REPAIR AND REPLACEMENT TO FLOORING CEILING CABINET DRAINS TILING AND OTHER MISC WORKS IN OFFICERS QUARTER AREA UNDER AGE BR II IN NORTH COMPLEX

Amount

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc including demolition of existing old concrete complete all as specified and directed.

75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and including demolition of existing old cement concrete in ground floors and pavings n.exc 15cm thickness (below or above) ground level complete all as specified and directed

75mm thick PCC 1:2:4 type B2 using 40mm graded crushed stone aggregate as in hardstanding including necessary formwork and spike rolling or making impression of expanded metal while the concrete is green etc and including demolition of existing old cement concrete complete all as specified and directed.

Rubber moulded chequered cement concrete coloured tiles 25cm x25cmx 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete including dismantling of existing tiles of any description complete all as specified and directed.

Granite stone of any colour (of any type) 20mm thick machine cut, in floors bedded with and including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry, and pointed in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing including dismantling of existing granite stone complete all as specified and directed.

Udaipur green marble work, 18 to 20 mm thick (table rubbed and polished) as in cooking platform with and including 20 mm thick cement screed in CM 1:4 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges including dismantling of existing marbal work complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situtions complete all as directed.

Machine cut Kota stone slab flooring 20-22 mm thick laid over and including 20mm screed bed in CM 1:4 laid and jointed with grey cement slurry, mixed with pigment to match the shade of slab including grinding,rubbing and polishing mirror finish including dismantling of the existing kota stone flooring of any description etc complete all as specified and directed

Machine cut kota stone slab mirror polished 20-22mm thick as in skirting/dado over 10mm th rendering in cm 1:4 & jointed with grey cement slurry mixed with pigment to match the shade including dismantling of the existing kota stone skirting/dado of any description etc complete all as specified and directed

Vitrified ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Vitrified ceramic coloured tiles 10 mm thick (square/ rect) polished, in verticle surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 including dismantling of existing tiling and removing rubbish of the permises complete all as specified and directed.

Non skid ceramic coloured tiles join tless 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Glazed ceramic coloured tiles of size 300x450 x 7mm thick, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM (1:4) finished rough to receive tiles complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Glazed ceramic coloured tiles of size 300 x 200 x 7mm thick, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM (1:4) finished rough to receive tiles complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

25mm thick PCC 1:2:4 type B0 using 12.50mm graded crushed stone aggregate as in floors and finishing the concrete surface fair and rough including demolition of old existing concrete complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. Note :- Work to be carried out upto 7.5 mtr height

Preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down shutters of any description.exc 1 Sqm and n.exc 2 sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each ccomplete all as specified and directed

Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded Drg No TD 032 Sh 1/10 to 10/10 complete all as specified and directed.

Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded Drg No TD 032 Sh 1/10 to 10/10 complete all as specified and directed.

30mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squares edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed.

35mm thick 2nd class H.W. factory made plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.

35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squares edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

30mm thick flush shutter, ISI marked, solid core construction, with block board core and ply wood face panel commercial type on both side as approved complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR etc complete all as directed

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheets complete all as specified and directed.

2nd class hard wood, plain straight chowkats & frame wrought rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed.

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as directed.

Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed

Butt hinges, 75mm long, medium weight, cold rolled, mild steel complete all as specified and directed

150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

100mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and directed.

150 mm long extruded aluminium alloy handles complete all as directed

100 mm long extruded aluminium alloy handles complete all as directed

300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

18mm thick colour PVC prelaminated board fixed to timber frame work as in cup board shutter / shelves, pelmet box and similar items fixed in repair complete all as directed.

Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as directed

Magnetic PVC catcher for kitchen cup board complete all as directed

25mm dia cupboard knobs of brass polished & fixed with screws etc complete all as directed.

Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples fixed in repair complete all as specified and directed

Hacking out old broken glass pane (any size thickness and description) from wooden frames or steel frame complete all as specified and directed

3mm thick sheet glass ordinary quality in square n exc 0.50 sqm each pane glazed with oil putty or fixed with wooden bead complete all as specified and directed

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified and directed.

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified and directed.

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

Pre- painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

Pre- painted galvalume aluminium Zinc coating GI based tile profile corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

Pre- painted galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding ridges to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

2nd class hardwood as in wooden scantling clean swan fixed with nails complete including dismantling existing timber scantlings 40 sqcm and over in section in any position etc complete all as specified and directed

4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI trap, lime concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, CP jet and pipe etc complete including necessary PVC pipe fittings fixed in repair complete all as specified and directed.

Brass chromium plated towel rail 600mm long fixed in repair complete all as directed. Make : ESSCO (Jaquar) Cat No. AEC-1111 or equivalent of make Cera/Hindware

Vitreous china wash basin, white, flat back, size 550x400mm including bracket, 32mm brass CP waste fitting, PVC waste pipe fixed in repair complete all as specified and directed.

15mm Chromium plated basin mixer with U shaped round casted spot with 450mm long braided hoses fixed in repair complete all as directed. Make:- ESSCO (Jaquar) cat No MQT-516AKN or equivalent of Make cera/Hindware

15mm Chromium plated wall mixture with 115mm long bend pipe for connection to overhead shower (with bush and piston divertor fitting) with areator fixed in repair complete all as directed. Make :- ESSCO (Jaquar) cat No,MQT-517BKN or equivalent of Make cera/Hindware.

15mm bore long body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- ESSCO (Jaquar) cat part No MQT-512KN or equivalent of Cera/Hindware

Corner glass shelf assembly with bracket complete all as specified and as directed. Make :- Jaquar Cat part No CAN1173 or equivelent of Cera/Hindware .

CP grating 100mm dia with hole for waste pipe complete all as specified and directed.

Overhead shower round shape 100mm dia round shape singlei flow (ABS body chrome plated with grey face plate) with with rubit cleaning system with including 115 mm long shower arm fixed in repair complete all as directed. Make:-ESSCO (Jaquar) Cat No. EOS-542N or equivalent of make Cera/Hindware.

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

Rubberised polished precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid, jointed and pointed in grey cement with pigment to match the shade of tile with and including 25mm thick sand cushioning layer including dismantling of existing damaged tile flooring etc complete all as specified and directed.

Glass shelf 600 mm long complete all as specified and as directed. Make :- Jaquar Cat part No CAN 1171N equivalent of Cera/Hindware

Stainless steel plate rack size 24"x30"x10" fixed in repair to wall complete all as specified and directed. Make:- Prayag Cat part No.P-330 or equivalent in Blue star/Nirali.

Decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod, fixed in repairs complete all as specified and directed.

Drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28mm with plastic ring of ABS plastic of dia 56 to 58mm, a pair of brackets, fixed in repair complete all as specified and directed

15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 142 gm) fixed in repair complete all as specified and directed.

20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gm) fixed in repair complete all as specified and directed.

Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 914 mm x 460x 203 mm bowl size 405 mm x 354 mm x 203mm complete all as specified and directed. Make :- Make:- Prayag Cat part No.1239DM or equivalent in Blue star/Nirali.

Health faucet (ABS body) of 15mm bore with 1.2 metre long PVC tube and wall hook fixed in repair to 15 mm bore Pipe complete all as specified and directed. Make :- ESSCO (Jaquar) Cat part No ALE- ESS- 583 equivalent of Marc Zoloto.

Preparation of old plastered surfaces of wall, bricks surfaces or corrugated AC sheet roofing by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including removing old vegetation etc and applying one coat of cement base paint (snowcem) complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound emulsion distemper on walls complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

12mm thick HDF laminate MT finish flooring/skirting over and including 2 mm thick foam sheet over a layer of polythene film sheet including taking down old exsiting flooring complete all as specified and directed. Make :- Action Tesa/Green Ply/Kitply

M/S RAJESH KUMAR GOYAL