CERTAIN REPAIR TO OFFICERS JCOS AND OR MD ACCN AT NAINITAL UNDER GE RANIKHET

Amount

BOQ( Sch 'A") B/R Portion Taking down cement plaster from wall/ceiliing on brick / stone masonry surface of any description including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

Demolition of pre-cast PCC black walling / brick work or stone / boulder mesonry including all qoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

Material & Labour for pre-cast cement concrete 1:3:6, type C1 (using 20 mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

All as per item No 3 herein before but except bricks (Note : Serviceable stone obtained from Srl item No 2 shall be reused.)

Material & labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM (1:4) on other than fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as specified

Taking down chowkats or frames n.exc 1.5 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description not exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Material & labour for 2nd class soft wood (CHIR) scantling, clean sawn as in floor / roof of any description in framed or unframed work complete all as specified and directed.

Dismantling of timber fillet, rails, post rafters, purlins, etc. under 40 Sqcm in section unframed or framed work complete all as specified and directed.

Material & labour for 2nd class soft wood ( CHIR) plain fillets rectangular in section, wrought, fixed with nails exc 13 sqcm but n.exc 25 sqcm complete after dismantling of existing complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply & Fixing 40 mm thick 2nd class hard wood (Sal) boarding planed one side with butt joints and fixed with nails as in roofing complete all as specified and directed

Supply & Fixing 25 mm thick 2nd class hard wood (Sal) boarding planed one side with butt joints and fixed with nails as in roofing, ceiiling,partition, fascia complete all as specified and directed

Fixing only boarding any description and 25 mm thickness with and including all necessary fixing, arrangement in any situation complete all as specified and directed. (Note : Old boarding reteived from item No 15 shall be reused.)

Material & labour in repair 12mm thick plywood, grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed

Supply & fixing in repairs laminated flooring 8.3 mm thick hard board planks make BWG Crona, hampshire, Oak both side laminated with decorative surface of make FD spaze, design No. 1890 or its equivalent approved laid above the thermoplastic sheet as in flooring complete all as specified and directed.

Material & labour second class hard wood( SAL) plain, solid, straight chowkats frames, wrought framed, rebated on the solid, rounded or chamfered put together with glue primed at joints complete all as specified and directed

Supply & fixing 35mm thick plain, frame 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

Supply & fixing glazed and skelton shutter open rebated and prepared to receive glass, gauge etc,(with out sash bars) edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a) 2nd class hard wood (Shisham), 35mm thick shutter complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, hickness including Nainital or similar pattern roof covering complete all as specified and directed

Supply & fixing of 0.63 mm thick plain galvanised iron steel (PGI) sheeting including cover gola of same thickness PGI sheet as in Nainital or similar pattern roof covering ( to be provided as per the existing pattern to match with same side by side) fixed with flat iron clip of size 20x3 mm complete all as specified and directed.

Supply & fixing galvanized, corrugated, mild steel sheeting 0.63mm thick with two corrugations side lap, having zinc coating @ 120 gram per sqm on both sides, fixed with L-type or J-type or cranked hook bolt and washers in roofs, walls etc. complete all as specified and directed.

Supply & fixing plain, galvanized, mild steel sheeting 0.80mm thick having zinc coating @ 120 gram per sqm on both sides, as in ridges, valley gutters, drip and straight flashings etc complete all as specified and directed.

Supply & fixing in repairs 150 mm dia galvanished mild sheet eaves, gutter, made of 1 mm thick sheet having zinc coating @ 120 gram per sqm inclusive of both sides, half round with rounded edges complete all as specified and directed

Supply & fixing in repairs 150 mm dia galvanised mild steel sheet heads, square type, flat for eaves gutter 150mm dia, made of 0.80 mm thick sheet having zinc coating @120 gram per sqm inclusive of both sides, half round with rounded edges complete all as specified and directed.

Material & labour flat iron bands, straps, supports, clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe-290 grade-E165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 200 mm long complete all as specified and directed.

Supply & fixing aluminium anodized barrel tower bolts of extruded section length of bolts 200 mm complete all as specified and directed.

Supply & fixing aluminium anodized barrel tower bolts of extruded section length of bolts 100mm complete all as specified and directed.

Supply & fixing butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.

Supply & fixing butt hinges medium weight cold rolled mild steel of 75 mm long complete all as specified and directed.

Supply & fixing extruded aluminium handle, cast type anodized 150 mm size complete all as specified and directed.

Supply & fixing extruded aluminium handle, cast type anodized 125 mm size complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames incl punching or drilling out glazing pins/spring clip and providing and fixing new ones complete all as specified and directed.

Supply & fixing Sheet glass 4mm thick, ordinary quality and glazing with oil putty or fixed with beads in squares n. exc 0.50 Sqm in each pane complete all as specified and directed.

Supply & fixing in repair Sheet glass 5 mm thick, ordinary quality and glazing with oil putty or fixed with beads in squares exc 0.50 Sqm in each pane complete all as specified and directed.

Supply & fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple complete all as specified and directed.

Material and Labour for Preparation of new wooden surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour 350x250x7mm/450x350x7mm thick glazed ceramic tiles coloured, fixed as in vertical surface etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over and including 10mm thick rendering/ screed bed in CM 1:4 complete all as specified and directed.

Material & labour for Non skid ceramic tiles 7 to 8mm thick coloured of area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Material & labour Chequered cement concrete tiles of size 20cmx20cmx25mm thick , set and jointed in neat cement slurry with grey cement and pigment over and including screed bed 20 mm thick in cement mortar 1:6 complete all as specified and directed.

Material & Labour for 25mm thick PCC 1:2:4 type B-1 20mm graded stone as in level course with finshining in cement concrete surface even and rough to receive screed bed complete all as specified and directed.

Material and labour for 75 mm thick cement concrete 1:3:6, type C-1,(using 20mm graded crushed stone aggregate) as in plinth protection/ floor finished even and fair without using extra cement complete all as speciified.

Demolition of PCC of any description in ground floor and paving not exc 15 cm thick ( below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engineer-in-Charge complete all as specified.

Demolition of reinforced cement concrete of any description and in position not otherwise speciifically provided for ( reinforcement cut as required to facilitate demolition) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engineer-in-Charge complete all as specified.

Material and labour cement concrete (1:3:6) type C-1 using 20mm graded stone aggregates as in surface channel or drain etc. including nesessary form work complete all as specified

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

Material & labour for providing pre-cast cement concrete landing, cover slabs for manholes chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded crushed stone aggregate and setting in cement mortar 1:6 including necessary from work complete all as specified and directed.

Material & labour for providing plain cement concrete type C-1, 1:3:6 (using 20 mm graded crushed stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Material & labour mild steel reinforcement TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Dismantling water tanks of capacity exc 500 but n.exc 1000ltrs complete all as specified and directed.

Supply & fixing any colour rotational moulded polythene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity and including 20mm dia ball brass valves, high pressure with polythene float and fly complete, screwed for iron pipe or brass ferrule of complete all as specified and directed.

Supply & fixing in repair 20mm dia ball brass valves, high pressure with epolythene float and fly complete, screwed for iron pipe or brass ferrule of complete all as specified and directed.

Supply & fixing in repair 15mm dia ball brass valves, high pressure with epolythene float and fly complete, screwed for iron pipe or brass ferrule of complete all as specified and directed.

Supply & fixing in repair 25mm dia ball brass valves, high pressure with epolythene float and fly complete, screwed for iron pipe or brass ferrule of complete all as specified and directed.

Supply & fixing 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

Material & Labour cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable pipe and stacking properly at site(s) for re-use, complete all as specified and as directed.

All as per Item No. 63 here–in–before, but for 20mm dia (Bore) complete all as specified and directed.

Supply and fixing Steel water tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No. 65 here–in–before, but for 20mm dia (Bore) complete all as specified and directed.

Supply and fixing in repair plastic seat cover coloured suitable for water closet pedestal pan, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges devices complete all as specified and directed.

Supply and fixing CP wall mixer , complete all as specified and direcated. Make- Zim /jaquar and equivalent make as approved by GE.

Supply and fixing in repair chromium plated brass single hole mixer suitable for wash hand basin as per cat part no. QS-02 of ESS ESS or equivalent cat part in Make MARC, Jaquar as approved by the GE complete all as specified and directed.

Supply and fixing in repairs 15 mm bore chromium plated, fancy type bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing in repairs 15 mm bore fancy type, chromium plated stop vlave cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing in repair pillar tap 15mm dia cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without letters ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified .

Supply and fixing in repair 32 mm size (dia of discharge pipe) waste coupling of PTMT half of full threaded (minimum weight 45 gram) complete all as specified and directed.

Supply and fixing in repair 15mm bore angle stop valve chromium plated fancy type cast copper alloy , screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified .

Supply and fixing in repairs health faucet with 1.5 m long chromium plated flexible cord with hooks complete all as specified and directed.

Supply & Fixing in repair Grating 100mm dia of PTMT ( Minimum weight 25 gms) complete all as specified and directed.

Supply & fixing in repair polymer white (Polypronylene Delrin and ABS) low level flushing cistern 10 ltr capacity valve less syphonic action type, complete with inlet, ball valve float valve bends, brackets, flush pipe, brass screws, handle etc, complete having BIS description mark with IS:7231 including taking down of existing low or high level flushing cistern any capacity and S & F of 32 mm dia PVC flush pipe suitable length and making all connection and making good distrubed surface complete all as specified and directed.

Supply & fixing in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity exc. 1000 ltrs and not exc 2000 litres complete all as specified

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity exc. 500 ltrs and not exc 1000 litres complete all as specified

Supply & Fixing in repairs vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lcement concrete, type B-1 using 20mm graded crushed stone aggregate, min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

Supply & fixing in repairs vitreous china wash down water closet pan (padestal pattern) white with flush pipe of chromium plated brass 32mm dia for low level flushing cistern including plastic water closet seat white with jet, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed in repairs complete all as specified and directed.

Supply and fixing vitreous china wash basin, white flat back, size 550x400mm excluding taps, waste, chain and plug & porcelain stopper but including brackets fixed in repairs complete all as specified.

Material & labour Rubber or vulcanite plugs (waste) with rings and fitting and fixing brass union 32mm dia

Supply & fixing PVC waste pipe32mm dia 600mm long for WHB and kitchen sink complete all as specified and directed.

Supply & fixing in repair 6 mm thick veneered decorative plywood grade 1 (with BWR resin) with decorative face both faces and fixed with screws to timber framework complete all as specified and directed.

Dismentaling of wall and ceilling boards (fiber, pulp, insulation etc.) or insulation board / stabs / blankets, any thickness including cover fillet complete all as specified and directed.

Supply & fixing GI frame work powder coated for seamless/made in panels (605 x 605 mm) ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed.

Material and labour 4 mm thick Non asbestos fibre cement building board (E-board classic) fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Supply & fixing in repair PVC tiles / sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors thickness in 1.50 mm complete all as specified and directed.

Material & labour for two coats of cement base paint on newly plaster surfaces of wall including preparation of surface complete all as specified and directed.

Material & labour for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer of chalk whiting complete all as specified and directed.

E/M Portion Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc and making good disturbed surfaces of walls etc, as per existing finishes by plastering, repairs and white / colour/ distempering etc complete all as specified and directed

Supply & fixing point wiring for one light point/ fan point/ bell point / 5Amps socket out let (independent)point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed ( Note:- wiring shall be done in colour coding)

All as per item No 95 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No 95 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 2.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

Suppy & fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Suppy & fixing switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & fixing socket out let 2 in 1, 3 pin 5 Amps, flush type complete all as specified and directed.

Supply & fixing socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply & fixing lamp holder, PVC / polycorbonate type insulated body with back plate suitable for batten / angle fitting complete all as specified and directed

Supply and fixing of bell push button type single pole one way 5 Ampere complete all as specified and directed

Material & labour ceiling rose, 3 phase / PVC / polycarbonate, isolated boldy complete all as specified and directed.

Supply and fixing Modular Switch1 way 10 Amp, 1 module complete all as specified and directed.

Supply and fixing Modular Switch1 way 16 Amp, 1 module complete all as specified and directed.

Supply and fixing Modular socket shuttered, 6 Amp, 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing Modular socket shuttered, 6/16 Amp, 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing Bell push module type single pole 6 amps complete all as specified and directed.

Supply and fixing white cover plate with frame 3 module complete all as specified and directed.

Supply and fixing white cover plate with frame 4 module complete all as specified and directed.

Supply and fixing modular metal flush box three module complete all as specified and directed.

Supply and fixing modular metal flush box Four module complete all as specified and directed.

Supply and fixing of call bell, AC, 230 volts, single pole over and inclduing pressed PVC rectangular block box of size 175 x 100 x 50mm deep duly covered with 3 mm thick bakelite sheet complete all as specified and directed

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing isolator SPN 240 volts, 40 Amps, 10 KA complete all as specified and directed .

Supply & Fixing isolator SPN 240 volts, 63 Amps, 10 KA complete all as specified and directed .

Supply & Fixing isolator SPN 415 volts, 100 Amps, 10 KA complete all as specified and directed .

Taking down carefully by disconnecting and unscrewing from boards / out let boxes electric meters upto 25 Amps and reflxing / connecting the same inclduing sealing to the electric meter with sealing wire and lead table complete all as specified and directed

Supply & Fixing service connection with flat twin core 10 sqmm PVC sheathed cable with aluminium multi-stranded conductor drawn into PVC conduit (ISI Marked) not less than 20 mm dia from service bracket to main switch including connection etc complete all as specified and directed.

Taking down carefully old unserviceable service connetions (cable) of any size on hander or on battens or in conduit, any type, any pattern complete all as specified and directed.

Supplying and fixing 1100 volts grade cable PVC insulated heavy duty aluminium multi-stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire from pole to service bracket, one 10 sqmm twin core cable flat or circular complete all as specified and directed

Disconnection and taking down of exhaust fan 250 / 300 mm sweep of any type rewinding, varnishing of armeture / plate replacing of carbon bushes and complete overhauling of exhaust fan including two coats of synthetic enamel paint on entire fan and refixing on the same opening all as specified and directed

Taking down and refixing Geyser after repair/replacement of assembly with element, Thermostate, painting including welding, with fixing arragement and 02 Nos PVC connection 15mm size with PTMT nuts, of 450 mm length heavy duty for hot water complete all as specified

Supply & fixing LED tube light fitting. ,1x22w,T5, Energy Saving chennel suitable for LED lamp with standared fitting etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. .

Supply & fixing in repair geyser elements 1500 watts ( triangular type) complete all as specified and directed. .

M/s RK JOSHI&SONS

D. S. MAHARA