Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC | L1 | Accepted-AOC being a 1st lowest | |
| 2 | L2₹19.5 L+₹92,757.47 (5.00%)Rejected-Finance WARD NO 6 LOWER DHALPUR DISTT KULLU HP | L2 | Rejected-Finance Being a 2nd Lowest | |
| 3 | L3₹21.6 L+₹3.0 L (16.2%)Rejected-Finance ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | L3 | Rejected-Finance Being a 3rd Lowest | |
| 4 | L4₹22.5 L+₹3.9 L (21.2%)Rejected-Finance | L4 | Rejected-Finance Being a 4rth Lowest | |
| 5 | L5₹22.5 L+₹3.9 L (21.3%)Rejected-Finance S O SH BHAWANI SINGH VPO BHRAIN TEHSIL BHUNTAR DISTT KULLU HP PIN 175125 | KULLU | HIMACHAL PRADESH | 175125 | L5 | Rejected-Finance Being a 5th Lowest |
Tender Value
₹23.2 L
EMD Value
₹46,000
Closing Date
7 Apr 2026, 6:00 pmClosed
Er. B.C. Negi
Executive Engineer, Kullu Division, HP.PWD, Kullu
Special Repair of Sports Ground Kullu (SH- Providing and laying Kota Stone flooring Steel work and P/L water line around etc
2026_PWD_132795_1
PW/KD/TA/2025-26-15984-91 dated 27.3.2026
Open Tender
Civil Works - Others
Percentage
60 days
Kullu
As refer to bid document
9 documents required · 9 mandatory
₹500
₹46,000
30 Jul 2026
30 Mar 2026
8 Apr 2026
30 Mar 2026
7 Apr 2026
30 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing cement concrete manually /by mechanical means including disposal of material with in 50 metres lead as per direction of Engineer-In -charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix), with in all leads and lifts of materials as per direction of Engineer-In-Charge. | - | Per Cubic metre | 1,643.15 | - |
| 2 | Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, any dressing removal of stumps and other deleterious material and disposal upto any lead of 50 mtr (Fifty metre) and lift complete including dressing of sides and bottom and backfilling in trenches with excavated material in ordinary soil within all leads and lift of materials and as per direction of Engineer-in-charge. | - | Per Cubic metre | 445.35 | - |
| 3Steel work welded in built up section /framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required .In gratings, frames ,guard bar, railings, brackets, gates and similar works. with in all leads and lifts of materials as per direction of Engineer-In-Charge. | |||||
| 4 | Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering -All work upto plinth level -1:3:6 (one cement :three sand :six graded stone Agg.40 mm nominal size) with in all leads and lifts of materials as per direction of Engineer-In-Charge. | - | Per Cubic metre | 6,543.75 | - |
| 5Kota stone slab flooring over 20 mm ( twenty millimetre average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( one cement : four coarse sand) : 25 mm (twenty five millimetre) thick with in all leads and lifts of materials as per direction of Engineer-In-Charge. | |||||
| 6 | Kota stone slabs 20 mm (twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimetre average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.with in all leads and lifts of materials as per direction of Engineer-In-Charge. | - | Per Square metre | 1,550 | - |
| 7 | Providing and fixing high duty 3(three) layer PP-R(Poly Propylene Random opolymer) pipes conforming to IS:15801, UV stabilised & anti -Microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fitting, I/c fixing the pipe with clamps at 1.00 m (one metre) spacing. This includes the cost of cutting chases and making good the same including testing of joints complete PN-16 pipe 32 mm OD (SDR-7.4), with in all leads and lifts of materials as per direction of Engineer-In-Charge. | - | Per running metre | 425.6 | - |
| 8 | Providing and fixing C.P brass bib cock of approved quality conforming to IS standards andweighing not less than 810 gms (Eight hundred and ten grams).15 mm (fifteen millimetre) nominal bore ,with in all leads and lifts of materials as per direction of Engineer-In-Charge. | - | Each | 937.15 | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.74 MB
BOQ_196358.xls
BOQ • 0.28 MB
sbd.pdf
Tender Documents • 2.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .