CONSTRUCTION OF RAMJI CHORO AT TALALA DIST. GIR SOMNATH (2nd Attempt)

NAME OF WORK: - CONSTRUCTION OF RAMJI CHORO AT TALALA DIST. GIR SOMNATH (2nd

SR. NO. DISCRIPTION AMOUNT

SCHEDULE CONSTRUCTION OF RAMJI CHORO AT TALALA DIST. GIR SOMNATH

B-1 UNDER SJMMSVY 2025-26 SCHEME

I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount

mentioned above.

Tendered amount put to tender Rs. 32,67,673.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

President, Chief Officer

Signature of Contractor. Talala Nagarpalika Talala Nagarpalika

TALALA NAGARPALIKA -TALALA

NAME OF WORK :- CONSTRUCTION OF RAMJI CHORO AT TALALA DIST. GIR SOMNATH

UNDER SJMMSVY 2025-26 SCHEME (2nd Attempt)

Description Qty Unit Rate Amount

1 Excavation for foundation up to 1.5 Meter depth including

sorting out and stacking of useful materials and disposing

of excavated stuff up to 50 Meter lead (a) For Loose or Soft

soil 17.07 cum 128.79

2 Excavation for foundation up to 1.5 Meter depth including

sorting out and stacking of useful materials and disposing

of excavated stuff up to 50 Meter lead (b) Dense or hard

soil 17.07 cum 164.64

3 Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(C) Hard Murrum 17.07 cum 281.73

4 Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(D) Soft rock not

requiring Blasting 17.07 cum 289.40

5 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

exceeding 20 cm. In depth consolidating each deposited

layer by ramming and watering 30.72 cum 137.47

6 Filling in foundation and plinth with murrum or selected

soil in layers of 20 cm thickness including watering,

ramming and consolidating etc. complete. 0.30 cum 307.41

7 Providing and laying cement concrete 1:2:4 (1 cement : 2-

coarse sand : 4- graded stone aggregate 20 mm. Nominal

size) and curing complete excluding cost of form work in :

(a) Foundation 5.69 cum 3842.91

8 Providing and laying cement concrete 1:3:6 (1 Cement : 3-

coarse sand :6- crushed stone aggregate 40 mm. Nominal

size) and curing complete excluding cost of form work in

:(a)plinth 20.78 cum 3281.49

9 Providing and laying controlled cement concrete M.250

and curing complete including the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

concrete. (upto 10 ton) RCC Column Footing 14.09 cum 4913.65

10 Providing and laying controlled cement concrete M.250

and curing complete including the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

concrete. (upto 10 ton) Column Up to Plinth level 0.40 cum 6763.97

11 Providing and laying controlled cement concrete M.200

and curing complete including the cost of formwork and

reinforcement for reinforced concrete work in (D)

Columns, Pillars posts and struts upto floor two level. (upto

10 ton)RCC Column GF 7.38 cum 7123.53

12 Providing and laying controlled cement concrete M.250 10.32 cum 6835.68

and curing complete including the cost of formwork and

reinforcement for reinforced concrete work in (C) Slabs,

landing, shelves, Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level. (upto 10 ton) Plinth Beam

13 Providing and laying controlled cement concrete M.200

and curing complete including the cost of formwork and

reinforcement for reinforced concrete work in (C) Slabs,

landing, shelves, Balconies Lintels, Beams, Girders and

Cantilever upto floor two level. (upto 10 ton) RCC Floor

Beams at Slab lvl. Ground Floor 27.51 cum 6122.62

14 Providing laying Controlled cement concrete M-200 and

curing complete including the cost of form work and

excluding cost of reinforcement for reinforced concrete

work in : RCC Lintels Ground Floor 0.79 cum 6158.98

15 Providing laying Controlled cement concrete M-200 and

curing complete including the cost of form work and

excluding cost of reinforcement for reinforced concrete

work in : RCC Slabs & Landings Ground Floor 42.30 cum 6923.55

16 Providing laying controlled cement concrete M-200 and

curing complete including the cost of form work and

excluding cost of reinforcement for reinforced concrete

work in : RCC Chhajja Ground Floor 0.29 cum 7218.47

17 Providing TMT Bar FE 500/500D reinforcement for R.C.C.

work including bending, binding, and placing in position

complete upto floor two level. Ground Floor 12436.40 Kg. 77.29

18 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

superstructure above plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(B) Conventional 63.09 cum 4640.76

19 Providing 15 mm thick cement plaster in single coat on fair

side Brick/concrete walls for interior plastering up to floor

two level and finished even and smooth in & Extra over

items for finishing with a floating coat of neat cement

slurry. (ii) Cement mortar 1:4 ( 1 cement : 4 sand) Ground

Floor 288.06 Sqm 233.26

20 Providing 10 mm thick cement plaster in single coat on

ceiling and soffit of stair for interior plastering up to floor

two level and finished even and smooth in & Extra over

items for finishing with a floating coat of neat cement

slurry for plastering on ceiling and soffits of stairs up to

floor two level instead of plastering on walls. (ii) Cement

mortar 1:4 ( 1 cement : 4 sand) Ground Floor 270.20 Sqm 205.61

21 20 mm thick sand faced cement plaster on walls upto

height 10 meters above ground level consisting of 12 mm

thick backing coat of c.m. 1:3 (1:cement - 3:sand) and 8 mm

thick finishing coat of c.m. 1:1 (1:cement - 1:sand) etc.

complete 313.80 Sqm 358.72

22 Providing and laying Polished Granite slab (18mm thick)

slab flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-Coarse sand) or L.M. 1:1.5 laid

over and jointed with grey cement slurry including rubbing

and polishing complete (Basic Granite rate shall be

250/Sft) (A) Granite slab 18mm thick 22.50 Sqm 4229.48

23 Providing and laying Polished Granite slab (18mm thick) is

riser of steps dedo and pillars laid 10mm thick cement

mortar 1:3 (1-cement : 3-coarse sand) and jointed with

grey cement slurry including rubbing and polishing etc.

complete (Basic Granite rate shall be 250/Sft) 14.50 Sqm 4371.91

24 P & L 24" x 24" vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

flooring and jointed with colour cement slurry including

finished with flush pointing & cleaning the surface etc.

complete for antiskit (upto 10 ton) 234.14 Sqm 1472.91

25 Providing and laying broken china mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to

be tempered to bring mortar crème out up to surface using

white cement including rounding off junctions and

extending them up to 15cm along the wall clearing with

water and oxalic acid etc. as directed 152.20 Sqm 779.70

26 Providing and fixing 35 mm thick shutters for doors,

windows and clerestory windows and including Indian

teak wood frames 12 cm x 7 cm. size including anodized

aluminium fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc,

complete. (ii) Fully Panelled. 10.37 Sqm 5533.68

27 Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg /

Rmt), horizontal two track member size 61.85 mm x

mm x 1.20mm (of Jindal Section no: 8687 @ wt.of

Kg/mt), vertical member of size 61.85 mm x 31.75mm x

1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt)

shutters of horizontal member size 40mm x 18mm x

1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),

vertical member of size 40mm x 18mm x 1.29mm (of Jindal

Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.

0.457 Kg/mt) with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window. 3.60 Sqm 1713.70

28 Applying two coats of Birla or Asian acrylic lapy

(putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth. 558.30 Sqm 40.59

29 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth. 288.10 Sqm 86.79

30 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth. for ceiling and Soffit 558.30 Sqm 92.58

31 Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials. etc

complete 313.80 Sqm 122.14

32 Providing and fixing to wall ceiling and floor 1.0kg. F/cm2

working pressure polythene pipes of the following outside

Dia. Low density, complete with special falnge compression

type fittings, wall clips etc. including making good the wall

ceiling and floor. (F)50mm 15.00 Rmt 280.23

33 Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws. (A) Plain Grill. 161.00 Kgs. 111.29

34 Applying priming coat over new steel and other metal

surface after and including preparing the surface by

thoroughly cleaning, oil, grease, dirt and other foreign

matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing

red lead. 16.08 Sqm 38.50

35 Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the

surface an even shade including cleaning the surface of all

dirt, dust and other foreign matter. 16.08 Sqm 96.59

36 Point wiring for Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic box, single

mounting base frame covered with textured / metallic

front plate modules erected on / in wall / ceiling with

following type accessories Cat. II 20.00 Point 236.34

37 Point wiring for Light / Bell with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in/ on

surface on wall/ceiling complete with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.

Connector as directed.

(f) With medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. II 21.00 Point 465.61

38 Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multistrand copper wires, in following type

of pipe to be erected concealed in / flushed on wall/ceiling

complete with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator(2M) with

separately mounted and accessories with earth continuity

of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected. With necessary ceiling rose / H.D. Connector as

directed.(f) With medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Cat. II 6.00 Point 654.48

39 Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in following type

of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. II 4.00 Point 493.89

40 Providing following type of Modular Type Accessories

mounted with pvc / metallic / Wooden box, single

mounting base frame covered with textured / metallic

front plate, modules erected with necessary connection. As

desired by Engineer In charge (7) Blank Plate Single

Cat. III 10.00 Each 236.34

41 Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA powder coated

and high U.V. & corrosion resistance with diffuser and/or

Polycarbonate optics with company mark/name 120 to

300 V, Power Factor more than 0.9, THD < 10 %, CCT

K to 6500K, Uniformity ratio >0.7, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85 % CREE / OSRAM

/ PHILIPS Lumileds / NICHIA / SEOUL/ Bridge lux (U.S.A.)

make LED used for luminaire. ( fitting required LM-79 &

LM-80 Certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings. The Engineer in

charge may select any wattage capacity between the ranges

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet 16.00 Each 165.64

42 Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA powder coated

and high U.V. & corrosion resistance with diffuser and/or 2.00 Each 758.51

Polycarbonate optics with company mark/name 120 to

300 V, Power Factor more than 0.9, THD < 10 %, CCT

K to 6500K, Uniformity ratio >0.7, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % CREE / OSRAM

/ PHILIPS Lumileds / NICHIA / SEOUL/ Bridge lux (U.S.A.)

make LED used for luminaire. ( fitting required LM-79 &

LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings. The Engineer in

charge may select any wattage capacity between the ranges

shown.)(A )Square/ Circular Surface/Recessed Mounted

Downlight with provision for spring loaded mounting clips

complete. (A) 22-24 watts, Surge-2 KV Cat. III

43 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with bus

bar, neutral link, earth bar and DIN rail, confirming to IS

13032 and BS 5486-1986 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used)

(E) Single phase 8 way single door 2.00 Each 702.96

44 providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed (i) 25 Amps. DP

CAT-ll 2.00 Each 1627.11

45 Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (a) 20 mm 120.00 Mtr. 24.24

46 Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (c) 32 mm 25.00 Mtr. 54.54

47 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free G.I. Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of

25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications.(b)For Electrical installation up to 11 KV in

normal soil.Length of Pipe: 2.00 mtrs Back filling

Compound: 1 no. Bag of 25 Kg. 2.00 Each 5760.03

48 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free G.I.Pipes having Outer pipe dia of 8.00 Kg. 77.77

50mm having 80-200 Micron galvanising, Inner pipe dia of

25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications. Providing and erecting HOT deep Galvanised

iron strip wire 8 to 16 SWG.

49 Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cms. down rod erected with 24/ 0.2, 3 core flexible wire

with earthing.(Make shall be approved by Engineer in

charge) 6.00 Each 1948.29

50 Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

earthing. 6.00 Mtr. 108.07

51 Supplying & erecting fan hook box of 10 mm M.S. round

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty PVC

box complete erected concealed in Ceiling with necessary

finishing. 6.00 Each 108.07

52 Providing 2.5mm.thick laminated acrylic sheet to cover the

fan hook or Fan box 6.00 Each 18.18

53 Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (a)

wire 1.5 sq. mm 30.00 Mtr. 62.62

54 Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (b)

wire 2.5 sq. mm 30.00 Mtr. 82.82

55 Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 60.00 Mtr. 112.11

56 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel

board necessary IP-42 protection & above as per

requirement made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary supporting angles, flats Sq

including cutting, bending, drilling, welding, riveting with 2.00 Mtr. 10468.65

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied

switch gears, BUSBARS, with suitable size of inter

connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, Bakelite control fuses for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket, heavy duty

end terminal connection complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall

be supplied with following approved manufacturers with

following size. (A) The standard companies switch gear

shall be used and only manufacturers at CPRI approved

factory for beneficial use. (i) with 350mm depth

57 Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr. per hour @ an

ambient temp of 450 C. The outlet temp. of the water

should drop by 150 C within a hour, The water cooler

should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete with

necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel. 1.00 Each 49559.69

58 Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame,

prefilter housing with 'O' ring presediment filter GAC filter,

carbon filter suitable buster DC pump capacity 80 psi,

mention with 40 Osg inline type post carbon filter auto low

& high pressure switches with following size of storage

tank & LPH capacity & erected as directed with one year

comprehensive maintenance guarantee.[B] 25 Ltr / Hr with

30 Ltr. S.S. Pressure Tank 1.00 Each 15620.66

/We am/are willing to carry out the work at % above/below percent (should be written in figuresand words) of the tendered amount

mentioned above.

Tendered amount put to tender Rs. 32,67,673.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

President Chief Officer

Signature of Contractor. Talala Nagarpalika Talala Nagarpalika