Special Repair Work in Work Shop, Hospital and Administrative office at Bilodara Jail Nadiad Dist- Kheda (Including Electrification)

Name of Work : Special Repair Work in Work Shop, Hospital and Administrative office at Bilodara Jail Nadiad Dist-Kheda (Including Electrification)

SOR 2024 -25 [KHEDA]

Statement showing the approximate quantities for items of the above work to be carried out of Rs.

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

1 Dismentaling tiled of stone floors laid in mortar including stacking of 910.00 Smt 46.31 RS: Forty Six and

serviceable materilas and disposal of unserviceable materials with all lead and lift. Paise Thirty One only

2 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including 225.00 Each 181.13 RS: One Hundred

chowkhats architraves, holdfasts and other attachment etc. complete and stacking Eighty One and Paise

them within all lead and lift.(ii) Not Exceeding 3 Sq.M. in area. Thirteen only

3 Credit value for old window shutter of fully glazed and removed from site and 170.00 No -50.00 RS: Mines Fifty only -8500.00

4 Removing and Scraping of old deteriorated Plaster of Any thickness From 400.00 Smt 18.75 RS: Eighteen and

Wall / R.C.C member including stacking of serviceable materials and disposal of Paise Seventy Five only

unserviceable from site with all lead and lift

5 Removing dry or oil bound distemper by a washing and scraping and sand 3,650.00 Smt 10.88 RS: Ten and Paise

papering the wall surface smooth including necessary repairs to scratches Eighty Eight only

6 FILLING in plinth with SAND under floors including watering, raming consolidating 55.00 Cmt 455.63 RS: Four Hundred Fifty

and dressing etc. complete. As per instruction of Engineer In-Charge. Five and Paise Sixty Three

7 Applying general insecticide pest control treatment to floors, cupboards etc 535.00 Smt 88.40 RS: Eighty Eight and

including labour material etc. complete. Using Heptachloride 20 EC. As Per Paise Forty only

6113_pests Consentration Weight 0.50 percent is recommended one litre

chemical emulsion dillute with 39 liter of water will give. Total dillute concrentration

will be 40 litre inclusive of one litre chemical emulsion appication 0.5 Litre

chemical / Sqm of surface is recommended as per I.S

8 Providing & laying Cement Concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 40.00 Cmt 2492.51 RS: Two Thousand Four

graded stone aggrigates of 40 mm nominal size) curing with etc complete Hundred Ninty Two and

inculuding cost of formwork in FOUNDATION AND PLINTH. Paise Fifty One only

9 Providing & laying Controlled Cement Concrete M 150 and curing complete 54.04 Cmt 3942.50 RS: Three Thousand

including cost of Formwork of Plywood only with fair finish so as to give fair finish Nine Hundred Forty Two and

and Excluding cost of reinforcement for reinforced concrete work in foundation & Paise Fifty only

plinth. Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

10 Providing TMT Bars Fe -500D reinforcement for RCC work including cutting, 2,500.00 Kg 75.46 RS: Seventy Five and

bending, binding and placing in position etc.complete for all floors. (Brand As Paise Forty Six only

Approved By GSPHC)

11 Providing and Laying 25mm Thick Mirror Polished Stone Diamond cut & 511.00 Smt 1078.70 RS: One Thousand Ten

Green colour Kota Stone Flooring over avrege 20mm thick base of cement Hundred Seventy Eight and

mortar 1 : 6 (1-Cement : 6-Coarse Sand) laid over and jointed with grey cement Paise Seventy only

slurry including Rubbing and Polishing etc. Complete. All Kota stone edges Shall

be Hand Cut,Machine Cut shall not be Allowed & etc Complete For All Floors

12 Providing and Laying 25mm Thick Mirror Polished Diamond cut & Green 20.00 Smt 1215.70 RS: One Thousand Two

colour kota stone in risers of steps,dedo,Skirtings and pillars laid on 10mm Hundred Fifteen and Paise

thick base of cement mortar 1 : 3 (1-Cement :3-Coarse Sand) and jointed with Seventy only

grey cement slurry mixed with pigment to match the shad of slab including

Rubbing and Polishing etc. Complete for ALL FLOORS., Flooring pattern shall be

as per Approved Drawing

13 Provinding & laying Printed Coloured 600mm x 300mm size GLAZED TILES 20.00 Smt 1403.33 RS: One Thousand Four

8mm thick in skirting, risers of steps and DADO on 10mm thick cement Hundred Three and Paise

plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed with color cement slurry Thirty Three only

including finished with flush pointing & cleaning the surface etc Complete for all

Floors. Material shall be used as per approved make list by GSPHCLsize & shade

shall be as per apporoved Drawing or as per Direction Of Engineer in Charge...

14 Provinding and laying inegrated cement based proofing treatment of required 420.00 Smt 929.50 RS: Nine Hundred

thickness over the roof including 10mm thick waterproofing cement plaster in Twenty Nine and Paise Fifty

cement plaster in cement mortar1:3 and chaina mosaic fitting and finally finishing only

the surfase with white cement slurry and slopping out taerrace slabs with following

specification laid to required slope not flatter than 1:80 ( the thickness of water

proofing treatment near........

............... rainwater outlet or the lowest point of the finishedslope shall not be less

then 45mm, including treating the vertical surfaseof the parapet wall up to 20cms .

height above finished level of terracing including finishing the top with joint less

water proofing plaster , curing , testing etc. complete. Rate is including ten years

performance of guarantee bond to be given on stamp paper. (No extra shall be

paid for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm. of

cement admixed with properly water proofing compound conforming to IS -2645

and 10 mm thick water proofing cement plaster in Cement mortar 1:3 over the

R.C.C.slab incl. cleaning the surface before treatment

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size with

50% of cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick water

proofing cement plaster in cement mortar 1:3 (1 cement ,3 coarse sand) admixed

with proprietary water proofing compound conforming to IS 2645 to required slope

and treating similarly the adjoining walls up to 200mm height incl. rounding of

junction of walls.

C) After Two Days of proper curing applying a second floor of cement slurry

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint less

cement plaster of mix 1:3(1 cement :3 coarse sand )admixed with proprietary

water proofing compound conforming to IS :2645 and finally finishing the surface

with trowel with neat cement slurry

(E) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curring for final taste

All above operation to be done in order and as directed and specified by the

Engineer In Charge.

15 BRICK WORK using common burnt clay building bricks having crushing strength 50.00 Cmt 4246.86 RS: Four Thousand Two

not less than 35 Kg./Sq cm. In super structure above plinth level. Conventional Hundred Forty Six and Paise

bricks in cement moratar 1 : 6 ( 1 cement : 6 coarse sand) for GROUND FLOOR Eighty Six only

16 Providing and Fixing Granite Telephonic Black Colour 18 mm thick for jambs 186.93 Smt 2428.00 RS: Two Thousand Four

and sills of doors & windows using neat cement slurry laid over 20 mm average Hundred Twenty Eight

base of cement mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement only

slurry including racking(Tancha Work) rubbing and polishing,scaffoldings,tools and

tackles,scaffolding etc. complete(with base of neat cement) as per direction of

Engineer in charge including fully rounding the exposed edges as directed.

17 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete 420.00 Smt 219.41 RS: Two Hundred

wall for interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 Ninteen and Paise Forty

sand ) including finishing with floating coat of neat cement slurry at GROUND One only

18 Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground 395.00 Smt 332.33 RS: Three Hundred

level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and Thirty Two and Paise Thirty

8mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any Three only

height.sand faced Plaster Shall Be Carried Out By Using (only Gutaka)

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

19 Providing and fixing Alluminium section window having extruded Aluminum Colour 265.00 Smt 1568.27 RS: One Thousand Five

anodized section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Hundred Sixty Eight and

Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm @ Paise Twenty Seven only

Wt.1.07 Kg/mt, vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @

wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per detailsetc. complete for window. for ALL FLOORS.

20 Providing and fixing standard extruded of Alluminium section of size 63mm x 30.00 Smt 1163.92 RS: One Thousand One

38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for Hundred Sixty Three and

ventilation with 5 mm thick frosted glass as details etc complete for Ventilation. Paise Ninty Two only

for ALL FLOORS.

21 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door 32.00 Smt 11082.31 RS: Eleven Thousand

Shutter with 1mm Thick Laminates on Both Side of Shutter. Making / Construction Eighty Two and Paise Thirty

of Flush Door is with Pine or southern Yellow Pine Filler and 2.5mm core veneer One only

Both Side and 0.4mm Face Veneer on Both Side with Lock rail on Center. Flush

Door Provide with Teak wood beading patti (32mm X 12mm) on Peripheries of

Flush Door with Door Frame of Non Teak Solid Wood of size 150mm x 70mm

with Chemically ............

...............Treated and Seasoned Including Paint Matching with Laminates. Frame

& Flush door shutter having 5 year warranty against attack of biological agent like

termite, borers, decay, fungi and harmful insects also warranty against seasoning

related issues like crack, bending, twisting, warping. Laminates on shutter shall be

press by cold press method. Shutter shall be brought to site in packed PVC bags

& pvc coating shall be removed on completion of work in such a way that shutter &

Frame is free from nail mark & any damages etc..........

......Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold

Fast (25mm X 5mm) & 8 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm

thick, required Screw & Nails per Frame and Fixing following S.S. Fixtures And

Fastening. (1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm

Long, (3) Double Leg Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm

Long X 10mm thick. Door are Fixing as per Details Drawing & Instruction of

Engineer in charge. All Materials Used Shall be as Per approved Material Make

List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

22 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door 32.00 Smt 8399.74 RS: Eight Thousand

Shutter with 1mm Thick Laminates on Both Side of Shutter. Making / Construction Three Hundred Ninty Nine

of Flush Door is with Pine or southern Yellow Pine Filler and 2.5mm core veneer and Paise Seventy Four

Both Side and 0.4mm Face Veneer on Both Side with Lock rail on Center. Flush only

Door Provide with Teak wood beading patti (32mm X 12mm) on Peripheries of

Flush Door with Door Frame of Non Teak Solid Wood of size 100mm x 60mm

with Chemically.......

......... Treated and Seasoned Including Paint Matching with Laminates. Frame &

Flush door shutter having 5 year warranty against attack of biological agent like

termite, borers, decay, fungi and harmful insects also warranty against seasoning

related issues like crack, bending, twisting, warping. Laminates on shutter shall be

press by cold press method. Shutter shall be brought to site in packed PVC bags

& pvc coating shall be removed on completion of work in such a way that shutter &

Frame is free from nail mark & any damages etc....

....Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold Fast

(25mm X 5mm) & 4 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick,

required Screw & Nails per Frame and Fixing following S.S. Fixtures And

Fastening. (1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No,

100mm Long, (3) Double Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No,

150mm Long X 10mm thick. Door are Fixing as per Details Drawing & Instruction

of Engineer in charge. All Materials Used Shall be as Per approved Material Make

List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog

23 Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern 6,950.00 Kg 74.94 RS: Seventy Four and

fabricated from M.S. flat,square bars, round bars,c-channel, square/round box Paise Ninty Four only

pipe as per detail Drawings. Rate is inclusive of welding with grinding smooth

surface, two coats of Oil paint and one coat of yellow Zinc primer coat of

approved brand only. Oil paint shall be used as per Approved Material List By

G.S.P.H.C the Structural Steel Shall be used only ISI mark only.

24 Providing & Fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS- 175.00 Rmt 314.52 RS: Three Hundred

13592 of 90mm Dia Complete with GI Slotted " Z " Patti ( minimum 1.60mm thick ) Fourteen and Paise Fifty

with minimum 6mm dia U Clamp and including making good the ceiling and floor Two only

on terrace rain water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical

pipe and 90mm bend at the end near by Ground level rate are Inclusive of all

Necessary Fittings required. pipe As Per approved Material List By G.S.P.H.C .

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

25 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop 370.00 Smt 188.49 RS: One Hundred

Surface (two coats) to give an required shap even shade after throughly Eighty Eight and Paise

brushing the surface to remove all dirt and remains of loose poweder material etc. Forty Nine only

complete. Rate are inclusive of applying two coat of lapy (Putty) and one coat of

primer on new Ceilling/Slop Surface to give and even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and sand

papered smooth. Fine Putty primers and Plastic Emulsion Paint Shall Be Used

As Per approved Material List By G.S.P.H.C

26 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to 1,660.00 Smt 176.01 RS: One Hundred

give an required shap even shade after throughly brushing the surface to remove Seventy Six and Paise One

all dirt and remains of loose poweder material etc. complete. Rate are inclusive of only

applying two coat of lapy (Putty) and one coat of primer on new wall surface to

give and even shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.primers,Putty and

Plastic Emulsion Paint Shall Be Used As Per approved Material List By G.S.P.H.C

27 Finishing wall with weather proof exterior emulsion paint on wall surface (two 1,650.00 Smt 147.68 RS: One Hundred Forty

coats) over and above applying One Coat Of Primer to give an required shape Seven and Paise Sixty Eight

even shade after thoroughly brushing the surface to remove all dirt, and remains only

of loose powdered materials.etc complete.primers and exterior Emulsion Paint

Shall Be Used As Per approved Material List By G.S.P.H.C

[A] Civil Amount

28A Providing & erecting Point wiring with approved ISI marked 1.1 KV grade 2 X 1.5 130.00 Point 445.00 RS: Four Hundred Forty

sq.mm. copper PVC insulted FRLS wire with 1.5 sq.mm. (green) copper PVC Five only

insulated FRLS wire for earth continuity in FIA approved ISI mark medium class

white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution erected flushed on wall / ceiling along with continuous G.I. fish

wire to draw wires complete with approved make 5/6 Amp. ISI............

............. mark modular type switch and accessories mounted in 20 G. G.I.

company fabricated metallic / PVC / Acrylic box covered with appropriate front

plate modules erected flushed on wall / ceiling with necessary modular lamp

holder / modular ceiling rose / HD Connector as directed for open wiring (a) Light

point. Cat.-III OPEN WIRING (Make & Model approved by EIC & matching color

with switch accessories.)

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

Length of point wiring must not increase than 10 mtr. For that necessary switch

boards and their locations must be finalised before execution by agency otherwise

payment will not be done for extra long point. (For future extention, if required,

agency has to erect one higher size metal box and modular plate as per

instruction of EIC. Cost of blank plate shall be paid as per tender item) [This item

include cleaning (inside/outside) of all G.I. switch boards, electric point box, fan

box, MCBDB & box cutting plaster finishing for modular plate without any

gap](Conductor resistance should be as per IS:8130/1984)

28B For Fan Point (with 6 A. Modular type switch and two module hum free EME Five 55.00 Point 632.00 RS: Six Hundred Thirty

or more step type electronic fan regulator both having ISI mark) Cat.-III Two only

28C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) 20.00 Point 471.00 RS: Four Hundred

Cat.-III Seventy One only

28D For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI 70.00 Point 255.00 RS: Two Hundred Fifty

mark ) Cat.-III Five only

29A Providing and erecting Medium Class FIA approved and ISI mark white colour 950.00 Mtr. 24.00 RS: Twenty Four

(embossed) RIGID PVC PIPES of following size complete erected with necessary only

PVC fittings & Junction boxes fixed with adhesive solution & clamps on / in wall /

ceiling along with continuous fish wire to draw mains with necessary fittings and

junction boxes for following dia. (a) 20 mm. dia.

29B For 25 mm. dia. 350.00 Mtr. 33.00 RS: Thirty Three

30A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV 1,200.00 Mtr. 46.00 RS: Forty Six only

grade In Existing FIA approved ISI mark medium class embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution to be erected on/in brick wall / slab

along with continuous G. I. fish wire to draw mains laid in approved manner........

............. with plastering by cement mortar & finishing the surface to match the wall

/ ceiling complete with FRLS PVC insulated wire for earth continuity. (Approved ISI

make only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains with

1.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard

colour code. [conductor resistance should be as per IS:8130/1984]

30B For 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. 150.00 Mtr. 62.00 RS: Sixty Two only

FRLS copper multi stranded conductor for earthing as per standard colour code.

[Wire must be having box packing] (Conductor resistance should be as per

IS:8130/1984 )(For Computer Point)(In Existing Pipe)

30C For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. 450.00 Mtr. 120.00 RS: One Hundred

FRLS copper multi stranded conductor for earthing as per standard colour code. Twenty only

[Wire must be having box packing] (Conductor resistance should be as per

IS:8130/1984 ) (In Existing Pipe)

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

31 For 4 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. 400.00 Mtr. 238.00 RS: Two Hundred Thirty

FRLS copper multi stranded conductor for earthing as per standard colour code. Eight only

[Wire must be having box packing] (Conductor resistance should be as per

IS:8130/1984 ) (In Existing Pipe)

32 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with 150.00 Mtr. 37.00 RS: Thirty Seven

necessary socket, PVC bushes saddle, Check-nuts etc. complete of following only

33 Providing following type of Modular Type Accessories mounted with PVC / 50.00 Each 25.00 RS: Twenty Five

metallic/Wooden box, single mounting base frame covered with textured / only

metallic/white front plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. For Blank Plate Single Cat III

34 Providing & Erecting Plug Point wiring with 1.1 KV grade ISI marked approved 21.00 Each 526.00 RS: Five Hundred

make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) Twenty Six only

copper PVC insulated FRLS wire for earth continuity in Exisitng FIA approved ISI

mark white colour medium class 20/25 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution erected on/in brick........

.............. wall/slab along with heavy duty GI pressure shaddle and laid in

approved manner for PVC pipe & boxes with 16 Amp Modular type Swich and

accessories mounted in 20 G. GI company fabricated metallic/ PVC box covered

with appropriate front plate modules erected flushed with wall. (a) 16 A indicator

switch & 1 No. 6/16 A universal socket suitable for 3 pin top duly both having ISI

mark . Cat-III(in Exisitng Pipe)

35A Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 6.00 Each 7025.00 RS: Seven Thousand

225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology Twenty Five only

earthing.Earthing electric rod must be made from Corrosion free Hot dip

galvanizing pipes having following specification.

(A)(A) Earthing Electrode: outerpipe:- 88mm minimum O.D ,ISI 'B ' Class ISI mark

............ Reputed Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class ISI mark

reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should be made

from inner pipe for that pipe must be pressed and gave rectangular shape so its

work as a terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any where. SS Nut

bolt:- 2 no.with washer suitable for 14mm dia. hole must be..........

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

........... provided at terminal. total minimum Weight(approx.) of earth electrodewith

inside conductive material minimum should be 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

(C) Back fill Compound :-Earthing compound should be capable to retain moisture

for long time Back Filling Compound weight is 25 Kg. Necessary test report must

(D) Chamber and cover :-Earthing chamber should be size of

400mmX400mmX400mm depth and Cover should be heavy duty cast iron with

required size of 300mmX300mmX4mm thick.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip ........

.............galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model to be approved by EIC) OEM has to submit all detail & sample for

approved before supplying

Water must be poured in bore before starting earthing. Earthing value must be

measured ............

.............with earth tester. Agency has to bring the earth resistance to at least

ohms & voltage between neutral &Earthingupto 02 volt. Agency has to maintain

earthing& its value for one year. If required. Earthing must be done in the

presence of A.E (GSPHCL)

35B For above earthing additional charges for boring in hard rock soil (by breaker) & 6.00 Each 276.00 RS: Two Hundred

filling soft soil in earth pit (certificate for soil have to given by DEE / AE along with Seventy Six only

36 Supplying and erecting 8W led lamps with following wattage capacity of 220 to 240 20.00 Each 111.00 RS: One Hundred

voltage, minimum 15000 burning hours life, 500 V in built-surge Eleven only

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 LED Lamps integral type, with PC diffuser suitable LAMP

37 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of 80.00 Each 370.00 RS: Three Hundred

wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a heat Seventy only

sink shall be made from Aluminum extrusion having enough strength (sample

must be approved by EIC)with polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated .........

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

.............input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

(J) Driver .........

.......Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing clamp design & strength should be sufficient to hold the fitting erected

on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to

submit 5 yrs free replacement Guarantee for complete Fixture) [Approval will be

given strictly subject to item specification]

38 SITC Of 36Watt LED Indoor Commercial make high efficiency performance lamp 20.00 Each 530.00 RS: Five Hundred Thirty

with combination of high quality diffused polycarbonate and alluminium base only

dedicated heat sink for better perfomance of LED and also long life.High quality

LED must be placed on metal core printed circuit board for better heat dissipation.

seprate driver with all protection like under voltage( 90 to 240),..........

............over voltage protection 2 KV surge protection.The life of lamp should have

25,000 hrs at L70 ,THD<15% efficiency >90lm/w, with high power factor >0.90

with CRI > 80 , for better color rendition.total lumens should be min 2160.The

lamp should be suitable for T8 box type fitting made form CRCA sheet and white

powder coated.The data sheet of LM79 for complete lamp can also be provided.(

LT make, Phillips Make, GRE make ,Havells,Pyrotech, .........

.............Orient,Ensave make and model) Aprooved by EIC as per Specification

Note:-The manufacturer/ authorised Channel partner of the manufacturer has to

submit 5 yr free replcement Guarantee for complete Fixture ) Approval will be

given strictly subject to item specification. .Fitting Must be Erected With required

size of PVC Buffers directed by EIC.

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

39 providing and erecting Polycarbonate body surface mounting LED Bulk head type 4.00 Each 780.00 RS: Seven Hundred

9 watt Lighting Fitting with electronic driver having THD<15% ,CRI>80,P.F.>0.95 Eighty only

And lumen output from luminaire 800lm , IP 54 protection ,input voltage range 90-

300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver having THD > 80lm/w., -

20degC to +60degC working temperature, AL frame with Beam Angle 120deg.

40 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 55.00 Each 1929.00 RS: One Thousand Nine

6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: Hundred Twenty Nine

1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power only

Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service value:min

m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty.........

.......... premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high

grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: Min.

1.5 MFD (15% Tolerence) as per IS:1709-1984, (14) Down road: up to 1.0 mtr as

per site requirment, (15) Required fixing accessories, ........

...........(16) 3 core 0.75 sq.mm ISI wire as per site requirment, (17) No vibration

and noise due to mechanical parts. (18) Safety wire provided by manufacturer with

ceiling fan. (Agency has to erect safey wire with ceiling fan and checked with EIC)

(OEM has to approved model as per tender specification and tested at ERDA)

41 Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe /M.S. Pipe 10.00 Rn. Mtr. 107.00 RS: One Hundred

down rod erected duly painted for fan complete with necessary 24/0.2 flat 3 core Seven only

flexible cable with earthing.The Down rod thickness,hole,locking

arrangement,construction,power coating,colour shed should be same as original

down rod brought with ceiling fan.For that agency has to give original down road

sample to fabricator and one sample down rod should be approved with EIC .After

approval given by EIC agency can use the down rod as per approved sample.If

without approval down rod will be erect on site,agency has to replace them with

42 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & 70.00 Each 98.00 RS: Ninty Eight

Nuts erected with necessary hook of 10 mm M.S. Round Bar. only

43 Providing ad erecting approved make Three phase Single Door Horizontal / 1.00 Each 2421.00 RS: Two Thousand Four

Vertical type (as per site requirement and EIC instruction) outgoing per phase Hundred Twenty One

outgoing type (PPI) metal clad D.B. as per relevant indian standards ammended only

Supplying and fixing following way Three phase MCB distrubution board with

company wire links for internal connections having colour code and with suitable

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

............and company fabricated IK 10 certificate with sheet box with powder

coated inside and outside after apply seven tank chemical process of MS sheet

cover complete with suitable integral single piece construction, tinned copper

busbar and link with all necessary interconnection and with necessary size GI

frame (if required for surfacetype) for mounting MCBDB. Manufacturer must be

provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 ............

.........having D type PU gasket. (2) Seven tank Powder coating Certificate (3)

Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting

Cover for 440 Volts on surface / recess complete with loose wire box, terminal

connectors for all incoming and outgoing circuits, with suitable size FRLS PVC

10mm2 insulated copper conductor with pin type lugs up to terminal blocks ........

...........and internal connection, tinned coppper bus bar, 4 nos. tinned copper

neutral link, 4 nos. tinned copper earth bar, din bar-4 nos., detachable gland plate,

interconnections, powder painted including earthing etc. Three phase incoming

and single phase outgoing. total quantity of wire link :13 nos.

For Three phase 8 Way Single Door PPI MCBDB (The DBs should be used of

same company of MCB / ELCB to be used) (MCBDB must be erected in line &

level with spirit level ) (Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box done with red colour

radium sticker as per site requirement and instructions given by EIC on site. Font /

number size given by EIC on site as per requirement] (If Required)

44 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 2.00 Each 1172.00 RS: One Thousand One

having 10KA breaking capacity & confirms to IS :8828 with same company metal Hundred Seventy Two

box with earthing terminal having following capacity with necessary Numbering only

with oil Paint by painter. [c] 63 Amp. (Three Phase DB)

45 Providing & erecting 240 V MCB Double pole switch for Motor and inductive load 12.00 Each 327.00 RS: Three Hundred

(C curve) having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. Twenty Seven only

box having following capacity. For 40 Amp DP. (Three Phase DB)

46 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 3.00 Sq. Mtr. 2289.00 RS: Two Thousand Two

25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP Hundred Eighty Nine

SWITCH and energy meter (contractor shall make approved drawing of Bakelite only

sheet To arrange required No. of Energy meter & ICDP switch -busbar etc. as per

Actual space available in electrical room at site)

47 Providing and erecting metallic vitrified danger notice board as per language 3.00 Each 69.00 RS: Sixty Nine only

suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected

as per IS-2551.

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

48A Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium 400.00 Mtr 282.00 RS: Two Hundred

conductor cable for 1100 volt to be laid 90 cms. Under ground or to be laid on wall Eighty Two only

with suitable G.I. heavy guage 1.0mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor.(a) For 3*1/2 core 50 Sq. mm (25 Sq.

mm * 1/2 core)(Main Panel to Police Station Panel)

48B 4 core 25 Sq. mm(Main Factory Panel to Sub Panel Factory Room) 100.00 Mtr. 189.00 RS: One Hundred

Eighty Nine only

48C For 4 core 16 Sq. Mm(if Required) 50.00 Mtr 152.00 RS: One Hundred Fifty

48D 4 core 10 Sq. mm(Section Piller to Hospital) 60.00 Mtr 139.00 RS: One Hundred Thirty

49 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable 400.00 Mtr 361.00 RS: Three Hundred

for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. Sixty One only

heavy guage 1.0mm thick cable clamp or in existing DWC pipe underground or

road crossing or floor. (a) For 4 core x 4 sq.mm. (For 3 Phase Machine)

50 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 250.00 Mtr 213.00 RS: Two Hundred

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in Thirteen only

existing trench / pipe at road crossing or floor of following size of cable.(A) 3 core

51A Providing & fixing double compressed heavy duty flange type brass cable gland 10.00 Each 75.00 RS: Seventy Five

with rubber ring for P V C insulated armoured cable complete with outgoing tails, only

insulating tape etc. For following size cables. For 2 to 4 core x 50 Sq. mm (Sigma,

MCI, Comet Make Only)

51B For 2 to 4 core x 25 Sq. mm (Sigma, MCI, Comet Make Only) 10.00 Each 66.00 RS: Sixty Six only

51C For 4 core 16 Sq. mm (Sigma, MCI, Comet Make Only) 10.00 Each 57.00 RS: Fifty Seven

51D For 10 Sq. mm (Sigma, MCI, Comet Make Only) 8.00 Each 48.00 RS: Forty Eight

51E For 4 core 4/6 Sq. mm 50.00 Each 48.00 RS: Forty Eight

52A Solderless crimping type alluminium lugs conforming to IS suitable for cable of 50.00 Each 20.00 RS: Twenty only

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. [a]

52B For 16/25 Sq.mm 80.00 Each 15.00 RS: Fifteen only

52C For 10 Sq.mm 12.00 Each 13.00 RS: Thirteen only

53A Solder less crimping type Copper lugs conforming to IS suitable for cable of 300.00 Each 8.00 RS: Eight only

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/2.5

53B (B) 10 Sq.mm 10.00 Each 9.00 RS: Nine only

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

53C (C) 16 Sq.mm. 16.00 Each 10.00 RS: Ten only

54A Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte multi 100.00 Mtr. 56.00 RS: Fifty Six only

stranded, annealed copper conductor with heat resistant PVC insulated conforms

to IS:694, IEC - 227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required. For One wire 6.00 Sq.mm

(Conductor resistance should be as per IS:8130/1984 )

54B [f] One wire 10.00 sq. mm (Conductor resistance should be as per IS:8130/1984 ) 100.00 Mtr 91.00 RS: Ninty One only

54C For One wire 16.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 200.00 Mtr. 141.00 RS: One Hundred Forty

55A Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to 255.00 Mtr. 117.00 RS: One Hundred

IS: 16205 (part 24) 2018)) with minimum load required of 450N capacity with anti Seventeen only

rodent and ultra violet material properties with necessary connecting accessories

of same material at required depth to be laid 90 cms. under ground for laying of

cable below ground / road surface for enclosing cable and back filling the same to

make ground as per original. (A)For Outer dia.50mm and Inner dia. 38mm (Test

Certificate to be Submitted)

55B For Outer dia.90mm and Inner dia. 75mm(Test Certificate to be Submitted) 300.00 Mtr 150.00 RS: One Hundred Fifty

56 Providing & erecting weather proof, dust & vermin proof, floor mounted front 7.00 Sq.mtr 16230.00 RS: Sixteen Thousand

operated indoor type cubical panel board having IP42 & above protection as per Two Hundred Thirty only

require made from 2 mm. thick CRC M.S. sheet for outer body & doors, 1.5 mm.

thick CRC M.S. sheet for internal partitions with necessary supporting angles, flats

including skirting, bending, drilling, welding, riveting with internal partitions & cable

alley as per requirements & instruction of engineer-In-Charge with erection of

supplied switchgears, busbars with suitable............

........... size of interconnecting PVC copper wire / Copper-Aluminium strips, rubber

gromets, rib, control wires, backelite control fuses, measuring instruments, earth

bus & earth bolts, foundation flange-bolts-base plates, sufficient nos. of hinged

doors, handle with locking arrangement, rubber gasket complete with Required

Nos. heavy Duty Connector. heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete.The ...........

.......panel shall be supplied with Seven Tank chemical process which shall be

carried out before applying painting, painted with powder coating. (The rates

excludes the cost of switchgears, busbars, interconnecting mains & Copper /

Aluminium strip, fuse, meters etc. The dimension shall be measured excluding

base beams) Factory inspection for verification of quality,workmanship .......

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

............and as per drawing & testing before dispatch the material as per tender

condition. The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory as per IEC 61439 and shall be certified

by that company whose switch gears are used after fabrication for beneficial use.

With 350 mm depth

Panel manufacturer have to give 3 years maintenance and service support if in

case of breakdown or fault. Panel manufacturer have to submit electrical meter

calibration report. Agency should design the panel in such a way that there should

not be any excess in panel area (sq.mtr) & length of bus bar (mtr), if any ........

........excess occurs draw attention to GSPHCL at the time of approval of G.A.

drawing. Loading and unloading of above item shall be done by hydra and skill

work force under supervision of electrical engineer and guidelines given by

manufacturer to avoid damage to the item. Picture of it to be submitted in running

bill / final bill.

Size of door and Ele. room / Pump room shall be checked by agency's engineer

.......... giving order. If found any problem in size discuss with GSPHCL engineer

for rectification before giving order. [Including Necessary numbering / marking on

PANEL done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on site as per

57 Providing & erecting Miniature circuit breaker single pole 6 Amp. to 32 Amp. 8.00 Each 111.00 RS: One Hundred

suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to Eleven only

be erected in existing box. confirming to IS 8828/1996 with ISI Mark. (Main

Panel,Police Station Panel,Street light Terminal Box)(Spare)

58 Providing and erecting following additional parts for panel mounting MCCBs 10.00 Each 865.00 RS: Eight Hundred

(A)Extended operating rotary handle with pad lock with three position trip,off,on Sixty Five only

suitable for 25A to 250 A panel mounting cat-III(Company must be same company

59 Providing & Erecting Approved make Earth fault Relay suitable to mount with inter 2.00 Each 4934.00 RS: Four Thousand Nine

connection to moulded case circuit breaker having CT ratio & MCCB rating as Hundred Thirty Four only

following along with shunt trip 220 V AC with all internal connections & complete

erected in existing M.S.housing. For 125 A - 200 A, CT Ratio 1/200(For Police

Station Panel,Main Panel)

60 Supplying, erecting, testing and commissioning of approved make panel mounting 2.00 Each 1263.00 RS: One Thousand Two

type Digital Voltmeter having 3 digits LED display 0 to 750 AC Volts range having Hundred Sixty Three

0.5 Class accuracy erected on existing panel board with all connection, wiring ete., only

with manufacturers calibration certificate.

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

61 Supplying, erecting, testing and commissioning of approved make panel mounting 2.00 Each 1543.00 RS: One Thousand Five

type Digital Ammeter having 3 digits LED display, external CT operated, calibrated Hundred Forty Three

for 0 to 400 Amps. suitable to operate on 500 volt AC having 0.5 Class accuracy only

erected on existing panel board with all connection wiring ete., with manufacturers

calibration certificate.

62 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 4.00 Each 314.00 RS: Three Hundred

Supply 500 V on existing panel board with necessary connections. Fourteen only

63 Supplying and erecting approved make set of indicator lamps of LED type lamp, 9.00 Each 43.00 RS: Forty Three

lense cover, Bakelite holder complete erected with necessary connections. only

64 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 7.00 Each 272.00 RS: Two Hundred

ratio 15 VA burden havong 0.5 class accuracy erected in existing CRCA box duly Seventy Two only

secured with insulating materials connected to the meter

65 Providing and erecting Steel cover as per drawing using 16 SWG M.S.sheet of 18.00 Sq.Mtr. 2976.00 RS: Two Thousand Nine

following depth, to house the switchgear etc. complete with locking arrangement Hundred Seventy Six

and lock with duplicate keys per cupboard and door handles erected with only

necessary support and painting. Without angle iron frame [b] For 40 cms. depth

66 Supply, Installation, Testing & Commissioning of Three Phase, 440 V Surge 1.00 Each 6318.00 RS: Six Thousand Three

Suppressor protection Device (SPD) & 40 Amp. TPN MCB (or as per SPD OEM Hundred Eighteen only

guideline for the protection of SPD which is erected such a way that it can be

operated easily) SPD Must be Capable to Protect all electrical and electronic

equipments. The Detail Specification are As per Attached sheet with Annexture -A

(Hakel, Iskira,OBO make) (With Five year Gaurantee / Warranty)

67A Supplying & erecting tripple pole & neutral 440 / 500 V panel mounting Copper 3.00 Rn. mtr. 1942.00 RS: One Thousand Nine

busbars with four equal nos. of electrolyte bars duly wraped with colour insulating Hundred Forty Two only

tape for phase awquence of following current carrying capacity, erected with

necessarybusbar supports / insulators, main cable socket to each bar, erected in

existing cubical pannel with necessary incoming & outgoing connections with

proper size of Copper, wires or strip with lugs as directed.For electrolyte copper

busbars Suitable for 100 Amp. capacity

67B Suitable for 200 Amp. 3.50 Rn. mtr. 3171.00 RS: Three Thousand One

Hundred Seventy One

67C Suitable for 300 Amp. 3.00 Rn. mtr. 4861.00 RS: Four Thousand

Eight Hundred Sixty One

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

68 Providing and erecting Approved make Four pole moulded case circuit breaker 2.00 Each 16061.00 RS: Sixteen Thousand

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating Sixty One only

200A.with variable Thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S.housing

69 Providing and erecting Approved make Four pole moulded case circuit breaker 1.00 Each 17667.00 RS: Seventeen

with solid seperate neutral link having breaking capacity ICU of 35 KA. at 415 V. Thousand Six Hundred Sixty

having Normal current rating 200A.with variable Thermal & magnetic release Seven only

suitable to work on A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected with 16 G.M.S.housing ( If Required)

70 Providing & Erecting Approved make Four pole moulded case circuit breaker 3.00 Each 7976.00 RS: Seven Thousand

with solid seperate neutral link having breaking capacity ICU of 35 K.A. at 415 V. Nine Hundred Seventy Six

having normal current rating 125 Amp with Variable thermal & magnetic release only

suitable to work on A.C.supply 50 c/s. with all internal connections & complete

erected with 16 G.M.S. housing. ICS=100% of ICU only (For Main Panel and

Sub Panel panel Right Ahnd Side )

71 Providing & Erecting Approved make Four pole moulded case circuit breaker with 6.00 Each 6112.00 RS: Six Thousand One

solid seperate neutral link having breaking capacity ICU of 35 K.A. at 415 V. Hundred Twelve only

having normal current rating up to 25 A to 100 A Amp with Variable thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections & complete erected with 16 G.M.S. housing. ICS=100% of ICU only

Cat III (For Main Panel and Sub Panel Left Hand Side and Some Sapre oi main

72 Providing & erecting 240 V MCB Double pole switch for Motor and inductive load 22.00 Each 327.00 RS: Three Hundred

(C curve) having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. Twenty Seven only

box having following capacity. For 40 Amp. Cat:-III (in Sub Panel Right Hand

Side 12+ Left Hand Side 4 Nos and Main Panel 3 Nos

73 Providing and erecting 240 volt MCB double pole switch for motor & inductive load 13.00 Each 599.00 RS: Five Hundred Ninty

(C Curve) having 10 KA Breaking capacity and confirms to IS : 8828 with same Nine only

company Metal box with earthing terminal having following capacity. with

necessary quarter Numbering with oil paint by Painter. (a) 40 Amp Capacity.

Cat-II(on Wall For Single Phase SupplY

74 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 19.00 Each 730.00 RS: Seven Hundred

having 10KA breaking capacity & confirms to IS :8828 in existing box having Thirty only

following capacity 63 Amp (in Main Panel + Spare

75 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 17.00 Each 1172.00 RS: One Thousand One

having 10KA breaking capacity & confirms to IS :8828 in with Same Metal Box Hundred Seventy Two

box having following capacity 63 Amp( On Wall Three Phase Supply only

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

76 Providing ad erecting approved make single phase Single Door metal clad D.B. as 5.00 Each 4901.00 RS: Four Thousand Nine

per relevant indian standards ammended upto date. Hundred One only

Supplying and fixing following way single phase MCB distrubution board of

company fabricated sheet box with powder coated inside and outside after apply

seven tank chemical process of CRCA sheet cover complete with suitable

integral..........

......... single piece construction tinned copper busbar and link with all necessary

interconnection and with necessary size MS frame for mounting MCBDB. MCBDB

Door, Back side and Body of MCBDB must be made of 1.2 mm thick CRCA Sheet.

Manufacturer must be provided (1) IP 43 and as per IS:8623-1 .......

........& 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder

coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete with loose

wire box, terminal connectors for all incoming and outgoing circuits...........

..............., with suitable size FRLS PVC insulated copper conductor up to terminal

blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper

neutral link, tinned copper earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing.

For 16 Way MCBDB: Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity of

10 KA), 1 no. MCB 40 Amp. double pole switch (C curve confirms to IS:8828

having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL

suitable to operate on 240 Volt A.C. power. (6 Amp:- 4 Nos.,.....

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB

must be erected in line & level with spirit level and finish the external edge with

box cutting plaster) (Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box done with red colour

radium sticker as per site requirement and instructions given by EIC on site. Font /

number size given by EIC on site as per requirement]

77 Drilling the road without breaking the road surface (Asphalt) for laying of cable for 58.00 Mtr 488.00 RS: Four Hundred

feeding power supply by making up to following size of holes at both ends Eighty Eight only

complete.(A) Up to 100 mm bore dia

78 Supplying & erecting IP 55 grade following size section pillar fabricated from joint 2.00 Each 3560.00 RS: Three Thousand

less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable Five Hundred Sixty only

clamps to be buried in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks work finishing with

plaster etc. hinged double door internally supported ..........

Item TOTAL Rate TOTAL

Description Unit Rate In Word

QTY Figure Amount

........on both side, with internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other

with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside and

out side with three tank powder coated paint. section pillar roof should be .......

..........without joint with water leakage proof & tested as per IP 55 test & followed

by IS 2147 of 1962A) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS

angle..(if Required Behind Hospital)

79 carry out RCC Core cutting- up to 100 mm dia./300mm thick Wall/beam/slab with 4.00 job 1534.00 RS: One Thousand Five

providing PVC pipe of 3 mm thick inside and necessary finishing on both ends of Hundred Thirty Four only

80 Dismantling the existing light, fan, bell, , independent plug point, wiring with mains 185.00 Each 1.00 RS: One only

of all types along with accessories etc. complete and handed over to dept.

81 Dismantling the existing switchgears, DB and Busbar of any size complete with / 5.00 Each 7.00 RS: Seven only

without board or angle iron frame.

82 Dismantling the existing any type of indoor light fittings 100.00 Each 5.00 RS: Five only

83 Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete 55.00 Each 9.00 RS: Nine only

with accessories, G.I. down rod, frame etc. and making the site clear.

[B] Electrick Amount

[A] Civil Amount

Total DTP Amount

NADIAD Gandhinagar