Electrical work for Development of Surya Temple Katarmal Almora under Manas Khand Mandir Mala Mission (Phase-I)

Amount

Wiring for light point/ fan point/exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc as required. Group-B (Primary point )

Wiring for group controlled (looping) light point /fan point / exhaust fan point/call bell point (without independent switch etc) with 1.5 sqmm FRLS PVC insulated copper conductor cable in surface/recessed PVC conduit and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc.as required. Group-B(looping point )

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

……Do………but size 2 X 4 sq. mm + 1 X 4 sq. mm earth wire .

……Do………but size 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

……Do………but size 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying and fixing of following sizes of MEDIUM CLASS PVC conduit along with accessories in surface/recess,or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

……Do………but size 32 mm

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 32 amps DP

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25/32 amps

S/F of Inground LED Light(12w)

S/F of LED STEP LIGHT IP 65 Rated, (3W).

S/F of SPIKE LED LIGHT (7W)

S/F of FLEXI STRIP LIGHT. 4Mtr.length (10W/MTR.)

S/F of FLOOD LIGHT MINI (WALL/FLOOR MOUNTED)12W/20W

S/F of DECORATIVE WALL BRACKET INVERTED(20W)

SITC BOLLARD LED LIGHT(12W)

SITC of Lighting Pole, Ht.3660mm. Supply of 3660mm Bishop pole made of circular mild steel pipe (grade YST 210) 88.9mm Dia x 2.9mm thick with 3648mm Height. Decorative base made of Gravity Die-cast aluminium (310mm Dia x 562mm Height). Pole section welded by certified welders using high end MIGwelding processes. Thecontrol gear tray is prewired with 2.5 Sq.mm cable,6A MCB. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 200mm Square x 12mm thick Steel of gradeE250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 300mm bolts of grade 4.6 at CC140. The base plate have a cable entry hole of 70mm dia at the center. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with zinc rich primer & pure polyester powdercoating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options

SITC of All-in-one solar post-top lantern light fixture with in-built panel & LiFePo4 battery, 2.8Ghz motion sensor, system efficacy>165lm/watt, system wattage: 12-25 W with system lumen of 3000lm, Sensor Delay time: 18sec, Sensor Detection Range: Range 4~5 meters, Angle +/-75'C, Instation Height: 3~4meters, Housing material: PC, IP65, Pole mounting dia: 60mm, Size (LxWxH): Ø420*123 in mm, weight: 1.2kg, Operating temperature range (℃): 0~55DegC, ambient temp: 25DegC, Operating relative humidity range (%): RH 90%, cool grey colour finish

SITC HIGH Pole Decorative Pole Light 50W LED

SITC of Input power : 3 x 3W LED Bollard luminaire designed for surface mounted. Symmetrical light distribution. Luminaire made of extruded aluminium tube and non corrosive stainless steel fasteners. Clear acrylic rod. Extruded aluminium mounting base & Pressure die cast aluminium mounting plate 167mm diameter x 4mm thick with 4 elongated holes 20 x 14 to suit M12 bolts at PCD 110 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Protection class IP65. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 2700K / 3000K ( Special CCT on Request- Amber / Red / Greed / Blue). Colour rendering index (CRI)>80. SDCM-3 MacAdam. K- Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Power factor >0.9, THD <10%, Surge protection 2KV. Luminaire dimension : 316mm diameter x 1329mm height. CE & BIS Certified. Inhouse NABL accredited lab

S/F SURFACE ROUND LED PANEL(18W)

SITC of 1000mm long rigid architectural LED Linear light with integral driver & housing of Extruded aluminium alloy & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire width shall be 38mm & height of 47mm without brackets. The luminaire’s integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted ±95°. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The nominal weight of the luminaire shall be 1.55KG (±10%). The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 30° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 & shall have SDCM≤4, CCT: 3000K. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 20- 24W and system lumen output of not less than 1600 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have a non-integral driver with input voltage of 24V DC. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation.The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables & necessary end plates / covers.

SITC of Linear inground drive over 20W/M L: 1000mm CCT: 2700K / 3000K / 4000K / 6500K LINEAR WALL WASHER

SITC of 6 meter lighting high pole Customized to 4 arm for Decorative Light fitting . complete all acceeries as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

……Do………but size 90 mm dia (OD-90 mm & ID-76 mm nominal

……Do………but size 120 mm dia (OD-120 mm & ID-103 mm nominal)

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness

……Do………but size 300 mm width X 50 mm depth X 1.6 mm thickness

Feeder pillar-1 ( PART -B AREA ) INCOMER 1 no 40A TPN MCB (10 KA ) as incomer BUS BAR 100 A TPN Copper busbar.,INDICATING LAMP 1 set of ON/OFF push buttons for manual operation OUTGOING 5nos. 32 A DP MCB's (10 KA breaking capacity) as outgoings All interconnections and wiring as required for automatic ON and OFF operation of the SLD. 2 mm thick M.S. sheet metal Cubicle Board as per specifications mentioned elsewhere in the document complete, including earthing as required. Fidder pillar as described above

Supplying & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 4 C x 16 sq. mm Al armoured

……Do………but size 4 C x 10sq. Mm

……Do………but size 2 C x 10sq. Mm

……Do………but size 2 C x 6sq. Mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 C x 16 sq. mm

……Do………but size 4 C x 10sq. Mm

……Do………but size 2 C x 6 sq. Mm

……Do………but size 2 C x 10 sq. Mm

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. PIPE 4.5 mtr long 40mm dia including accessories hick including accessories, providing masonry enclosure with cover plate having locking arrangement and watering pipe with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

SUB HEAD- VIII : LIGHTNING CONDUCTOR Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including accesssories, and providing masonary enclosure with cover plate(CI heavy duty) having locking arrangement and watering pipe pipe of 2.7 mtr long etc. with charcoal or coke and salt ) as required.

Providing and fixing of lightning conductor finial, made of 25mm dia 300 mm long, G.I. tube, having single prong at top, with85 mm dia 6 mm thick G.I. base plate including holes etc.complete as required.

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

SITC of 15 KVA,Single Phase Silent,240V Type Liquid cooled D.G.Set(CPCB-IV-Approved) with AMF,With Suitable Rating of Diesel Engine directly coupled with suitable rating of Alternator,inbuilt Fuel tank,Battery,Air Filter, Silencer, and fitted with other standard accessories, Complete with 4 No. GI Plate Earthing & Making of of Suitable Size of Foundation Complete in all Respect with standard warrenty

Supply& Fixing of 4.5 KG CO2 Fire exitinguisher with all accessories as required.

Supply& Fixing of 4kg Mild Steel Red ABC Type Fire Extinguisher with all accessories as required.

Supply & fixing in position fire buckets (5 Nos.) duly filled with dry fine sand & fixed on Angle iron frame as required. The fire buckets shall be painted Red from outside & white from inside, one handle at the bottom to hold complete as required.

Modern Electric Company (BID ID -387491)