REPAIR AND MAITENANCE OF LT UNDER GROUND CABLES STREET LIGHTS BOLLARD LIGHTS EXTERNAL WATER SUPPLY PIPE LINES AND VARIOUS TYPE OD PUMPS INSTALLED AND REPAIR MAINTENANCE OF INTERNAL WIRING WITH FITTING AND FIXTURES FANS GEYSERS INCLUDING COMPREHE

Amount

SCHEDULE 'A' E/M ITEMS

Taking down carefully burnt out aluminium/copper point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pendent, regulators, sockets, flourescent tube light fittings etc to be measured and paid for seprately) removing materials to store for schedule of credit and making good to the disturbed surfaces of walls ceilings and floors etc., Complete all as specified & directed by Engineer-in-Charge.

Disconnecting of unserviceable sub main wiring of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces including painting, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for point wiring using ISI marked 1.1 kV grade single core FRLSH flexible cable of 1.5 Sqmm conforming to IS: 694-1990, having multi-drawn thin strands of electrolytic copper conductor, conforming to IS: 8130-1984 and insulation conforming to IS: 5831-1984, for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in not less than 25mm size PVC casing caping surface conforming to IS: 9537 (Part 3)- 1983, colour-coded as specified in IS: 11353- 1985, thick modular cover-plates, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells/ Anchor/RR Cables NOTE:- (i) Exsisting Modular sheet metal box should not be removed (ii) Mounting plate and cover plate of exsistng size is to be replace and rate are deemed to be inlcuded in quoted rate.

One light/ Bulb Holder /fan/exhaust point / bell point controlled by one, one way switch

One light point controlled by 2, Two way switch

One 5 pin socket outlet 5/6 amps on the same board.

One 5 pin socket oulet 5/6 amps on independent board.

one 3 Pin socket out let 5 Amps on the same board.

one 3 pin socket out let 5 Amps on the independent board

All as per item No 3 above but 2.5 Sqmm wire for 15 Amps power socket point, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in replacement of modular type 6 Amp one-way SP switch, conforming to IS: 3854-1997 with finger proof terminal, Complete all as specified & directed by Engineer-in-Charge. Make:- Anchor/ Havells/Legrend

Supply & Fixing replacement of modular type 16 Amp one-way SP switch, conforming to IS: 3854- 1997 with finger proof terminal, Complete all as specified & directed by Engineer-in-Charge. Make:- Anchor/ Havells/Legrend

Supply & Fixing replacement of modular type 2/3 pin combined shuttered type 6 Amp socket conforming to IS: 1293- 2005, Complete all as specified & directed by Engineer-in-Charge. Make:- Anchor/ Havells/Legrend

Supply & Fixing replacement of modular type 2/3 pin combined shuttered type 6/16 Amp socket conforming to IS: 1293- 2005, Complete all as specified & directed by Engineer-in-Charge. Make:- Anchor/ Havells/Legrend

Supply & Fixing replacement of modular type 6 Amp bell-push conforming to IS: 8884- 1978 with finger proof terminal, Complete all as specified & directed by Engineer-in-Charge. Make:- Anchor/ Havells/Legrend

Supply & Fixing replacement of modular type 120 W step fan regulator of 2 module size, conforming to IS: 11037-1984, Complete all as specified & directed by Engineer-in-Charge. Make:- Anchor/ Havells/Legrend

Supply & Fixing in replacement of 6 Amp, 250 V high quality robust surface/flush type polycarbonate/PVC ceiling rose, conforming to IS: 371-1979, having 2/3 terminals and outside diameter not less than 63.5 mm, Complete all as specified & directed by Engineer-in-Charge. Make:- Anchor/ Havells/Legrend

Material & Labour for Point wiring with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH cable 650/1100 Volts grade drawn through and including non metallic PVC heavy duty casing caping minimum 25mm size but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part- I) ISI marked with wall thickness not less than 1.8mm including casing caping accessories like bends, tees, etc., fixed on wall or ceiling etc., including 1.5 Sqmm PVC insulated but unsheathed multi-stranded copper conductor FRLSH cable as earth continuity wire of suitable size with 3mm thick bakelite sheet white/coloured top cover for:- Make:- Havells/ Anchor/RR Cables NOTE:- (i) Exsisting metal sunkem box should not be removed (ii) Backlite sheet of exsistng size is to be replace and rate are deemed to be inlcuded in quoted rate. (iii) PVC box and switch board for mounting of switch sockets are deemed to be included in unit rate.

One light point/fan point/ bell point controlled by one, one way switch.

One light point controlled by Two, Two way switch

One 5 pin socket outlet 5/6 amps on the same board.

One 5 pin socket oulet 5/6 amps on independent board..

Material & Labour for Point wiring complete with 2.5 Sqmm single core PVC insulated but unsheathed multistrand copper conductor FRLSH cabel 650/1100 Volts grade conforming to IS-694 drawn through PVC casing caping (minimum 25mm size (external) or exsisting conduit but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part- I) ISI marked with wall thickness not less than 1.8mm heavy including 2.5 Sqmm PVC insulated but unsheathed copper conductor FRLSH cable as earth continuity wire for one 3 pin 15 or 16 Amps socket outlet on independent board, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells/ Anchor/RR Cables NOTE:- (i) Exsisting metal sunkem box should not be removed (ii) Backlite sheet of exsistng size is to be replace and rate are deemed to be inlcuded in quoted rate. (iii) PVC box and switch board for mounting of switch sockets are deemed to be included in unit rate.

Material & Labour for Point wiring complete with 4.0 Sqmm single core PVC insulated but unsheathed multistrand copper conductor FRLSH cable 650/1100 Volts grade conforming to IS-694 drawn through PVC casing caping (minimum 25mm size (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part-I) ISI marked with wall thickness not less than 1.8mm heavy duty including 4.0 Sqmm PVC insulated but unsheathed copper conductor FRLSH cable as earth continuity wire for on AC metal socket box, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells/ Anchor/RR Cables

Supply & Fixing in replacement of switch piano flush button 230 V, 6 Amps, Single pole, 1 way ISI marked, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells /Anchor/Cona

Supply & Fixing in replacement of Socket outlet flush type 2 in 1, 3 pin, 5A 230 Volt, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells /Anchor//Cona

Supply & Fixing in replacement of Socket outlet 3 pin, 15 Amp, flush type, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells /Anchor/Cona

Supply & Fixing in replacement of switch piano flush button 230 V, 16Amps, Single pole,one way ISI marked, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells /Anchor//Cona

Supply & Fixing in replacement of Rigid non-metallic PVC conduit of 25mm dia of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., Complete all as specified & directed by Engineer-in-Charge. Make:- Precision/Prince/Supreme

Supply & Fixing in replacement of Rigid non-metallic PVC conduit of 20 mm dia of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., Complete all as specified & directed by Engineer-in-Charge. Make:- Precision/Prince/Supreme

Supply & Fixing in repair ding dong bell AC 230V, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in replacement of Polycarbonate type 65mm dia ceiling rose 2/3 terminal suitable for 230 Volt, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells/Legrend/Anchor

Supply & Fixing in replaecment fan regulator steped type 230 Volt, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells/Legrend/Anchor

Material & Labour for submain wiring using ISI marked 1.1 kV grade single core HR- FR flexible cable, conforming to IS: 694- 1990, having multi-drawn thin strands of electrolytic copper conductors and insulation conforming to IS: 5831- 1984, type C, HR 85° C + FR for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in not less than 25mm NB UPVC medium grade surface/recessed exsisting conduits, conforming to IS: 9537 Part- 3, colour-coded as specified in IS: 732- 1989, including making good of disturbed surfaces of wall/ceiling/floor, and painting, Complete all as specified & directed by Engineer-in-Charge. Make: RR Kabel/ Polycab/ Havells/ Finolex (HR-FR flexible cable) & Precision/ Prince/ Supreme (PVC conduit) NOTE:- 01 run of phase conductor, 01 run of neutral conductor, 01 run of earth continuity conductor and 01 run of concealed conduit shall be measured as one length.

2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire

2 x 6.0 Sqmm + 1 x 6.0 Sqmm earth wire

Supply & Fixing in replacement of follwing DB sheet enclosure double door type single pole and neutral 240 Volt with standarad bus bar enclosed in Complete all as specified & directed by Engineer-in-Charge. of follwing size:-

SPN DB double door 240 Volt 4 way with 200 amp rated bus bar complete with fixing accessories. Make Hensal/Legrend/Schnider

SPN DB double door 240 Volt 8 way with 200 amp rated bus bar complete with fixing accessories. Make Hensal/Legrend/Schnider

TPN DB double door 240 Volt 4 way with 200 amp rated bus bar complete with fixing accessories. Make Hensal/Legrend/Schnider

Supply & Fixing in reapir MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in reapir MCB SPN 32 Amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in reapir MCB TPN 63 Amp rating 415 V, 10KA 'C' curve complete with connection testing and commissioning, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in reapir Isolator 4 pole 40 Amp rating, 10KA 'C' curve complete with connection testing and commissioning, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in reapir Isolator 4 pole 25 Amp rating, 10KA 'C' curve complete with connection testing and commissioning, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in reapir Isolator 4 pole 63 Amp rating, 10KA 'C' curve complete with connection testing and commissioning, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in reapir Isolator 4 pole 100 Amp rating, 10KA 'C' curve complete with connection testing and commissioning, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repair residual current circuit breaker (RCCB)/ELCB of DP of capacity 32Amp , 100 Amps, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells/ HPL/L&T/Indo Asian

Supply & Fixing in replacement of track light, track mount LED COB luminarie with high efficacy housing made of extruded aluminium 240V, 50Hz, 20W, CCT 4000K, Complete all as specified & directed by Engineer-in-Charge. Make:-Philips/ GE/Wipro Note- cost of replacing in existing cut out of false ceiling deemed to be included in unit rate

Supply & Fixing in replacement of Sleek surface downlight LED recessed mounted luminaire, 240V, 50Hz, 18W, CCT 5700 K, round in shape, cutout dimension 168 mm, Complete all as specified & directed by Engineer-in-Charge. Make:-Wipro /Philips/ GE Note- cost of replacing in existing cut out of false ceiling deemed to be included in unit rate

Supply & Fixing in repair to replacement Sleek round recessed mounting LED downlight with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation 6 W LED compact vertical round shaped downlighter low ceiling warm white/ day cool light /Ecco light,Complete all as specified & directed by Engineer-in-Charge. Make:- Bajaj / Havells/CG/Philips

Supply & Fixing in repair to replacement Sleek round recessed mounting LED downlight with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation 18 W LED compact vertical round shaped downlighter low ceiling light, Complete all as specified & directed by Engineer-in-Charge. Make:- Bajaj / Havells/CG/Philips

Supply & Fixing in repair to replacement environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for armstrong/grid ceiling and POP mounting of cap 42 watt, size 2x2 complete including lectronic driver, Complete all as specified & directed by Engineer-in-Charge. Make: - Havells/ PHILIPS /WIPRO/CG

Supply & Fixing in replacement decorative wall light, gold finish fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells / Philips/ Bajaj/ Orient

Supply & Fixing in replacement Environment friendly, energy efficient, aesthetically designed, surface ornamented with rings, moulded body, wall/ceiling light LED fixture with diffuser to give glare free light for 8 watt, iComplete all as specified & directed by Engineer-in-Charge. Make:-Havells / Philips /HPL / Wipro/ CG

Supply & Fixing in replacement recess mounted 15 W LED compact edge pro range of silm fit low profile down light,Complete all as specified & directed by Engineer-in-Charge. Make:- Havells /Philips/wipro/Syska/CG

Supply & Fixing in replacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with flexible copper conductor cable of suitable size, Complete all as specified & directed by Engineer-in-Charge. Make:-Philips/HPL/Orient/SYSKA

Supply & Fixing in replacement swivel COB LED down light fitting 12 W with crysp light throw and high CRI of warm white/ day cool lioght including connecting up with flexible copper conductor cable of suitable size, Complete all as specified & directed by Engineer-in-Charge. Make:-Havells /Philips/HPL/Orient/SYSKA

Taking down of following items for servicing, cleaning all the dust partical and oiling and greasing the bearing and cheking the electrical connection, including painting and refixing of ceiling fan/exhaust fan and wall mounted fan in situ, Complete all as specified & directed by Engineer-in-Charge. Note: (i) Spare parts will be measured and paid separatly. (ii) Rewinding/repair of fan motor will be measured and paid seprately.

Ceiling Fan 1200 mm sweep

Exhaust Fan 240/300 mm

Exhaust Fan 450 mm

Wall mounted fan 300 mm

Material & Labour for cutting of burnt winding of rotor and rewinding with same gauge copper wire winding with insulated material and re-assembling and other repairing work complete all as spd and directed by Engineer-in-Charge. Note:- Taking down and refixing charges will be paid under relvent items

Ceiling Fan 1200 mm sweep

Exhaust Fan 240 mm

Exhaust Fan 450 mm

Wall mounted fan 450 mm

Supply only spare parts of Fan/Exhaust fan of following rating all as spd and directed

Capacitor 2.5 MFD

Capacitor 3.15 Mfd

Ball Bearing No 6201

Ball Bearing No 6202

Mild steel Down Rod 600 mm Long with Clamp nut bolts & split pin as par sample

Mild steel Down Rod with Clamp nut bolts & split pin for 900mm Long as par sample

Dismantling electric/water connection and taking down of storage type water heater,servicing,cleaning of inner tank etc.at site.and replacement of burnout parts etc. and refixing in situ, Complete all as specified & directed by Engineer-in-Charge. Note- wornout parts shall be measured as seperatly.

Supply & Fixing in replacement of Heating element 1.5/2 KW Tringular/ circular type with rubber gasket, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in replacement Thermostat as per sample/suitable to 25 Ltrs capacity ISI marked, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in replacement 3 core 1.5/2.5 sqmm PVC insulated cable, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in replacment of body of geyser 25 Ltr capacity vertical type with new body complete with 1.5 Kw heating elements, led indicator lights, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repair Surface and wall mounted LED batten 20/22 watt 4 feet, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%Complete all as specified & directed by Engineer-in-Charge. Make:-Havells / Philips / Bajaj / Wipro

Supply & Fixing in repair LED post top made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection made in cast aluminium spigot housing with decorative clear acrylic diffuser with 70W LED and inbuilt driver, Complete all as specified & directed by Engineer-in-Charge. Make:- Bajaj / Havells/Philips/CG

Supply & Fixing LED step light 9 watt with die-cast aluminum housing designed for rugged outdoor usage & IP 65 protection of cat part No BGSBL 9W LED warm white including taking down the old unsv light, Complete all as specified & directed by Engineer-in-Charge. Make:- Bajaj /Philips/CG/Havels

Supply & Fixing in repair Cone LED Bollard light 8W, new generation, energy saving, environmetal friendly, long life aesthetically designed aluminium landscape luminaire for diffuser lighting with high power LED , IP 65 warm white complete with nut, bolt and PCC Foundation, Complete all as specified & directed by Engineer-in-Charge. Make:- Wipro /Bajaj/Philips//CG

Supply & Fixing in repair Cone NXB LED Bollard light 8W, new generation, energy saving, environmetal friendly, long life aesthetically designed aluminium landscape luminaire for diffuser lighting with high power LED , IP 65 warm white complete with nut, bolt and PCC Foundation, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells / Bajaj/Philips/Wipro /CG

Supply & Fixing LED Garden light 8W, new generation, energy saving, environmetal friendly, long life aesthetically designed aluminium landscape luminaire for diffuser lighting with high power LED , IP 65 bamboo, including taking down the old unsv light, Complete all as specified & directed by Engineer-in-Charge. Make:- Havells/ Bajaj/Philips/Wipro /CG

Supply & Fixing in repair 60 watt LED street light, compact and aesthetic aluminium powder coated housing with precise street optics lense, IP66 fix on existing bracket and connection to existing electric network, Complete all as specified & directed by Engineer-in-Charge. Make:- Wipro / Bajaj/HPL/Philips/GE

Supply & Fixing Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66,70W LED flood light,suitable for highlighting architectural facade and general purpose lighting including taking down the old unsv fittings. of make Havells , 50 Hz. Incl IP 65 as per existing at site, Complete all as specified & directed by Engineer-in-Charge. Make :- Havells/ CG/Philips/HPL/Syska

Supply & Fixing in repair LED bollard in rectangular shaped victorian design with opal acrylic diffuser and IP 65 protection, integral type decorative with opal acrylic cover, Complete all as specified & directed by Engineer-in-Charge. Make-Bajaj product code 111771 type BGBOS 600 9 watt LED warm white colour or equivalent and as directed by Engr-In-charge.

Excavation in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth for laying of electric cables for fixing of poles and stay or for laying pipes (where provided for protection of cables) and getting out trimming the sides forming bottom surface to required level in soft/loose soil, Complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil, Complete all as specified & directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for preparing old rusted surface of steel tubular pole by means of sand paper/scrubing of dust etc and apply one coat of red oxide on surface of Metalic poles and applying two coats of silver paint on Pole and numbering of poles with synthetic enamel paint white in 100 mm high letters over 150x150 mm black base, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in replacement thermoplastic cable junction box for street lights of size 205 x 255 x 112mm including bus bar/terminal for cable connection with IP-66 protection, Complete all as specified & directed by Engineer-in-Charge. Make:- Hensel / Legrand/sintex

Supply & Lay in replacment of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross-sectional area, Complete all as specified & directed by Engineer-in-Charge. for following size of cable:- Make: Polycab/ Asian/ Gloster/Havells/KEI Note :- (i) Removing of interlocking/Paverblocks, tiles and refxing with the same location and making good the distrubed surface is deemed to be included in quoted rate. (ii) Fixing accessories for cable laying such as clamps and nut bolts are to be included in quoted rate.

10 Sqmm 4 Core

95 Sqmm 3.5 Core

35 Sqmm 3.5 Core

Supply and Lay in replacment of OD Double Wall Corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall for protection of underground Cable with all fittings laid in trenches/road/nallah or fixed along wall poles or laid under floor for the following dia (Excavation and earthwork shall be measured and paid separately) Complete all as specified & directed by Engineer-in-Charge. Make: Rex/Poly/Geminie Note:-(i) Fixing accessories for pipe laying such as clamps and nut bolts are to be included in quoted rate.

50 mm Outer dia

63 mm Outer dia

Material & Labour for Cutting & removing existing joint and supply, jointing and testing straight through Hot shrinkable cable joint including all materials and accessories suitable for 3.5 core XLPE cable of 1100 volts grade, Complete all as specified & directed by Engineer-in-Charge. Make:- 3M/Denson/Raychem RPG Note : Excavation and Earthwork shall be measured

25 Sqmm to 50 Sqmm

70 Sqmm to 150 Sqmm

185 Sqmm to 240 Sqmm

Comprehensive maintenance and servicing of air conditioner of model DSA1021R1 ductable type comprising of hermetic/ semi harmetically scrolled compressor indoor/out door unit with refrigerant use R--22/ R-407 C /R 410A, of capacity 8.75 TR, making servicing of the plants and making fully in serviceable condition installed at ICGS Udhyog bhawan, Complete all as specified & directed by Engineer-in-Charge. Note:- (i) The rates quoted by the tenderer includes the cost of complete comprehensive service including replacement of spares as required and visit the site at interval of 90 days to verify functioning of AC units till completion of contract as mentioned in Work Order No. 1. (ii) Rates inclusive of replacement of parts during currrency of contract as and when directed by Engr-in-Charge. (iii) Servicing/ Repairs of AC units shall be carried out through the OEM only. (iv) Contractor has to submit test certificate on completion of service/ repairs of AC units issued by service provider. (v) contractor is responsible to proper functioning of AC, leakage and seapage repiare is sole responsibility of contracter quoted rates should incl leakage and seapage repaire. (vi) this is Type 'A' AMC i.e. ALL IN ALL so that spares required will be provided by the contracter with in stipulated time period. (vii) complaints should be attended and rectified in 24 hr otherwise a penalty of rupees 2000.00 Rs per day will be recoverd from the contractor.

Material & Labour for servicing and testing of Split type air conditioners of 1.5/2 ton capacity of any make inverter / non inverter complete for minimum two times during the contract period of each unit by cleaning cooling coil, condenser fins, blowing off dust from machines & air filters, checking and de-carbonizing , oiling, compressor greasing of blower motor, checking and removing any vibration, remvoing and cleaning the air filter pad testing after fixing, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for detecting the cause of leakage in any type/capacity of 1.5/2 ton inverter / non inverter AC and ensuring the complete system leak proof and charging of refrigerant gas with appropriate quantity including testing for smooth functioning complete all as spd and as directed by Engr-In Charge Notes :- (i) Dismantling of unserviceable compressor, cost of refrigarent gas and re-installation of serviceable compressor after repairing are deeemed to be included in the quoted rates.

Material & Labour for repairing of PCB suitable for split type AC 1.5 TR type indoor unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for repairing of PCB suitable for split type AC 2.0 TR type indoor unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of indoor cooling coil of split type AC 1.5 TR unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of indoor cooling coil of split type AC 2.0 TR unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of Blower motor,single phase, 280-380Volt, 50Hz 3 speed for 1.5 Ton indoor unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of Blower motor,single phase, 280-380Volt, 50Hz 3 speed for 2.0 Ton indoor unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour in replacement of remote suitable for 1.5/2 Ton, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of Drain out PVC Pipe of 11/16 inch dia/17.79 mm innerdia for 1.5 Ton/2 ton AC, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of swing motor 230Volt for 1.5/2 Ton AC, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of compresser of outdoor unit of split type AC 1.5 TR, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of compresser of outdoor unit of split type AC 2.0 TR, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of out door copper condencer unit of size 20x 30inch size Copper tubing size 6 mm dia for outdoor Unit of split type AC 1.5 TR, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of out door copper condencer unit of size 20x 30inch size Copper tubing size 6 mm dia for outdoor Unit of split type AC 2.0 TR, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of fan motor for ac 230Volt 1180 Rpm for outdoor unit split type AC 1.5 TR, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of fan motor for ac 230Volt 1180 Rpm for outdoor unit split type AC 2.0 TR, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of running capacitor for motor of capacity 2/4/6 mfd 230 volt suitable for 1.5/2.0 Ton ac outdoor unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of compresser running capacitor of 50 mfd 230 volt suitable for 1.5/2.0 Ton ac outdoor unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of compresser starting capacitor of 45 mfd 230 volt suitable for 1.5/2.0 Ton ac outdoor unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of fan motor blade suitable for motor of 1.5/2 Ton AC outdoor unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of suction copper tubing of size 5/16'' dia meter with rubberised insulation and tape suitable for supply pipes for air-conditioners, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacment of discharge copper tubing of size exsisitng size mm bore including brazing etc and with rubberised insulation and tape suitable for supply pipes for air-conditioners, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for with rubberised insulation cover inclduing tape suitable supply pipes for air-conditioners, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing cable PVC insualted multistranded Copper conductor PVC cable of 3 core 3 Sqmm size, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in replacement of outdoor unit stand of metal inclduing fixing accessories such as nut bolt washers and fastner for 1.5/2 Ton outdoor unit, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in replacement of indoor unit bracket of metal inclduing fixing accessories such as nut bolt washers and fastner for 1.5/2 Ton outdoor unit, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in replacement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, Complete all as specified & directed by Engineer-in-Charge. Make:- ABB / Havells / legrend

Material & Labour for repairing of PCB suitable for Inverter type split type AC 1.5 TR type indoor unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for repairing of PCB suitable for Inverter type split type AC 2.0 TR type indoor unit, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of Blower motor, single phase, 230V, AC for 1.5 Ton indoor unit of Inverter AC, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of Blower motor, single phase, 230V, AC for 2.0 Ton indoor unit of Inverter AC, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of indoor condencer copper coil of inverter split type AC 1.5 TR,Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of indoor condencer copper coil of inverter split type AC 2.0 TR, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of oudoor condencer unit of copper with 2 run of copper pipe of out door unit of inverter split type AC 1.5 TR, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of oudoor condencer unit of copper with 2 run of copper pipe of out door unit of inverter split type AC 2.0 TR, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of compresser of outdoor unit of split type AC 1.5 TR inverter type, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of compresser of outdoor unit of split type AC 2.0 TR inverter type, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of swing motor 230 Volt for 1.5 Ton indoor unit inverter type AC, Complete all as specified & directed by Engineer-in-Charge.

Material & Labour for replacement of swing motor 230 Volt for 2.0 Ton indoor unit inverter type AC, Complete all as specified & directed by Engineer-in-Charge.

Taking down of split type AC 1.5 Ton Inverter type from site for replacement of outdoor unit and re-installing split type AC at site and including refixing of outdoor unit on wall and outdoor unit any wall mounted including bracket of MS and replacement of refrigerant tubing as per site std requirement upto 6 RM, any insulated, Complete all as specified & directed by Engineer-in-Charge. Note- Gas charging if required deemed to be included in unit rate. Make:- Voltas / Carrier / Hitachi

Taking down of split type AC 2.0 Ton Inverter type from site for replacement of outdoor unit and re-installing split type AC at site and including refixing of outdoor unit on wall and outdoor unit any wall mounted including bracket of MS and replacement of refrigerant tubing as per site std requirement upto 6 RM, any insulated, Complete all as specified & directed by Engineer-in-Charge. Note- Gas charging if required deemed to be included in unit rate. Make:- Voltas / Carrier / Hitachi

Taking down of split type AC 1.5 Ton Inverter type from site for replacement of indoor unit and re-installing split type AC at site and including refixing of indoor unit on wall and outdoor unit an wall mounted including bracket of MS and replacement of refrigerant tubing as per site std requirement upto 6 RM,any insulated, Complete all as specified & directed by Engineer-in-Charge. Note- Gas charging if required deemed to be included in unit rate. Make:- Voltas / Carrier / Hitachi

Taking down of split type AC 2.0 Ton Inverter type from site for replacement of indoor unit and re-installing split type AC at site and including refixing of indoor unit on wall and outdoor unit an wall mounted including bracket of MS and replacement of refrigerant tubing as per site std requirement upto 6 RM,any insulated, Complete all as specified & directed by Engineer-in-Charge. Note- Gas charging if required deemed to be included in unit rate. Make:- Voltas / Carrier / Hitachi

Material & Labour for taking out desert cooler of any size and capacity from existing site for repair and dismentaling of all components from evoparative cooler (desert cooler) metal body very care fully i.e. exhaust fan, motor, tulu pump, PVC spare parts i.e distributor, PVC pipe, tee, bend, elbow, holding clamp and any number of nut, bolt, washer, grass paid etc, including praparation of exterior and interior portion on cooler to a smooth finish and applying one coats of bituminious paint and reaasembling the same in existisng position in cooler for smooth running, Complete all as specified & directed by Engineer-in-Charge. Note:- If any worn out items/ parts found during the assembling the same shall be measured and paid separately under the relavent items of schedule.

Supply & Fixing in repairs PVC connection set of three suitable for existing desert cooler, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs cable three core flexible twiested copper conductor of 1.5 Sqmm, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs cable three core flexible twisted copper conductor of 2.5 Sqmm, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs front grill suitable for existing desert cooler, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs grass paid set of three superior quality, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs motor 1.0 Ph, 50 HZ 230 V, AC max Amp 1.5, suitable for existing desert cooler, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs tillu pump/ water pump for deseart cooler 240 V, AC 50 HZ, 10 Watt, 5 LPM, 2.0 mtr head, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs capacitor 4 Mfd + 5% 440 V MPP 'SH', Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs capacitor 6 Mfd + 5% 440 V MPP 'SH', Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs gas filter and NRV suitable for existing refrigerator and water cooler of cap 40-280 ltr, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs drain pipe for water cooler, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing non adhesive tape roll for copper tubing of AC, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs fan blower suitable for existing split AC, Complete all as specified & directed by Engineer-in-Charge.

Comprehensive maintenance/ servicing and testing of RO plant including washing, cleaning of sedimentation filter, disinfection process, servicing of pressure pumping set and dosing unit complete at so as to supply qualitative water at permissible level of TDS. Note:- (a) Spares required for replacement will measured and paid separately under respective items here-in-this schedule. (b) The rate quoted by the tenderer includes cost of maint/ servicing of above said plant once in a period of 90 days till the date of completion of work. (c) Servicing should be done by OEM/ authorized agency and not by any local mechanic. (d) Contractor shall be produce all purchase voucher and test certificate before submitted RAR. Note:- (i) Servicing should be done by OEM/ authorized agency and not by any local mechanics. (ii) Spare parts required will be measured and paid separately in relavant items of this schedule (iii) Replacement of sedmentation filter in each visit is deemed to be included in the unit rate.

Supply & Fixing in repairs RO membrane as existing for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs RO membrane Housing as existing 50/60 ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs carbon filter for 50/60 LPH ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs spum filter for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs PF candle for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs cartridge filter of 50/60 ltr RO, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs control module of 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs low/ high pressure switch of 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs pump for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs 1/2 Pipe for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs solenoid valve of 230 Volt for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs raw water pump for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs dosing pump for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs water controler sensor for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs UV system for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs low pressure/ High pressure DC switch for 50/50 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs stainer for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs anti scalant chemical, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing solenoid valve for 50/60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repairs booster pump 48 VDC suitable for 50/ 60 Ltrs RO plant, Complete all as specified & directed by Engineer-in-Charge.

Dismantling, cleaning and overhauling of 0.25/0.5 HP centrifugal mono block pump set/ pressure booster pump set of the following capacities including rewinding of motor with appropriate super enameled copper wire of existing gauge, replacement of bearing - 02 Nos, including all connection and testing complete for following capacities:- (i) Replacement of bush (gland). (ii) Replacement of pump shaft. (iii) Replacement of impeller. (iv) Replacement of shaft sleeve.

Servicing of DG set ('C' Check) of Cap 20 KVA by Rep of authorised service centre as per manufacturer manual and checking of fuel supply system, Lubrication system, cooling system, battery ignition system and rectification of defect if any and including replacement of following, Complete all as specified & directed by Engineer-in-Charge. (a) Lub oil filter. (b) Lubrication oil. (c) Fuel filter. (d) Coolent top up.

Supply only parts/ Items for DG set 20 KVA Complete all as specified & directed by Engineer-in-Charge. Following Part:-

V belt

Hose pipe set

Battery Terminal

Engine oil 20W40

coolant

Radiator servicing complete

HWT Switch

VDO Oil Pressure sensor cum Switch 0-7 BA

Water Pump Assembly

Controller panel of DG set

Fuel Retrun Pipe

Fuel Supply Pipe

Pipe EGR to EGR valve

AVR of DG for 20/25 KVA capacity including with connection complete all as specified and as directed

ALBA AC AND REF SERVICES

K K Construction Co