Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹12.7 L+₹2,655 (0.21%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | Rejected-Technical | - | Rejected-Technical Bidder did not submitted hardcopy of technical bid documents as per nit clause. |
| Sl No | Description | Qty | Unit | DEBASISH PAUL CHOWDHURY L2 | Consultive Erectors L1 |
|---|---|---|---|---|---|
| 1.00Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||||
| 1.10For fixed portion | |||||
| 1.20 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | 652 | kg | 600 ₹3,91,200 | 580 ₹3,78,160 Lowest |
| 2.00For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). | |||||
| 2.10 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | 201 | kg | 600 ₹1,20,600 Lowest | 600 ₹1,20,600 Lowest |
| 3.00Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | |||||
| 3.10 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. | 47.3 | sqm | 3,000 ₹1,41,900 | 2,900 ₹1,37,170 Lowest |
| 4.00Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||||
| 4.10 | With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) | 42.8 | sqm | 150 ₹6,420 Lowest | 170 ₹7,276 |
| 5.00 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | 6 | each | 1,500 ₹9,000 Lowest | 2,000 ₹12,000 |
Tender Value
₹12.7 L
EMD Value
₹25,391
Closing Date
16 Sept 2026, 11:00 amClosed
EXECUTIVE ENGINEER CIVIL I/C
ENGINEERING SECTION, ASSAM UNIVERSITY SILCHAR
Renovation works including providing and fixing Aluminium partition, shelves (plywood) for laboratories, painting etc at Department of Microbiology at Assam University, Silchar, Assam.
2026_AUS_925463_1
AU/ENGG/MAINT/CIVIL/08/2022
Open Tender
Civil Works
Works
45 days
ASSAM UNIVERSITY SILCHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
Assam University Silchar
₹25,391
30 Sept 2026
9 Sept 2026
17 Sept 2026
9 Sept 2026
16 Sept 2026
9 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||||
| 1.1 | For fixed portion | - | - | - | - |
| 1.2 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | 652 | kg | 1 | ₹652 |
| 2For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). | |||||
| 2.1 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | 201 | kg | 1 | ₹201 |
| 3Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | |||||
| 3.1 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. | 47.3 | sqm | 1 | ₹47.3 |
| 4Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||||
| 4.1 | With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) | 42.8 | sqm | 1 | ₹42.8 |
| 5 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | 6 | each | 1 | ₹6 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
BOQ_972515.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .