REPAIRS TO ATTEND DAY TO DAY B/R COMPLAINTS, REPAIRS AND CLEANING OF SEWAGE LINES, MANHOLES, SEPTIC TANKS IN VSV AND CIVILIAN MD ACCN AREA AT AFS BIDAR

Amount

Note for attending day to day complaints :- (a) Contractor shall detail his supervisor to office of Engineer-in-Charge daily by 9.00 AM who will report to concerned Engineer-in-Charge / JE to receive all complaints related to (plumbing / Carpenter / blockages, etc) of entire area under this contract. (b) Contractor shall provide service providers for all the Complaint cell as per the complaints list given alongwith all requisite tools, equipments, including safety measures for attending complaint and ensure completion report by 5.00 PM same day. (c) The complaints related to internal plumbing / blockages (WC / bath / kitchen, etc) shall be attended on the same day (within 12 hour). (d) In case any complaint pertaining to Plumbing/Sewage/ electrical is not attended on same day, penalty @ Rs. 100/- per complaint will be deducted from contractor payments.

Supply and Fixing in repairs GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 15mm dia bore complete all as specified and directed

Supply and Fixing in repairs GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 20mm dia bore complete all as specified and as directed.

Supply and Fixing in repairs 15mm medium grade GI Elbows, sockets, Tee (ISI Mark), complete all as specified and as directed.

Supply and Fixing in repairs 15mm medium grade GI Union sockets, (ISI Mark), complete all as specified and as directed.

Supply and Fixing in repairs 15mm medium grade GI Nipple 1/2'' X 3" (ISI Mark), complete all as specified and as directed.

Supply and Fixing in repairs GI plug cap for 15mm dia pipe complete all as specified and as directed.

Supply and Fixing in repairs GI plug cap for 20mm dia pipe complete all as specified and as directed.

Supply and Fixing in reparis CI brackets for WHB/Sink including fillng with concrete and finishing the surfaces with adjacent finishes complete all as specified and as directed

Supply and Fixing in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe complete all specified and as directed. Make: Parryware CAT No. C8964 (S-Trap) or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Vitreous china squatting Pan 'Orrisa' Pattern size 580 x 420 mm white with integral foot rest, P or S Trap, and lime concrete bedding complete making good disturb ground complete all as specified and as directed. Make: Parryware CAT No. C0126CS or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and as directed. Make: Parryware CAT No. E8333 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Stainless steel sink (glossy) made out of 1.00mm thick (304 grade steel) sheet for kitchen with plug, washers, waste pipe, connecting union overall size 495mmx420mm with bowl size 410mmx330mmx160mm including 32mm bore PTMT Waste coupling, fixing in cement mortar on to dwarf wall or fixing cantilever brackets complete all as specified and as directed. Make : Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Stainless steel sink (glossy) with drainage board made out of 1.00mm thick (304 grade steel) sheet for kitchen with plug, washers, waste pipe, connecting union overall size 915mm x 460mm with bowl size 10mm x 330mm x 160mm including 32mm bore PTMT Waste coupling, fixing in cement mortar on to dwarf wall or fixing cantilever brackets complete all as specified and as directed. Make : Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Vitreous China, white, Wash Hand Basins, size 530 X 410 mm (Flat Back or Angle Back type) including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long, a Pair of Angle iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. Make : Parryware CAT No. C041C or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Vitreous China bowl urinal flat back, size of 380 x 405 x 590 mm white (minimum), with grating and union for discharge pipe including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long complete all as specified and as directed. Make : Parryware CAT No. C0583 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 15mm bore chromium plated cast copper alloy Bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule with wall flange, complete all as specified and as directed. Make: Parryware CAT No. G0204A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 500cm long and 125cm wide with chromium plated bracket guard and railing complete all as specified and as directed. Make: Parryware CAT No. T6009A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Wash basin oval shape counter top of size 555 x 450 x 205 mm in any coloured including 32mm bore CP Waste coupling and PVC connection pipe of 15mm x 450mm long complete all as specified and as directed. Make : Parryware CAT No. C0407 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fixing in repairs 15mm bore Brass CP mixer (3 in 1) with wall flange (provision for over head shower and hand shower) for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed. Make : Parryware CAT No. G022FA1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fixing in repairs 15mm bore ABS hand shower multiflow 100mm with 1.5m SS tube & ABS hook complete all as specified and as directed. Make : Parryware CAT No. G022FA1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 15mm bore CP 2- Way bib cock double handle with wall flanges, glossy finish complete all as specified and as directed. Make: Parryware CAT No. G021ZA1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Brass CP Health Faucet with 1 m SS Chrome plated tube & hook complete all as specified and directed. Make: Parryware CAT No. T9805A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 5mm thick glass corner glass self of 300mm radius with CP brass railing fixed with brass Brackets complete all as specified and directed. Make- Parryware CAT No. T6010A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs brass peg set of six with screws complete all as specified and directed. Make- Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 15mm dia angle stop cock with wall flange, fancy type of chromium plated complete all as specified and as directed. Make: Parryware CAT No. G0253A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Stainless steel Soap dish complete all as specified and as directed. Make: Parryware CAT No. T5903A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs SS grating 100mm dia complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs SS grating with waste hole 100mm dia complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs PVC waster pipe 32mm bore of length 900mm for WHB/Sink/Urinal etc. complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs PVC waster pipe 40mm bore of length 900mm for WHB/Sink/Urinal etc. complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs brass spindles of any size, complete all as specified and as directed.

Supply and Fixing in repairs Syphon for low level flushing cistern complete all as specified and as directed. Make : Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Ball cock with ball for low level flushing cistern complete all as specified and as directed. Make : Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs handle with lever for low level flushing cistern complete all as specified and as directed. Make : Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs PVC washer for Bib cock 15mm dia complete all as specified and as directed.

Supply and Fixing in repairs PVC washer for L/L flushing cistern complete all as specified and as directed.

Supply and Fixing in repairs 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, fancy type of chromium plated complete all as specified and as directed. Make : Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs CP Pillar cock 15mm dia bore with capstan heads, screwed down high pressure, with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and as directed. Make: Parryware CAT No. G0202A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs brass chromium plated shower rose 150mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed. Make: Parryware CAT No. T5135A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs tubular towel rail 20mm dia D type 60cm long between flanges chromium plated all as specified and directed. Make: Parryware CAT No. T5901A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Brass Towel ring Complete all as specified and directed. Make: Parryware CAT No. T5902A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs plastic water closet seat black/white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminium device complete all as specified and as directed. Make : Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. Make : Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs CP waste coupling 32mm dia for glazed ware sinks, basins etc, complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs CP waste coupling 40mm dia for glazed ware sinks, basins etc, complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs PVC connection 450mm long of 15mm bore with pair of brass check nuts, complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs PVC connection 600mm long of 15mm bore with pair of brass check nuts, complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs double layered Rotational moulded polyethene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank,including 20mm Ball Valves, 20mm Tank nipple complete all as specified and as directed.

Supply and Fixing in repairs double layered Rotational moulded polyethene water storage tanks 500 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank,including 20mm Ball Valves, 20mm Tank nipple, complete all as specified and as directed.

Cleaning of overhead tank of capacity exceeding 250 not exceeding 500 litre, removing scales, dirt, sludge from mouths, washing down with detergent powder, bleaching powder & writing the date of cleaning with paint complete all as specified and as directed

Cleaning of overhead tank of capacity exceeding 500 not exceeding 1000 litre, removing scales, dirt, sludge from mouths, washing down with detergent powder, bleaching powder & writing the date of cleaning with paint complete all as specified and as directed

Supply and Fixing in repairs PVC OH tank covers for 500/1000 ltrs fixing with suitable arrangement complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc. complete all as specified and as directed.

Supply and Fixing in repairs 110mm dia PVC (SWR) pipes, type 'B', single socketed, in any length with rubber joints fixed to walls etc. complete all as specified and as directed.

Supply and Fixing in repairs 75 mm dia PVC (SWR) pipes, type 'B', single socketed, in any length with rubber joints fixed to walls etc. complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) junction single,(Single T) 110mm dia equal or unequal with access door complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) branch piece, (Single Y) 110mm dia equal or unequal with access door complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) branch piece, (Single Y) 75mm dia equal or unequal with access door complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc.complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and Labour for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and Labour for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and Labour for Vitrified ceramic tiles 10mm thick light shade (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick backing coat in CM 1:4.etc, complete all as specified and as directed.

Material and Labour for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick rendering in CM 1:4.etc,complete all as specified and as directed.

Material and Labour for Granite (of any type) 18-20 mm thick, work table, rubbed and polished in steps, jambs, piller, window cills, cooking platforms and like including pointing in white cement (1:2),with admixtures of pigment to match with shade of granite complete all as specified and as directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc.complete all as specified and as directed.

Material and Labour for Rendering 15 mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement in external surfaces complete all as specified and as directed.

Material and Labour for Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed.

Taking down shutters of any description n exc 1 sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Taking down shutters of any description exc 2 sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Supply and Fixing in repairs Butt Hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100 mm long complete all as specified and as directed.

Supply and Fixing in repairs Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as specified and as directed.

Supply and Fixing in repairs Aluminum anodised bow handle fabricated type extruded section of 100mm long complete all as specified and as directed.

Supply and Fixing in repairs Aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

Supply and Fixing in repairs Aluminum anodised barrel tower bolts of extruded section 100mm long complete all as specified and as directed.

Supply and Fixing in repairs Aluminum aodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply and Fixing in repairs 150 mm over all length of cover plate of floor Door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and as directed.

Supply and Fixing in repairs 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fixed in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Supply and Fixing in repairs Mortice lock brass 4 levers vertical type, size 100mm complete all as specified and as directed.

Supply and Fixing in repairs stainless steel 25mm dia Curtain rods with finial supports etc, with wall thickness not less than 1.2 mm, complete all as specified and directed.

Supply and Fixing in repairs 25mm dia cromium plated fancy type decorated approved design brackets with end sockets to hold the curtain rod properly complete all as specified.

Supply and Fixing in repairs 12mm thick prelaminated particle board interior grade, both side laminated with decorative choice, fixed with screws to timber frames work for shutters of ward robes, cabinets etc complete all as specified and as directed.

Supply and Fixing in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescomplete, complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Material and Labour for sheet glass 4mm thick ordinary quality and glazing with including necessary oil putty, joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, glazing in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

Material and Labour for Sheet glass 5.5mm thick ,ordinary quality and glazing with including necessary oil putty, joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, glazing oil putty in square n. exc 0.5 sqm in each pane,complete all as specified and as directed.

Material and Labour for Welding in repairs n.exc 2.5cm in length and n.exc 6mm thickness of metal including cleaning and preparing the surface complete all as specified and as directed.

Material and Labour for Welding in repairs exc 2.5cm but n. exc 5.0cm in length and n.exc 6mm thickness of metal including cleaning and preparing the surface complete all as specified and as directed.

Supply and fixing in repairs 40mm dia cup board konbs, mild steel bright finished fixed nut, screws and washers or brass polished complete all as specified and as directed

Supply and fixing in repairs Oil putty glazing with spring Clips in metal surrounds n exc 0.5 Sqm in each panel complete all as specified and as directed

Supply and fixing in repairs Oil putty glazing with spring Clips in metal surrounds exc 0.5 Sqm but n exc in each panel complete all as specified and as directed

Opening, Cleaning and clearing the blocked WHB, Nahani trap, gully trap, floor trap, bottle trap, water closet (Indian/Orissa or English type) operational; at any floor including cleaning of traps and CI drain pipe (any type and any position) from WC's / trap to manhole Cleaning and well flushing, pressure pumping , taking out all residues etc and removing the same to distance not exceeding 1000m, burried the same underground in low laying area and covering the same with earth including removal of surplus soil to a distance not exceeding 500m. complete all as specified and directed.

Cleaning of blocked sewage lines of any dia and including man holes (between manhole to manhole and man hole to septic tank) of depth up to 1.50m by mechanical means (or by rodding with bamboo and gunny bags where mechanical means is not possible) and removing muck sludge/silt/liquid/night soil (in foul position) and removing the same using sealed tins or sludge removal tankers to a distance exceeding 50m outside of MD land premises and refixing the manhole covers in same position etc and testing of man holes by filling with water etc complete all as specified and directed.

All as per Serial item No.101 here-in-above, but depth exceeding 1.5 metres and not exceeding 3.00 metres complete all as specified and directed.

Removing manhole covers, Cleaning of manhole chamber of depth up to 1.5m, removing muck sludge/silt/liquid mud etc, (in foul position using sealed tins or sludge removal tankers) to a distance exceeding 50m outside MD land premises, testing of manholes by filling with water etc and relaying the manhole covers in same position complete all as specified and directed.

All as per Serial item No.103 here-in-above; but depth exceeding 1.5 metres and not exceeding 3.00 metres complete all as specified and directed.

Opening covers of Septic tank, Soak wells, removing/bailing out liquid along with floating material, sludge from any position in foul conditions by mechanical means using suction pump, hose pipe and its accessories mounted on vehicle so that pumping can be easily be carried, cleaning the inlets and outlets with water, disposing off the sludge to a distance exceeding 50m outside MD land premises complete, relaying the covers back in position and including rough excavation for burring the liquid, sludge in the excavated area and levelling the same all as specified and as directed by the Engineer-in-charge. Notes:- (i) Quoted rate shall deemed to include rough excavation to burry liquid / sludge and leveling. (ii) Internal size of septic tank up to existing liquid depth will be measured for payment. (iii) The tenderer has to take cognizance of approach to septic tank and the length of hose pipe required for pumping the sewage. No extra claim what-so-ever arising shall be entertained on this account. The quoted rate shall deemed to include this aspect.

Cleaning of Septic tank/Soak well by taking out muck/sludge/silt/mud etc under any position including foul condition manually and disposing off the same in sealed tins to a distance exceeding 50m out side MD land complete all as specified and as directed.

Surface dressing around septic tank/filter bed, soak well within fencing n.exc 15 cm deep in hard/ dense soil including cleaning away all grass, vegetations, saplings, shrubs, bushes, weed under growth, roots, trees n.exc 30cm girth etc and removing rubbish to a distance 50m and depositing where directed complete all as directed by Engineer-In-Charge.

Excavation in trenches not exceeding 1.5 meter wide and not exc. 1.5 meter in deep not exceeding 10 sqm on plan and getting out in hard/dense soil.

All as per Item No.108 here in before but exc. 1.5 meter and not exc. 3.0 meter in deep, complete all as specified and as directed.

Returning, filling in, including spreading watering and well ramming in layers not exc 25cm thick in hard/dense soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50m & depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

Demolition of Brick work or PCC solid block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings dressed stone work and pre-cast concrete articles.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for cover slabs and similar work all as specified.

Material and labour for Plain Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate for foundation filling and mass concreting.

Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 40 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour for providing plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in benching, edging, chamfering, etc complete all as specified and directed

Extra for forming fair finished channel or drain 30cm inner girth in cement concrete using extra cement including mitered/stopped ends, forms mould etc, complete all as specified and directed

Material and labour for providing plain cement concrete 1:3:6 type C0 using 12.5 mm graded stone aggregate as in bed blocks/coping etc including necessary form work all as specified.

Material and labour for providing precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for cover slab set in CM 1:4 including necessary form work.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 15mm thick on fair faces of brick work/concrete surfaces in cement mortar 1:4 mixed with approved water proofing compound finished even and smooth with out using extra cement. Note :- Supply only of water proofing compound will be measured and paid separately where required.

Supply only of liquid based water proofing compound

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking bending spirally for handle, rungs and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, as in cover slabs all as specified and as directed by engineer-in-charge.

Demolition and breaking up 150mm dia SWG drain pipe set in cement mortar complete all as specified and as directed by Engineer-in-Charge.

Material and labour, for Salt glazed stoneware pipes of 150 mm dia (internal diameter) grade 'A' laid in trenches and jointed and tested as specified and as directed by Engineer-in-Charge.

Material and labour for Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid & tested as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete type B1, 1:2:4, smooth finished, and reforming benching as required for 150 mm internal dia.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete type B1, 1:2:4, smooth finished, and reforming benching as required for 100 mm internal dia.

Supply and fixing in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc. complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR), type 'B' pipes, single socketed in any length with rubber joints laid in trenches, complete all as specified and directed

S&F in repairs 75 mm dia PVC (SWR), type 'B' pipes, single socketed in any length with rubber joints laid in trenches, complete all as specified and directed

S&F in repairs PVC (SWR) bends 110mm dia any radius with access door complete all as specified and directed

S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for Plain cement concrete 100 mm thick 1:3:6 type C2 (20mm graded stone aggregate) as in sub base complete all as specified and directed.

Material and labour for Plain cement concrete 100mm thick 1:2:4 type B1 (20mm graded stone aggregate) and complete all as specified and directed.

Material & labour for Machine pressed precast concrete interlocking paver blocks/tiles , any shape & size with grey cement and pigment confirming to IS-15658-2006 of 60 mm thickness, M-35 grade over 50 mm thick sand cushion complete all as specified and directed , complete all as specified and as directed. (Note: Quoted rate shall deemed to include for 50 mm thick Sand cushion)

Material & labour for Machine pressed precast concrete interlocking paver blocks/tiles , any shape & size with grey cement and pigment confirming to IS-15658-2006 of 80 mm thickness, M-40 grade over 50 mm thick sand cushion complete all as specified and directed , complete all as specified and as directed. (Note: Quoted rate shall deemed to include for 50 mm thick Sand cushion)

Material and labour for Non skid heavy duty tile 400x400x10mm thick Coloured jointed free in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match and including 15mm thick screed bed layer in CM (1:4) etc complete all as specified and as directed.

SAYED MUSTAQ AHMED (BID ID -3474053)

Aditya Enterprises (BID ID -3474027)

M/s.Santosh Kotarki (BID ID -3472760)

Siddique constructions (BID ID -3473373)