rate DSR Amount

No. RATE Amount

22 13.21 pebble das plaster upto 10m height above ground level

with a mixture of washed pebble or crushed stone 6mm

to 12 mm nominal size, dash over and including fresh

plaster in two layer under 12 mm cement plaster 1:4 (1

cement:4 sand) and top layer 10 mm cement plaster SQM 63 829.95 52286.85

with mortor 1:3(1 cement :3 sand) mixed 10% finely

ground hydrated lime by volume of cement.

23 6.13 Half brick masonry with common burnt clay F.P.S.

(non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 48 1150 55200.00

5.9 Centering and shuttering including strutting, propping

etc. and removal of form for :

5.9.19 whether shed,chajjas, corbels etc including edges

5.3 Reinforced cement concrete work in beams, suspended

floors, roofs having slope up to 15° landings, balconies,

shelves, chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases up to floor five

level excluding the cost of centering, shuttering, CUM 2 11505.5 23011.00

finishing and reinforcement, with 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm

24 13.2 CEMENT PLASTER :- 15 mm cement plaster on the

rough side of single or half brick wall of mix.

25 13.4 12 mm cement plaster of mix

1:4 (1 cement: 4 coarse sand) SQM 156 357.35 55746.60

Digitally signed by AMIT

DSR Ref. DSR NDSR

S.No. UNIT QTY MR Rate DSR Amount

No. RATE Amount

26 MR Providing and fixing vitrifed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer),

of approved make, in all colours of any size as

approved by Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade

27 11.41A Providing and laying Vitrified tiles in floor in

different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08%

and conforming to IS:15622, of approved brand &

manufacturer, in all colours and shade, laid on 20 mm

thick cement mortar 1:4 (1 cement: 4 coarse

sand) jointing with grey cement slurry @3.3

kg/sqm including grouting the joints with white cement SQM 65 1798 116870.00

and matching pigments etc. The tiles must be cut with

the zero chipping diamond cutter only . Laying of tiles

will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet

for placing the tiles gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

28 MR Grouting the joints of flooring tiles having joints of upto

5 mm width, using epoxy grout mix of 0.70 kg of

organic coated filler of desired shade (0.10 kg of

hardener and 0.20 kg of resin per kg), including filling / SQM 224 226 50631.0512

grouting and finishing complete as per direction of

Engineer-in-charge.

29 13.96 Painting (one or more coats) on rains water,soil waste

and vent pipes and fitting with synthetic enamel paint of

approved brand and manufacture and required colour on

30 18.25 providind and laying S&S C.I standard special such as

tees,bends,collars,tpaers caps etc (heavy Class)

Digitally signed by AMIT

DSR Ref. DSR NDSR

S.No. UNIT QTY MR Rate DSR Amount

No. RATE Amount

31 18.27 providind and laying S&S C.I pipes (class-LA) confirming

18.27.1 100 mm dia pipe

32 12.45 Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats

of size 25 mm wide x 1.6 mm thick with flanges of 27

mm and 37mm, at 1200 mm centre to centre, one

flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50

mm of required length with nuts & bolts of required size

and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running SQM 18 1355.8 24404.40

at the spacing of 1200 mm centre to centre, to which

the ceiling section 0.5 mm thick bottom wedge of 80

mm with tapered flanges of 26 mm each having lips of

10.5 mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of

2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels

0.5 mm thick 27 mm high having flanges of 20 mm and

33 Charges for required test to be done (before/after

commissioning of work) at site 25000.00

Add Modification factor on account of GST DSR-2023 @ 0.973 42,29,091.89

Add cost index @3% on base of 100 43,55,964.65

Grand total 44,43,789.00

Grand total 44,43,789.00

Digitally signed by AMIT