SPECIAL REPAIRS TO BUILDING NOS T 381 (COOK HOUSE) AT 444 COY ASC (SUP) TYPE A AND REVENUE AND MINOR WORK AT MASIMPUR MIL STATION

B & R Division Items

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

Demolition of reed lathing, single or double including battens and plaster or chiken wire lathing all as specified.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises.

Dismantling stone slabs and tiles of any description or thickness in floors, apron etc including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed.

Dismantling of timber fillets rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position in unframed work complete all as specified.

Dismantling of timber scantling 40 Sqcm and over in section, in any position in unframed work.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified.

Dismantling boarding any description fixed in any position with nails all as specified.

Dismantling asbestos cement/PVC pipe 75/100 mm dia including clamps complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubing down with water etc complete all as specified and as directed.

Taking down wooden shutters of size not exceeding 1.0sqm and disposing off complete all as specified and directed.

Taking down wooden shutters of size exceeding 1.0sqm but not exceeding 2.0sqm and disposing off complete all as specified and directed.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing complete all as specified and as directed.

Surface dressing n.exc. 15 cm deep and getting out in soft/loose soil not exceeding 50 meters & depositing where directed.

Excavating in post holes each n exc 0.5 cum, getting out, in soft /loose soil, ramming earth filling or borken rubble mixed with earth around in layers nexc 25 cm watering and removing ssurfaces soil to distance nexc 50 m and making good surfaces all as specified and directed.

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of column, wall etc, not exc 10 sqm on plan and getting out in soft/loose soil etc complete all as specified and directed.

Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm complete all as specified and as directed.

Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick ,spread, levelled ,rammed and consolidated to required gradient and camber with 0.2 to 0.5 tone hand roller including watering complete all as specified and directed.

Material and labour for Brick aggregate Hardcore of guage exc 63mm but n exc. 100 mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed .

M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified and as directed.

Material and labour for 100 mm thick Plain Cement concrete 1:4:8 type B-1 (40mm graded aggregate) for base in floor fair and even without using extra cement complete all as specified and directed .

Material and labour for 75 mm thick Plain Cement concrete type D2 1:4:8 (40mm graded crushed stone aggregates) for sub base in floor fair and rough for receiving tiles all as specified and directed.

M&L for cement concrete type C2 1:3:6(40mm graded crushed stone aggregates) in foundation filling and mass concrete complete all as specified & as directed .

M&L for 75mm thick cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in alternate panels and joints filled with bituminous 1 part and 3 part of sand complete all as specified and directed.

Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel and drain all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends for etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm (For adjustment in girth of item No. Above )

Material and labour for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating , including necessary formworks, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in sub-bases for floors, complete all as specified and as directed.

S&F for glass dividing strips 38 mm width, 3.0mm thick inserted in position fixed in floor completed all as specified.

Material and labour for brick work with subclass 'B' old size bricks, straight or curved on plan exceeding 6 mtr mean radius , built in cement mortar 1:6 complete all as specified.

M&L brick work with sub class ‘B’ brick straight or curved on plan to any radius in half brick wall in cement mortar 1:4 complete all as specified and as directed.

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on one side of lathing in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even complete all as specified.

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair faces of brick wall or condrete surfaces in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even without using extra cement complete all as specified.

Material and labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified.

M&L rendering 10mm thick cement plaster on other than fair faces of brick wall or condrete surfaces in CM (1:6) finished fair and even complete all as specified.

Material and labour for 10 mm thick rendering in cement mortar (1:6) on other side of lathing surface finished fair and even complete all as specified.

Supply only integral water proofing compound complete all as specified and directed.

M&L for Non skid ceramic paver tiles area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor set, jointed &pointed with neat cement slurry with white cement and pigment including 20mm thick screed bedding layer in cement mortar (1:6) all as specified and directed.

M&L Non-skid colour ceramic tiles 7 to 8 mm thick coloured ( square/ rectangular) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm including screed bed or bedding layers of 15 mm thick cement mortar (1:6) as in floors set and jointed in pointed in white or colour cement complete all as specified and directed .

M&L Non-skid colour ceramic tiles 7 to 8 mm thick coloured ( square/ rectangular) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm as in skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 10mm thick backing coat of rendering with CM 1:4 as specified.

M & L glazed ceramic coloured tiles 450x350x7mm thick as in vertical surfaces such as skirting/dado etc over 10 mm thick cement mortar (1:4) set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tile complete complete all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid over 20mm thick screed bed in cm 1 : 3 with cement slurry @ 4 kg/sqm jointed and pointed with grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing to achieve mirror/granite finish complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed .

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified & as directed.

Supply and fix pre-painted galvatume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and rubber washer as specified.

Supply and fix pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and rubber washer as specified.

Supply and fixing steel work in trusses, purlins, posts and the like using (tubular/ square/rectangular) hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-240 complete all as specified and directed.

M & L Mild steel plates (plain or chequered) channels, square cut or not chequred (ordinary and counter sunk) forming holes, without any attachment for, Fe 410-W (Gde-E-250) quality-A,etc complete all as spd and directed.

Supply and fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F of mild steel rolled sections (Fe-290, Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and other misc brackets for fixing of eaves board etc. ; fixed with angle cleats or other connecting plates complete all as specified.

M&L MS work as in hold fasts, bands, straps, wall ties, plain angle cleats, eaves board frame and similar articles including welding and all necessary labour conforming to Fe 250 Gde-E-165.

Supply and fix Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and erecting W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150x75x5mm spaced 2m c/c 2.0 high, 1.5m below ground / road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to confirm to IS 1367 and IS 1364, metal beam rail to be fixed on the vertical post with a spacer of chanel section 150x75x5mm, 330mm long complete all as specified and directed.

Material and labour for Second class hardwood in scantlings timber unframed and fixed for wrought in section complete all as specified and directed.

S&F for GI wire netting 0.71 mm dia and 12 mm mesh lathing to wood or metal studding joints etc in walls ceiling stanchion, beams etc included all laps cutting and wastes

S&F 2nd class hard wood glazed and skeleton ventilator/window 30 mm thick open rebated and prepared to receive glass, wiremesh gauge etc (without sash bars), edge of framing plain chemfered rounded fitted with cut and mitred beds for securing glass etc size of members size of members of shutter as specified in SSR part I section 8 clause 8.20(b) complete all as specified and directed.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , smooth finish with lipping of teak wood on edges all as specified and directed.

S&F 2nd class hard wood, 35 mm thick, plain framed panel shutter (any numbers of panel) with panels of timber flat on both sides (feather edged) or 12 mm thick veneered particle board medium density fitted to chowkats or frames complete all as specified and directed.

S&F 2nd class hard wood glazed and skeleton door shutters 35 mm thick open rebated and prepared to receive glass, guage etc (withoput sash bars), edge of framing plain chemfered ro rounded fitted with cut and mitred beds for securing glass etc size of members of shutter as specified in SSR Part I section 8 clause 8.20(a)

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.0mm and fixed with stainless steel wire staples complete all as specified.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified.

Supply and fix 75 mm size stainless steel butt hinges medium weight complete all as specified & directed.

Supply and fix 100 mm long aluminium handles cast type anodised complete all as specified & directed .

S & F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

Supply and fix 150 mm long aluminium handles cast type anodised complete all as specified & directed .

Supply and fix 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 250 mm length of Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified.

S&F double action spring hinges, mild steel with steel wire spring, stove enamelled, black, size of spring hinge 150mm complete all as specified and as directed.

M & L for 2nd class hardwood fillets square, rectangular or tringular in section wrought screwed with nails exc 6 sqcm and n.exc 13 sqcm complete all as specified.

M & L for 2nd class hardwood fillets square, rectangular or tringular in section wrought screwed with nails exc 13 sqcm and n.exc 25 sqcm complete all as specified.

Supply, lay and fix 15 mm bore galvanised iron water tubing medium grade including all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed

Supply, lay and fix 20 mm bore galvanised iron water tubing medium grade including all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed

Cutting grooves or rebates not exceeding 15 cm girth, and trimming with or without reinforced surfaces complete all as specified and directed.

Supply and fix in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc.,overall size 495mm x 420 mm with bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

Supply and fix, as in repairs, 32 mm dia and 800mm long PVC flexible corrugated waste pipe for wash basin/sink complete all as specified and as directed. Make : (Prayag CAT No. 327) or equivalent as per make approved list

Supply and fix as in repair, 15 mm bore bib taps fancy type, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified.

S&F in reparis PVC ball valve 25mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe with including necessary tank lid all as specified

Supply and fix as in repair 20 mm bore dia, Gun-metal, gate valves, with iron wheel head, screwed both ends on G1 pipes with GI union fixed in existing/ new location including removing old unserviceable ones complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

Supply and fix 75 mm bore PVC (SWR) bends and radius complete all as specified.

M&L for 75mm PVC(SWR) floor trap, plain with grating incl jointing with solvent complete all as specified.

M&L for preparation of new plastered surface of walls and applying three coats of white wash on wall complete all as specified.

Material and labour preparation of new plastered surface of walls and applying two coat of oil emulsion distemper over one coat of primer on wall complete all as specified.

Material and labour for complete removal of existing treatment and applying two coat of oil bound distemper (white or tinted) over a coat of primer on wall complete all as directed.

M&L for providing and applying wall care putty 1 mm thick in two layers over plastered surface to prepare the surface even and smooth complete all as specified.

Material & Labour for preparation of new or previously untreated wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified.

Material & Labour for preparation of new plastered surface applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified.

Material & Labour for Complete removal of existing treatment wall surface and applyin Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified.

Material and labour preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material and labour preparation of new steel surfaces of any description n. exc 10 cm width or girth when unconnected with other painting or when painted in different tint with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of new wood or wood base surface of any description n exe 10cm width or girth applying two coats of synthetic enameled paint over one coat of pink primer complete all as specified.

E & M Division items

Taking down carefully copper/aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc including removing from site for taking credit and making good to disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed.

Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.

Taking out old U/s XLPE cable of any size/type taking out of clamps on wall complete all as specified and directed. (Excavation and earth work will be measured and paid separately under respective items)

Dismantling old unserviceable main switches, sheet metal enclosures DB including MCBs etc and removing from site for taking credit incl making good to disturbed surface of wall as per existing specification complete all as specified and as directed.

Taking out old U/s GI PIPE of any size/type including all GI fittings etc complete all as specified and directed. (Excavation and earth work will be measured and paid separately under respective items)

M & L for point wiring with FRLS stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one switch.

M & L for point wiring with FRLS stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One fan point/exhaust fan point controlled by one, one way switch 5 Amp.

M & L for point wiring with FRLS stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on the same board.

M & L for point wiring with FRLS stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per item No 2 above but with FRLS stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated and unsheathed cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including FRLS PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

S&F ceiling rose surface bakelite with three terminals all as specified and directed

S&F switch piano flush type button single pole one way 5 Amps all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed.

S&F switch piano flush type button single pole one way 15 Amps all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15amp flush type all as specified and directed.

S&F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified.

M&L for submain wiring with two single core 1.5 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid PVC Conduit with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 1.5 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLS connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.

M&L for submain wiring with two single core 2.5 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid PVC casing caping with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 1.5 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLS connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC casing caping will be measured as one length.

M&L for submain wiring with two single core 6.0 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid Conduit conceled with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 4.0 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLS connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.

Supply & Fix LED betten plastic type fitting of capacity 20W, operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 125 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of extruded alluminium with decorative end caps elegently designed complete all as specified.

S&F BLDC ceiling fan 1200mm sweep complete with blades, down rods and accessories, 230 V, min air delivery 210 CFM with service value 6.00 BEE 5 star rated & provn of ‘S’ type fan hook including including taking down of old UNSV one and depositing to MES storeyard for keeping in safe custody complete all as specified and directed.

S&F steel body exhaust fan 380mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces including taking down of old UNSV one and depositing to MES store yard complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and as directed.

S&F metal plug socket with MCB SP 20 Amp, 240 V enclosure for AC/equipment with neutral and earth point complete all as specified and directed.

S&F sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 way double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

S&F MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.

S&F MCB SP of capacity 5-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.

S&F bldg security light, LED luminaire 30 watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. Make - Crompton Havells/M/S Jaquar & Company Pvt Ltd.

S&f Angle bracket 40mm dia for fixing building security light of 40mm dia of 1 mtr long bent to shape 45 degree for fixing of security light including MS clamps of suitable size including nuts, bolts complete all as specified and directed

Excavation in trenches not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in trenches incl. spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50 meter and deposited where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

M&L for cutting of existing GI pipe line 25mm dia for inserting Tee and reducer etc for taking 25mm dia branch pipe including fittings complete

Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 6 sqmm 2 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed.

Material & labour GI tube light grade 40 mm bore for protection of cable complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate with 100mm thick for flooring complete all as specified and directed.

S&F gun metal gate valve 25mm dia, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

M&L for steel water tubing 25mm dia, medium grade galvanised with new fitting laid in trenches or on wall complete all as specified and directed.

S&F switch socket combination 5 in 1, 5/16 Amp Box type with all as specified and directed.

S&F wall mounted voltage stabilizer of capacity 5.0 KVA for automatic operation, single phase naturallyair cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and directed. Make: LG/Samsung/Voltas

Supply and install, testing and commisioning of BEE min 3 star rated Double door refrigerator electric driven of capacity 310 to 360 ltrs DUAL Fridge + TM with inverter Linear compressor, Door Cooling + TM smart suitable for operation on 230 volt, AC single phase, 50 Hz electric supply system complete all as specified and directed. Make: LG/Samsung/Voltas/Whirpool or equivalent as per make approved list

Taking out existing old earting and M&L for new earthing with galvanised steel earth plate electrode 600mmX600mmX6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm dia GI wire protected by 20 mm bore light grade galvanised iron pipe and other end connected to test point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternaterlayers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover 10mm thick hinged to CI frame and 6mm MS rod for handle, necessary excavation and earth wok in hard/dense soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of SSR part-I complete all as specified and directed.

Please Enable Macros to View BoQ information