WELCOME MAINT SERVICES AND CERTAIN B/R WORKS AT NAGTALAO UNDER GE BANAR

Amount

Taking down cement plaster from brick walls/ stone walls etc. of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:6) on stone masonary surfaces of wall , finished even and smooth without using extra cement complete all as specified.

Preparation of plastered surfaces and applying 2mm thick wall care putty complete all as specified.

Preparation of newly plastered surfaced of wall and applying two coat of OBD on newly plastered surfaces of walls complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:4) on stone masonary surfaces of wall , finished even and smooth without using extra cement complete all as specified.

M&L for stone grit plaster on exterior walls in two layers, 1st layer of 10mm rough finish cement plaster 1:4 (1 cement: 4 coarse sand ) , 2nd layer to be applied after fresh washing of 1st layer and applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer of 12 mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) applied by pressure complete all as specified.

Preparation of newly plastered surfaces of wall & Priming plastered and other surfaces with alkali resistant priming paint and applying two coat of cement base paint complete all as specified.

M&L for 10mm thick rendering in cement mortar (1:4) on Concrete surfaces of ceiling/chajja/ facia , finished even and smooth without using extra cement complete all as specified.

Preparation of newly plastered surfaces of ceiling & applying three coat of white wash complete all as specified.

Preparation of old decorated plastered surfaces of ceiling & applying one coat of white wash complete all as specified.

Preparation of old decorated plastered surfaces of ceiling & applying one coat of OBD complete all as specified.

Preparation of old decorated plastered surfaces of wall & applying one coat of white wash with brush complete all as specified.

Preparation of old decorated plastered surfaces of wall & applying one coat of OBD complete all as specified.

Removing complete existing treatment and M&L for applying two coat of OBD on Old plastered surfaces over and including 2mm thick wall care putty on walls complete all as specified.

Preparation of old plastered surfaces of wall & applying one coat of cement base paint complete all as specified.

Preparation of old plastered/unplastered surfaces of wall & Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified.

Preparation of old treated wooden surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified.

Dismantaling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for coloured glazed ceramic tiles 300mmx450mmx6 to 7 mmthick as per IS 13712 Grade II(a) including 10mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) complete all as specified.

M&L for Virified Ceramic double charged tiles (Light shade) 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified.

All as item No 22.00 above but as in skirting including 10mm thick backing coat in CM 1:4 complete all as specified.

Dismantaling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in cement mortar complete all as specified.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land complete all as specified.

M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc complete all as specified.

M&L for coloured non skid ceramic tiles 400mmx400mmx6-7 mm thick as per IS 13712 Grade II(a) in floor etc set jointed and pointed in white or coloured cement to match as in floors over and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block (rubberised finish) of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified.

M&L for Chequered cement concrete tiles (rubberised finish) 30cm x 30cm x 25mm thick over and including 20mm thick screed bed in CM 1:6 complete all as specified.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed and removing debris out of MOD land.

M&L 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block (rubberised finish) of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

M&L Cement concrete in foundations, filling and mass-concrete Type B2 1:2:4 (40 mm graded aggregate) complete all as specified.

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E-250) quality A complete all as specified.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

Dismantling of plain or corrugated steel sheeting any guage, thickness, including Nainital or similar pattern roof coverings complete all as specified.

S&F Pre-laminated galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings with grade of zinc coating 275 complete all as specified.

Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land complete all as specified.

M&L for 10mm thick cement mortar 1:4 on roof surfaces and applying two coats of polyurethene (PU) acrylic based water proofing liquid compound over and including a coat of diluted elastomeric self primer and reinforcement fabric sheet as per manufacturer's instruction to stop leakage /seepage from roof/wall complete all as specified. Note : (i) Quated rate shall be deemed to be included for the work in building/ structure of any height. (taking down and refixing of tank at same position included) (ii) The procurement of material and execution of the work of water proofing treatment shall be got executed from one of the complete all as specified.

S&F in repair decorative type curtain rod stainless steel finish MS pipe 22 to 25 mm dia as per sample superior quality complete and incl brackets and Decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for holding & end cover complete all as specified.

Supplying and fixing in repair factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density with prelaminated sheet on one side cut in desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding, any description, fixed in any position with nails complete all as specified. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation.

Supplying and fixing in repair factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density manufactured by an ISO 9000 certified company using for shutter celluca ply 18 mm thick cut in desired size of shutter and fixed with frame of kitchen accesory/cubboard at all four edges of shutter using 13/6 size self tapping steel screws. below cooking platform The thickness of the shutter is edfe painted by matching colour of PVC ink of plain colour of PVC sheet using complete all as specified. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation.

M.A. MUNSHI AND CO. (BID ID -3303766)

Sukhdev Construction company (BID ID -3307649)

PREM TRADERS (BID ID -3308626)

Tirupati electricals works and services (BID ID -3303092)

M/s Anand Construction Company (BID ID -3307799)

Narender Constrution Company (BID ID -3303599)