CSR Funds

Repairs and Restoration to the motors, pumps and pipelines of water distribution network in Domalpenta Village of Amrabad Mandal, Nagarkurnool District

Construction of 30 KL OHSR for finished work including 2 coats with VRCC M30 painting,lettering, fixing of all required fixtures, pipes, bends, valves, etc. complete as per departmental designs and drawings.Fixtures include:a) S.S 303 ladder inside 0.60 m wide. b) spiral staircase on the outside shall be provided upto 200KL ELSR. Above 200KL ELSR Capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S 303 railing upto 1.0 height. c) Lightening arrestor, including conductor and earthing etc with relevant IS codes. d) RCC ventilators with copper or stainless steel fly proof mesh. e) D.I Manholes frame and cover 0.60 x 0.60 m as per IS specifications - 2 Nos. f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No. g) Minimum staging for all ELSR/OHSR shall be 12.0mts. h) The increase in staging shall be at 1.0mt interval. i) The railing provided to the gallery and staircase shall be with stainless steel of grade 303 for a height of 1mts j)The railing provided to the gallery and stair case shall be with stainless steel of grade 303 for a height of 1.20mts. k)The dog legged staircase shall be enclosed with brick / CRS wall on three sides and front side with PVC door of standard maker up to 1st brace level from ground level to prevent unauthorized entry. l) D.I swan neck ventilators shall be provided in top dome and slab. M30grade

Supply ,delivery and fixing of Ductile iron specials

Inlet connections

(80mm) D/F pipes - 2m. Long

(80mm) Duck foot bends

(80mm) Bell mouths

Outlet connections

(100mm) D/F pipes - 2m. Long

(100mm) D/F pipes - 1.0m. Long

(100mm) Duck foot bends

Scour connections

(80mm) D/F pipes - 2m. Long

(80mm) D/F pipes - 1.0m. Long

(80mm) Duck foot bends

(80mm) Semicircular bend

Overflow connections

(100mm) D/F pipes - 2m. Long

(100mm) Bell mouths

(100mm) Duck foot bends

Sluice valve for Outlet(100mm)

Sluice valve for Scour(80mm)

S& F of GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

50 mm dia GI PIPE Class-B

Manufacture, Supply and delivery of DI D/F Gate Valves PN 16 (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept.

50 mm gate valve on 50 mm GI pipeline

Providing 15mm dia House service connection as per standard specification including the cost of the materials like Clamp Saddle/ Electro fusion Saddle confirming to prEN 12201-3, Manufactured from virgin resin of PE-SO/PE-100 with FLOW CONTROL VALVE (5 LPM @5m head), Compression Elbows, MOPE PESO Blue Pipe & Supplying and and including cost of 15mm dia meter brass body CP finish bib tap of BIS standard etc including GI verticals complete for finished item of work and Fixing of of GI Pipe including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line

Supply of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours

Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L-Flashing, Down Pipes, Gutter etc., with 0.47mm thick, Width: 0.585, Length: Maximum 2½ Meters

Supply of Structural Steel hollow Square & Rectangular sections of 240 MPA grade conforming to IS 4923-1997 including loading, transportation and unloading charges

G.I Bolts / Nuts and Washers

Total (Rupees Thirty Nine lakh Eighty Two thousand forty four Only)

Signature of the Tenderer