Construction of Toilet block at foot hill Sri Venkateswara Swamy Temple, Ananthavaram (V), Thullur (M), Guntur District

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational,incidengal,labour charges such as shoring,sheeting,planking,strutting etc., complete for finished item of work including Ordinary soil-Manual means upto 3m depth.

Excavation in hard rock (Blasting prohibited) with rock breakers including breaking rock loading in tipper and disposal with initial lift of 3.00 m and lead up to 1000mt trimming bottom and side slopes in accordance with requirements of lines grades and cross sections as per technical specifications clause 302.3.5 MORD/301MORTH.Mechanical Means (With all lifts)

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

Filling of foundations and basement with good gravel in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Plain Cement Concrete(1:4:8) using 40 mm ( 0..54 Cum), 20mm (0.27 Cum) and 12 mm (0.09 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as mixing, laying concrete, curing etc.,complete for finished item of work.

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cum (707 Kgs),. 10 mm HBG crushed metal, 0.362 cum (471 Kgs) , sand 0.407 cum (616 Kgs.) and cement 380 Kgs with water cement ratio of 0.48 ( 182.40 lts/ cum of CC)etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but including cost of centring, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).

Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M25 grade concrete is 380 Kgs/Cum and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates.

Raft & footings

For Plinth beams

-do- Columns up to basement

-do- Columns in F.F

Lintels in First Floor

Supply and fixing High Yield Strength deformed (HYSD)/ Thermo mechanically treated (TMT) steel bars of Fe 500 grade (as per IS 1786 - 1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).

Construction of Brick Masonry in C.M (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

-Do- Upto Basement

Construction of 110 mm thick Brick partition walls in C.M(1:5) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. complete

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions.

-do- in C.M(1:5) 12 mm thick floor -I

-do- in C.M(1:5) 20 mm thick , Floor-1 ( OUT SIDE)

Flooring with Antiskid floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality of all series& shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work.

Finishing the sides of walls with Ist quality glazed red or white fully body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 and thickness 6 mm wall tiles of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls).

Supply and fixing PVC 10mm wide edge beeding including cost and conveyance of all materials and incidental charges etc.,complete.

Flooring with cement concrete floor tiles of 25 mm thick of following sizes set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300 X 300 x 25mm of any shades.

Supply of Telephone Black Granite 18-20 mm thick upto 2.43M

Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same

Supplying and fixing in position M.S. Ornamental grills for windows and ventilators or for verandah openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending, fabrication, welding grinding and finishing smooth including painting the grills with two coats over a primary coat(total three coats) with synthetic enamel paint of approved make and colour including cost of making holes in RCC or masonry works and making goos the same where ever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

painting to new walls with 2 coats over a primary coat ( total three coats)of acrylic interior emilsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade after throughly brushing the surface to removal all dirt and remains of loose powdered materials , including cost and conveyance of all materials to work site and all operational , incidental , labour charges retc, complete for finished of work as per SS911 for internal walls

Painting two coats Acrylic emulsion paint exterior grade over a Cement primer exterior grade - 2 (Total Three coats) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556-Part-2-1973 of Hind ware/parryware make white glazed with 'P' trap with ISI mark or equivalent approved by the department.

Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 8 Litres capacity single Flush.

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap 580mm x 440 mm Hindware/ Parryware/ Neycer - ISI Mark

Supplying & Fixing white glazed flat back half stall urinals 1st quality confirming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm confirming to IS:2556 - Part 6, Sec-6-1974 fixed with screws complete Indian make with ISI mark or equivalent approved by the department. -590 x 375 x 390 mm

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock

Supply of 110 mm dia 3 M Single socket pipe PVC /SWR pipes & fittings ( as per ISI standards) 6kg/cm2 (Type-B).

Supply and fixing of 160 MM dia 3 M Double Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince / Sudhakar / Kisan / Supreme or any ISI Brand.

Supply and fixing of PVC 4" (101.6 mm ) Floor Trap with jali etc.,complete.

Supplying and fixing of wall mirror (TV shape) with plastic frame size 609.6 x 457.2 mm including cost , incidental charges etc., complete

Supply and fixing 25.4 mm dia & 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws

Supply & Fixing of NP coat Hook

Supply and fixing of Ashirvad/Ajay/Astral Flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D-2846 and are produced in CTS (Copper tube sizes 1/" to 2" Ashirvad Flowguard SDR 11 to 13.5 pipes are made from identical CPVC compounds having the same physical properties for Hot and Cold water (IS 15778: 2007).

- do - of 34.90 mm dia OD pipe SDR 13.5

- do - of 22.20 mm dia OD pipe SDR 13.5

- do - 15.90mm dia OD pipe SDR 13.5

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type

-do- 32 mm nominal dia

-do- 25 mm nominal dia

-do- 20 mm nominal dia

S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make

S & F CP Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian make

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebate of 32MM

Door Frame section of 45x90 MM . The two Vertical members are to be joined together with the horizontal member using 8x60 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Door Frame section of 63.5x100 MM .The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top andbottom rigid layer with an overalldensity of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame.

Supply and fixing of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Zinc coating Z150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end of 15 cms etc., complete as directed during execution.

Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L- Flashing, Down Pipes, Gutter etc., with 0.47mm thick, Width: 0.585, Length: Maximum 2½ Meters

Supplying, fabrication and placing in position of M S truss work by usin MS tubes & Pipes of requried dia as per ISI-1161 including cost of labour charges for fabricating are heavy steel works like trusses, stanchions, heavy beams & girders including cost of welding rods, power charges & labour charges for fixing in position & including painting the pipes with two coats of synthetic enamel paint over a primary coat of Red oxide metal primer) (total three coats ) of approved make and colour including cost and conveyance of are materials, incidental charges etc., complete.

Providing weld mesh enclosures made out of M.S ' L ' angles of size 25 x 25 x 5mm for outer frame, M.S. ' T 'section of size 25 x 25 x 5mm for central vertical mullion and fixing the 7 G x 11 G weld mesh with openings of size 75mm x 25mm to the frame by using M.S. flat of size 25 x 5mm by means of M.S. bolts and nuts including fixing the frame in position by making holes in walls / R.C.C. fin walls and making good the same and finishing smooth etc., complete as directed during the execution.

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution