C/O Zonal Veterinary Hospital at Mangwain Mandi Distt.Mandi HP

Amount

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering/dewatering and lift up to any height stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) layers when required into plinth sides of foundations consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Excavation in drain and channels etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing watering /dewatering including dressing of sides and bed and disposing of excavated earth upto any lead and lifts disposed earth to be leveled and neatly dressed including carriage of materials with in all leads, lifts and other incidentals.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials with in all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (thirty millimetre into thirty millimetre into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals in:-

Foundation, footings bases of columns etc. and mass concrete.

Columns, pillars, posts and struts square rectangular or polygonal in plan.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses , plinth and string courses and the like.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto any thickness.

Sides and soffits of beam haunching, cantilevers bressumers and lintels any hight and depth in all floor.

Stair cases with slopping or stepped soffits excluding landings.

Edges of slabs and breaks in floors and walls in any width.

Cornices and mouldings

Vertical fins and vertical sun breakers

Providing and laying reinforced cement concrete design mix M-25 (twenty five) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work. The mix shall be designed as per requirement of I.S. code and P.W.D. specification. The design mix will be got approved from the Engineer -In - Charge prior to the casting-1 theoritical consumption of cement for the item shall be worked out as per approved design mix as per code including carriage of materials with in all leads, lifts and other incidentals in:-

Foundation, footings bases of columns etc. and mass concrete including carriage of materials with in all leads, lifts and other incidentals

Columns, pillars, posts and struts square rectangular polygonal in plain upto floor all level.

Wall any thickness but not less then 0.10 metre (zero point one zero metre) thickness including attached pilasters, buttresses, plinth and string courses etc. from top of foundation upto all floor level.

Suspended floors, roofs, landing, shelves and their supports, balconies, beams, girders, bressumers and cantilever upto floor all level.

Stair cases (except spiral stair cases) excluding landing but including preparing of the top surface and finishing of nosing upto floor all level.

Vertical and horizontal fins (thickness not more than0.10m) individually or forming box louvers and projected band upto floor two level.

Providing and laying reinforced cement concrete design mix M-20 (twenty ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work. The mix shall be designed as per requirement of I.S. code and P.W.D. specification. The design mix will be got approved from the Engineer -In - Charge prior to the casting. The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code in string courses coping bed plates anchor blocks plain windows sills and the like upto floor all level including carriage of materials with in all leads, lifts and other incidentals in:-

Wall any thickness but not less then 0.1m (zero point one metre) thickness including attached pilasters, buttress, plinth and string courses etc. from top of foundation upto all floor level.

Suspended floors, roofs, landing, shelves and their supports, balconies, beams, girders, bressumers and cantilever upto floor all level.

Providing and laying cement concrete 1 : 4 : 8 (one cement : four sand : eight graded crushed stone aggregate 40 mm (Forty millimetre nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position including cost of binding wire complete upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Second class brick work using common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Half Brick masonry in second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:4 ( one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

Square rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:4 (one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

Stone soling / boulder filling dry hand packed in under floor including carriage of materials with in all leads, lifts and other incidentals.

Providing 40x3mm (Forty into three millimeter) flat iron hold fast 40cm (Forty centimeter) long including fixing to frame with 10mm (Ten millimeter) diameter bolts and nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimeter) in 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (Twenty millimeter nominal size including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing factory made flush doors 35mm thick shutter decorative type core of black board construction with frame of first class hard wood and well matched first class Indian Teak ply veneering with vertical grain or cross bends and face veneering on both faces of flush door shuttre ISI marked IS No. 2202 of kit ply or equivalent including black enamelled MS butt hinges, complete in all respect including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows, clerestory windows including bright finished/black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 12mm (twelve millimetre) thick 150mm (one hundred fifty millimetre) wide pelmet with 25 mm (twenty five millimetre) diametre wooden curtain rods and brackets including fixing 25x3mm (twenty five into three millimetre) M.S. flat at 10 cm. (ten centimetre) Long and plugs second class deodar wood etc. complete. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. grill of required pattern in wooden/steel frames of windows etc. with M.S. flat square or round bars with round headed bolts and nuts or by screws plain grill including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 300x16mm (three hundred into sixteen millimetre) anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 250x10mm (two hundred fifty millimetre into ten millimetre)aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 125mm (one hundred twenty five millimetre) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm (hundred millimetre) bright finished brass door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 12mm (twelve millimetre) thick prelaminated board both side bwp phenol bonded exterior/ interior grade panelled shutters with frame of first class deodar wood for cup board including nickel plated bright finished piano hinges- 25mm (twenty five millimetre) thick frame including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (Conforming to IS: 6315) for aluminium doors including cost of cutting floors as required, embedding in floors and cover plates etc. complete as per the direction of Engineer-in-charge including making good the floors including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 150mm (one hundred fifty millimetre) oxidized MS single acting spring hings bright finished with necessary screws etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 100mmx10mm (one hundred and ten millimetre) M.S. tower bolts (barrel type) with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing oxidized M.S. handles with necessary screws etc. complete 100mm (one hundred millimetre) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing oxidized M.S. hooks and eyes 100mm (one hundred millimetre) including carriage of materials with in all leads, lifts and other incidentals.

Kota stone slab flooring 20 mm (twenty millimetre) (average) thick base of cement mortor 1:4 (One cement : Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete 30mm (thirty millimetre) thick including carriage of materials with in all leads, lifts and other incidentals.

3 mm (three millimetre) thick pvc/rubber tile flooring. plain, coloured, corbed, or mosaic or mottled finish. laid with approved adhesive on sub floor complete (sub- floor incuding damp proofing treatment to be measured separately for payment) including carriage of materials with in all leads, lifts and other incidentals.

Kota stone slab 25mm (twenty five millimetre) thick in risers of steps, skirting dado and pillars laid on 12mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

White glazed tiles 6mm (Six millimetre)thick in skirting risers dado etc. laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 10mm (Ten millimetre) anti skid water proof stain and impact resistant heavy duty vitrified tiles Nitro or equivalent 600x600x10mm (six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying Duro stone vitrified tiles 300 x 300mm x 10mm (three hundred millimetre into three hundred millimetre into ten millimeter) in grey/colored or of approved shade in flooring, treads of steps and landing on a bed of 12mm (Twelve millimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials with in all leads, lifts and other incidentals complete in all respect.

Providing and fixing 0.60mm (Zero point sixty millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with screws preprinted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia metre with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (Zero point sixty millimetre) thick pre-painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 (Twenty) microns over 5 (five) microns primer coating + back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing valley 90 cm (ninety centimetre) overall 0.60mm (Zero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of back coat of polyester of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. BP sheet 1.66mm (One point sixty six millimetre) to 2mm (Two millimetre) thick in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work sheet be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15cm (fifteen centimetre) wide 45cm (forty five centimetre) overall semicircular plain G.I.sheet 0.80mm (zero point eighty millimetre) thick sheet gutter with iron brackets 40x3mm (forty into three millimetre) size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 150 mm (one hundred fifty millimetre) dia. a P.G.I. sheet bend of required degree (0.63mm thick sheet)for rain water pipeincluding carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 150mm (one hundred fifty milimetre) dia pipes including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials with in all leads, lifts and other incidentals.

PVC plain bend 150mm (one hundred fifty millimeter) dia

PVC shoe 150mm (one hundred fifty millimeter) dia

Providing and fixing 6mm (six millimetre) thick Cement fiber board ceiling of approved quality of ISI mark as per direction of Engineer-In-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Everest False ceiling board Ceiling of approved quality of ISI Mark and including Aluminium Tee sections with screws complete as per specification and including hangers and carriage of material and as per direction of Engineer-In-Charge including carriage of materials with in all leads, lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials with in all leads, lifts and other incidentals.

In gratings framed guard bars, ladders, railing, brackets and similar works

In beams, joists, channels, angles, tees, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters purlins connected to common rafters and the like.

Providing and fixing MS channel doors, windows frames manufactured from MS section ISMC 75 x40mm (seventy five into forty millimetre) and MS flat 75x5mm (seventy five into five millimetre) including hinges,jambs bead and if required angle threshold M.S. angle 5x25mm (five into twenty five millimetre) welded or rigidly fixed by mechanical means with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimetre) and provision of locking arrangement and shock observer as specified and applying a coat of approved steel primer after prettreatment of surface as directed by the Engineer-In-charge including carriage of material with all leads and lifts.

Providing and fixing window shutter having style of z-section on with T-section of 25x25x3mm (twenty five into twenty five into three millimetre) and angle iron 25x15x3mm (twenty five into fifteen into three millimetre) as per drawing complete with fitting and necessary screws and applying a priming coat with red lead paint complete as per approved specification/design direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing steel wire gauge shutter in Z- section using galvanised MS wire gauge of IS gauge designations 85G with wire of dia 0.56mm (zero point five six millimetre) for doors, windows and clearstory windows including metal beading of approved quality and shape section with necessary steel screws including applying a priming coat of red lead paint complete as per approved specification / design including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing glass panes with putty and nails plain glass 4mm thick including carriage of materials with in all leads , lifts and other incidentals.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing finish oil grease to give as even shade including cleaning the surface of oil dirt- dust and other foreign matter (Enamel paint other than white) (Nerolac/ Asian Shalimar) conforming to IS: 3536-1966 including carriage of materials with in all leads, lifts and other incidentals.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint with wood priming pink of approved brand and manufacture (Nerolac/ Asian Shalimar) conforming to IS: 3536-1966 brushing including carriage of materials with in all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint other than white including carriage of materials with in all leads, lifts and other incidentals.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials with in all leads, lifts and other incidentals.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt,dust and other foreign matter etc. including sand paper smooth complete including carriage of materials with in all leads , lifts and other incidentals.

15mm cement plaster in single coat on the rough side of brick/concrete /stone walls for interior plastering up to floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:5 (one cement : five sand ).in all floors including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete /stone walls for interior plastering upto floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete /stone walls for interior plastering upto floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:4 (one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

6mm cement plaster to ceiling in cement mortar 1: 3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals.

Distempering (two coats) acralic washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper primer including carriage of materials with in all leads, lifts and other incidentals.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surface (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material. including carriage of materials with in all leads, lifts and other incidentals.

Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated bed dry brick/stone aggregate 40mm nominal size) well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials with in all leads, lifts and other incidentals.

Providing plinth protection 50mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm nominal size mechanically mixed finishing surface of concrete smooth as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying of 10cm (ten centimetre) cement concrete 1:5:10 (one cement: five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement and curing complete as per standard design as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

40mm (forty millimetre) thick cement concrete flooring 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) laid in one layer finished with a floating coat neat cement. in all floors including carriage of materials with in all leads, lifts and other incidentals.

Supplying and stacking at site crushed stone aggregate/chipping of approved quality of 40mm (forty millimetre) size and down gauge as per specification free from disintegrated pices deleterious, dirt, dust and other organic matter including loading unloading and carriage of material with in all leads and lifts and stacking in proper stacks along the road as per direction of entire satisfaction of Engineer-in-Charge. The voids shall be deducted as per specification.

Providing and laying 250mm (two hundred fifty millimetre diameter) dia. (to level or slopes) and jointing with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) salt glazed stoneware pipes grade 'A' of the following internal diameters including testing of pipes and joints complete including carriage of materials within all leads, lifts and other incidental.

Providing and laying cement concrete 1:5:10 (1 Cement: 5 Sand :10 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes 250mm (two hundred fifty millimetre diameter) dia. necessary form work and curing complete including carriage of materials within all leads, lifts and other incidental.

Providing and fixing C.I. cover 500mm dia medium duty with frame weight 116 Kg. (one hundred sixteen kilograms) including carriage of materials within all leads, lifts and other incidental.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level :- 1000 (one thousand) litres net capacity tank including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 25mm (Twenty five millimetre) nominal bore brass fullway valve with wheel including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing of electric motor to lift the water from rain harvesting collection tank sluice valve 2.½" (two point one/two inches) for rain harvesting collection tank to top of building including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making grout the wall ceiling and floors 25mm (twenty five millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor: 20mm (twenty millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying in trenches, galvanised mild steel tubes (midium grade), tube fitting (earth work in trenches to be measured and paid separately 15mm (fifteen millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm (twenty millimetre to forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing brass full way valve with wheel 20mm (twenty millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing G.I./M.I Union of following sizes (where not included in the items 20mm (twenty millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing G.I./M.I Union of following sizes (where not included in the items) 15mm (fifteen millimetre) dia including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 2000 litres (two thousand litre) net capacity PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level :- including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing viterous China (Hindware) EWC(P) seat with UF soft close seat cover, hinges, accessories set size 57.5x36x39cm (fifty seven point five into thirty six into thirty nine centimetre) including free fall sheet cover (CAT No. 20079 star white including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing vitreous china wash down water closet squatting pan (Indian Type -W.C. Pan) size 580mm (five hundred eighty millimetre) (earth work, bed concrete foot rest and trap to be measured and paid for separately) Orissa pattern including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC P or S trap for water closet (squatting pan) ISI marked including jointing the trap with pan and PVC pipe with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals..

Providing and fixing PTMT Coloured / white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately). 10 litres (ten litres) net capacity including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing wash basin size 55x40x83cm (fifty five into forty into eighty three centimetre) with fixing accessories set with Pedestal for (Cat No. 10008 Hindware) as per direction of Engineer-In-Charge (Starwhite) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110 mm X 90 mm (one hundred ten into ninety millimetre) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100 mm (hundred millimetre) dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia.high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC single equal branch with oval access door ISI marked insertion rubber washer 3mm (three millimetre) thick, bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC door bend with oval access door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia. PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting. 610 x 510 mm (six hundred ten into five hundred ten millimetre) with bowl depth 200 mm (two hundred millimetre) complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous china bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (Waste pipe to be measured and paid for separately) Flat back type of size 430x260x350mm (four hundred thirty into two hundred sixty into three hundred fifty millimetre) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Division plate for urinals 600x300mm (six hundred into three hundred millimeter) vitreous china complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P. brass bib tap with Capstan head 15mm (Fifteen millimetre) dia including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass stop cock complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC connection pipe with brass unions 300/450mm (three hundred/ four hundred millimetre) length 15mm (fifteen millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimeter) dia diametre C.P. brass waste for wash basin or sink of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetre) nominal bore C.P. brass flush pipe / spreaders for urinal with fitting such as unions, clamps etc. (all in C.P. Brass) including cutting holes and making good the same including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass mounted on 6mm (Six milimtre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer complete as per the direction of Engineer-in-charge including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass pillar tap with capstan head (15mm dia) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 750 x 20mm (seven hundred fifty into twenty millimetre) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr. (one point five meter) Tube including carriage of materials with in all leads, lifts and other incidentals.

Constructing manhole with R.C.C. top slab in 1 : 2: 4 ( one cement : two sand : four graded stone aggregate 20mm nominal size foundation concrete 1 : 4 : 8 ( one cement : four sand : eight graded stone aggregate 40mm nominal size inside plastering 15mm thick with cement mortar 1 :3 ( one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2 :4 mix (one cement : two sand : four graded stone aggregate 20mm nominal size finished smooth complete including curing and testing inside size 800mmx800mm and 500mm deep including C.I. cover with frame (light duty single seal pattern-1) 455mmx610mm internal dimensions total weight of cover and frame to be not less than 38Kg. weight of cover 23Kg. and weight of frame 15Kg. with 300mm thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals.

Fixing water meter stop-cock in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, sockets, etc. cutting and making long screws complete (water metre and stop-cock to be measured and paid for separately) 15mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals.

JEET KUMAR GUPTA