REPAIR TO JOINERY PLUMBING WORKS ANDCERTAIN MISC REPAIRS AT BISAG N GANDHINAGAR

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Demolition Concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified.

Demolition of cement concrete of any description and in any position (un reinforced) not otherwise specifically provided for complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n exc 1.5 sqm each.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 sqm but n exc 4.00 sqm each.

Taking down shutters of any description n exc 1sq. m each.

Taking down shutters of any description exc 1sq. m but n exc 2.00 sqm each.

Taking down shutters of any description but exc 2.00 sqm each.

Hacking out old broken glass of any thickness, size, quality or description from metal /wooden frame including punching or drilling out old glazing pins/spring clips etc complete

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and as directed.

Dismantling of cast iron/ PVC or reinforced concrete drain pipe of 75 to 110mm dia of any description including high rise bldgs etc complete all as specified.

Dismantling water tanks exc 1000 but n.exc 2000 Ltrs capacity.

Demolition of stone slabs and tiles of any thickness and in any position laid, bedded and pointed in any mortar otherwise specified complete all as specified and as directed.

Taking up or down steel tubing pipe and connections 15mm bore complete all as specified and directed.

Taking up or down steel tubing pipe and connections 20mm bore complete all as specified and directed.

Taking up or down steel tubing pipe and connections 25mm bore complete all as specified and directed.

Taking up or down steel tubing pipe and connections 50mm bore complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting,/ fibre sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Demolition and breaking up 150 mm bore SGSW drain pipe set in cement mortar including haunching and bed concrete complete all as specified and directed.

Demolition and breaking up 200 mm bore SGSW drain pipe set in cement mortar including haunching and bed concrete complete all as specified and directed.

Demolition and breaking up 300 mm bore SGSW drain pipe set in cement mortar including haunching and bed concrete complete all as specified and directed.

Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris outside BISAG.

Excavating in trenches, n exc 1.5 m wide on plan and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in soft soil complete all as specified and directed..

Excavating in trenches, n exc 1.5 m wide on plan ,exc 1.5m and n exc 3.00m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in soft soil complete all as specified and directed..

Returning, filling in, including spreading , levelling , watering and well ramming in layers not exceeding 25 cm thickness in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L ATT Along the internal and external wall below concrete or masonry apron using chemical emulsion of CHLOROPHYRIPHOS 20 EC as specified in particular specification to @ 2.25 litres per linear metre including drilling and plugging holes minimum 300mm depth at 300mm c/c in apron complete all as specified and as directed

M&L ATT of soil under existing floors using emulsion of CHLOROPHYRIPHOS 20 EC as specified in particular specification @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed

M&L PCC 1:3:6 Type C-1, using 20mm graded stone aggregate as in coping, cills, steps, bed plates, kerb, benching of manhole and similar work including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L PCC(1:2:4) using 40mm graded stone aggregate as in surface channels and drains and similar works etc complete all as specified.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6 complete all as specified and directed.

Repair of loose doors shutter of any description to existing door, refixing in same opening, fittings & adjustment for smooth functioning but exc 2 sq. m each as required and as directed by Engr-in-Charge.

M&L 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

M&L French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified

M&L 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match with vision panels or peepholes, square or rectangular including lipping fixed to chowkhats complete all as specified and as directed

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete as in repair all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F 100mm long butt hinges, medium weight, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F 150mm long extruded brass handles, fabricated type polished complete all as specified and as directed

S&F 200 mm extruded brass barrel tower bolts, with cast and sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed

S&F 300 mm brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed

S&F 150mm floor door stopper of aluminium alloy powder coated with hard drawn steel spring complete all as specified and as directed.

S&F Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm fixed with SS screw & bolts complete as in repairs all as specified and as directed.

S&F Stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm fixed with SS screw & bolts complete as in repairs all as specified and as directed.

S&F 25 mm dia stainless steel decorative curtain rod with brackets on both side with SS fittings and fixtures arrangement complete as in repairs all as specified and as directed.

S&F Aluminium extruded section body door closer hydraulically regulated, designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed with nails or welding to existing frame complete as in repairs all as specified and as directed.

M&L Maintenance of floor door spring for aluminium door by greasing, oiling and replacement of screws etc complete as in repairs all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete as in repairs all as specified and as directed.

S&F 100mm long butt hinges, medium weight, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete as in repairs all as specified and as directed.

S&F 150mm long extruded brass handles, fabricated type polished complete as in repairs all as specified and as directed.

S&F 200 mm extruded brass barrel tower bolts, with cast and sheet barrel and rolled or cast bolts and fixed complete as in repairs all as specified and as directed.

S&F 300 mm brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete as in repairs all as specified and as directed.

S&F Cylindrical stainless steel lock best quality and duplicate keys for built in Wooden door complete as in repairs all as specified and as directed.

S&F Sliding lock of aluminium window fixed complete as in repairs all as specified and as directed.

S&F 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring complete as in repairs all as specified and as directed.

S&F 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished complete as in repairs all as specified and as directed..

S&F Stainless steel fancy type handles of size 100 mm complete as in repairs all as specified and as directed.

S&F Magnetic catches ( Size 25 mm x 12mm ,(NO. 3) complete as in repairs all as specified and as directed.

S&F Telescope channel 460mm Long 1st quality fancy type suitable for sliding racks of inbuilt cupboards etc complete as in repairs all as specified and as directed.

S&F Door seal aluminium plate with nylon brush ivory matt having width 6cm colour ivory, matt finishing, material metal with brush including screw for fixing etc complete as in repairs all as specified and as directed.

S&F Stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame complete as in repairs all as specified and as directed.

S&F Stainless steel glass 'H' door handle(one set) size 350 mm complete as in repairs all as specified and as directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, filling/ packed with PCC 1:3:6, Type C0 back side all around frame complete all as specified and as directed.

S&F Aluminium alloy powder coated standard hollow section frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (thickness of powder coating 50 micron) complete all as specified and directed.

S&F MS Framed work such as grills or gratting,framed work of window and guard bars etc with ends of bars welded of any size and any design including welding all as directed of Fe 290 Grade E-165 as in gates complete all as specified and directed.

M&L Welding to steel gates, wicket gates / windows / doors / Cupboards exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded n. exc 6 mm complete as in repairs all as specified and as directed.

M&L Stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement as follows:- Top horizontal 50 mm SS Pipe 01 No ,20 mm SS Pipe 03 No's, 40 mm vertical SS round Pipe for pole 90 cm height complete as in repairs all as specified and as directed.

S&F Manually operated blackout roller blinds of size as per required width & drop, having hardware top tube made of extruded aluminium 38mm dia and wall thickness of 1.2mm with spline adoptable to accommodate clutch of UNISILIL/ACMEDA make CLUTCH MECHANISM moulded plastic having self-lubrication with glass fibre reinforcement having a minimum lifting capacity head adoptability 38mm operating chain plastic/steel ball chain adoptable to the clutch pitch for smooth operation of blinds locking member plastic /steel stop locks for limit setting adoptable to be steel chain bonding 30/36mm wide double sided adhesive tape of 3meter for strong holding capacity SPRING BOOSTERS provided as per the requirement bottom bar aluminium extruded circular section with powder coated finish , having a min. weight to be 365gm /meter for a perfect fall to fabric to avoid warpage /floating ends are covered with ends cap to give a perfect finish FABRIC – blackout roller blinds WINFAB MAKE composition PVC/FIBREGLASS weight 470gm/sqm etc complete as in repairs all as specified and as directed.. Indore Air Quality – Green Guard/ ECO-Codice Certified. (Make: Marvel /D’Decor /Hunter Douglas or equivalent.

S&F Aluminium powder coated ( minimum thickness of powder coating 50 micron of approved colour) ventilator , partially glazed and partially louvers , outer frame and mullion fabricated with aluminium section of size 82.50mm x 38mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) portion glazed with 3mm thick frosted glass including rubber beading and glazing clip half portion louvers of 80mm wide and 4mm thick frosted glass including aluminium louver patti including SS wire gaze for fixing of 0.36mm dia and 1.40 width aperture with 25x3 mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down of old ventilator complete as in repairs all as specified and as directed.

S&F Aluminium doors (minimum powder coating 50 micron of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50 mm thick, middle rail of section 85mm x 44.5mm x 1.50 mm thick and top rail of section 80.4mm x 44.5mm x 1.50 mm thick and styles of section 80.4mm x 44.5mm x 1.50 mm thick with 4 mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150 mm wide and 1.50 mm thick including 150 mm aluminium tower bolt, brass mortice lock in position complete as in repairs all as specified and as directed.

S&F Aluminium partition (minimum thickness of powder coating 50 micron of approved colour) made with aluminium anodised section 62.30mm x 44.45mm x 1.50mm fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5.0mm thick glass (black/ tinted/ plain) and 12 mm prelaminated particle board/12 mm thick PVC hollow sheet ,4mm thick bakelite sheet all necessary fittings in position complete as in repairs all as specified and as directed.

Taking down Aluminium door, windows and ventilator and refixing in same opening after repair and replacing glass pane complete all as specified (Note : Glass pane shall be measured and paid separately under respective items).

M&L 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc fixed with L-type or J-type or cranked hook bolts complete all as specified.

M&L Anodised aluminium snap grid frame work of size 605mm X 605mm for false ceiling complete as in repairs all as specified and as directed.

M&L Hangers 6mm dia. G.I (upto 1200 mm length) size of grid 605 mm X 605 mm adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40*3 mm size 60 mm long complete as in repairs all as specified and as directed.

Dismantling to existing water proofing treatment (WPT) including cement concrete of any description and any thickness and removing debris to outside BISAG and M&L 15 mm thick screed bed in CM (1:4) over RCC roof / brick wall mixed with water proofing compound (WPC) @ 3% by weight of cement and preparing the surface to receive WPT treatment, applying a coat of oil based bitumen primer confirming to IS No. 3384 - 1986 @ 0.30 litrs/ Sqm and then laying APP modified membrane 3mm thick with non woven polyester reinforcement membrane (3.00 Kg/Sqm) (centre core) by torch application method over primed surfaces and including provision of Terrazzo tiles 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry laid over 15mm thick screed bed in CM 1:6, all specified and directed by Engr in Charge. ( Note:-WPC will be paid separately)

S&F Ceiling tiles of size 605mm x 605mmx15mm thick fixed to grid complete all as specified and directed.

S&F Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturer’s instructions complete as in repairs all as specified and as directed.

S&F Decorative laminate type 1 of 0.9 mm thick glossy surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete as in repairs all as specified and as directed.

M&L 18-19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work , or aluminium frame work , complete as in repairs all as specified and as directed.

M&L 18 mm thick MDF board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work , or aluminium frame work complete as in repairs all as specified and as directed.

S&F 18mm thick PVC Sheet one side prelaminated of approved texture as in cabinet with shelves and partitions) including required beading and necessary fittings and fixtures as per manufacturers instruction complete as in repairs all as specified and as directed.

Extra over rates for external teak wood lipping 6 mm thick ,width 18 to 20 mm fixed with nails complete.

M&L 6 mm thick plywood as in cover for cooler, Air conditioner or similar works etc fixed at window including necessary cutting and waste complete as in repairs all as specified and as directed.

M&L 12 mm thick plywood including necessary cutting and waste complete as in repairs all as specified and as directed.

M&L 18 mm thick plywood including necessary cutting and waste complete as in repairs all as specified and as directed.

M&L 25mm thick cement concrete type B-1,1:2:4 (20mm graded aggregate) as in level course complete all as specified and as directed.

M&L 75mm thick plain cement concrete (1:2:4) type B-2 (40mm graded aggregate) in flooring and similar works complete all as specified and directed.

M&L 75 mm thick PCC ( 1:3:6) type C-2,(20mm graded aggregate) as in plinth protection including joint filling etc complete all as specified and directed.

M&L 75mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base of floor finishes and paving and similar works complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface of size 450mmX 300mmX 7mm or 600mmx300mmx7mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat of 10mm thick in CM (1:4) complete all as specified and as directed.

M&L Non - skid ceramic coloured tiles 10 mm thick joint free area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L Vitrified ceramic double charged coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match15mm thick in cement plaster 1:6 including tile adhesive etc complete all as specified and as directed.

M&L Vitrified ceramic double charged coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in wall, skirting/ dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match10mm thick in cement plaster 1:4 including tile adhesive etc complete all as specified and as directed.

M&L 20mm thick Granite (of any type) of colour work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L 18-20mm thick Z black / lakha red granite work (table rubbed and polished including moulding, polishing) as in floor etc in any position including 15mm thick screed bed in cement mortar (1:4) and pointing with white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite of existing floors complete all as specified and directed.

M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

M&L Vitrified Heavy duty full body exterior paving tiles min 10 mm thick (square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm with mixture of white laid in floor and including 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes complete all as specified and directed complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping complete including 25mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonry wall, finished even and smooth without using extra cement complete all as specified and as directed.

M&L 5 mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L Rendering 15mm thick on fair faces of concrete block masonry in cement concrete 1:4 in two layers first coat 10mm thick in Cm 1:4 and second coat 5mm thick in CM 1:4 mixed with WPC @ 3% by weight of cement and finished fair and even all as specified. Note : Water Proofing compound shall be measured separately.

M&L Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting on plastered surfaces preparatory to distempering using roller brush complete all as specified and as directed.

M&L Preparation of new surfaces of ceiling and applying three coats of white washing complete all as specified and as directed.

M&L Preparation of new plastered surfaces of wall over applying two or more coats of 100% Premium acrylic emulsion paint (weather) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller brush complete all as specified and as directed.

M&L Preparation of old surfaces of wall over applying one coat of 100% Premium acrylic emulsion paint (weather) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller brush complete all as specified and as directed.

M&L Preparation old surface of wall and applying two coats of distemper oil emulsion over and including one coat of 3 mm thick wall care putty using roller brush complete all as specified and as directed. (Make :- Asian or equivalent.)

M&L Preparation of new ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L Applying 3mm thick wall care putty on wall surfaces and similar works etc complete all as specified and directed.

M&L Applying 3mm thick wall care putty on ceiling surfaces and similar works etc complete all as specified and directed.

M&L Complete removal of existing treatment of old surfaces of walls and applying two coats of distemper oil emulsion with a coat of 3 mm thick wall care putty including alkali resistant priming paints using roller complete all as specified and directed.

M&L Preparation of old surfaces of internal and external wall and applying texture painting of approved shade including one coat of 3 mm thick wall care putty, approved base coat and top coat using roller brush complete all as specified and as directed by Engr-in-Charge.

S&F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminium frame work ,providing suitable accessories (like EPDM, Rubber beading, Screwing, fasteners etc.) complete all as specified and as directed.

Supply only 5.5 mm thick sheet glass ordinary suitable size of door, window and ventilator for existing to match.

Supply only 3 mm thick sheet glass ordinary suitable size of window for existing to match.

S & F Glass bricks of approved make of size 195mm X195mm X 80mm with white cement (1:1) at all heights, with necessary PVC frame etc all as specified and as directed by Engr-in-charge.

S&F Solar control film 50 micron reflective type sticker to glass panes,exc.1.5 Sqm as per instructions of manufacturers ,complete all as specified and as directed.

S&F 5 mm thick figured glass suitable size of frame ,snap type beads, glazing clips, joint cleats, rubber gasket etc and other accessories all as specified and directed.

S&F 12 mm thick frosted glass, toughened door frame shutters fixed to wall/floor with suitable stainless steel pivot, stainless steel 350 mm long 'H' Types glass door handle standard, locking arrangement including frosted sheet 1mm thick and all other accessories and the edges of the glass should be properly moulded/grinded complete as in repairs all as specified and as directed

M&L Preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Complete removal old painted surfaces of wall and applying two coats of plastic emulsion paint using roller brush complete all as specified and as directed by Engr-in-Charge.

M&L Preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L Complete removal of existing treatment to steel and iron surface of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer including easing of steel window by providing lubricant oil to hinges/pivot complete all as specified and directed.

S&F Plastic water closet seat cover, white or black colour closed pattern with flat bottom complete as in repairs all as specified and as directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete as in repairs all as specified and as directed. (Make : Cera/ Jaquar or equivalent)

S&F Hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook complete as in repairs all as specified and as directed

S&F Toilet roll paper holder with stainless steel flap with wall fange complete as in repairs all as specified and as directed, (Make :-Jaguar Cat part No ACN-1153S or Equivalent)

S&F Bib cock with wall flange complete all as specified and directed complete as in repairs all as specified and as directed Make:- Jaquar CAT No OPP-15037PM or Equivalent) .

S&F Pillar Cock with 450 mm long braided hoses complete as in repairs all as specified and as directed .(Make :-Jaguar Cat part No KUP-35001PM or Equivalent)

S&F Angular stop cock with wall flange complete as in repairs all as specified and as directed .Cat Part No OPP-15053PM (Make :-Jaguar or Equivalent)

S&F EWC with wall hung cistern of size 350mmx480mmx395 mm with PP soft closing seat cover & Drainage L bend pipe, gasket and installation kit with PP normal close seat corner , Hinges ,fixing accessories and set including taking down old water closet and refixing with seat cover, low level flushing cistern complete as in repairs all as specified and as directed .Jaguar Cat Part No -CNS-WHT-551SNPP184LZ (S-trap).

S&F Vitreous china white wash hand basin 515mmx410mmx195mm including all necessary fitting such as 15 mm CP pillar cock, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, complete as in repairs all as specified and as directed.

S&F 32mm PVC waste pipe for wash hand basin/urinal/sink 600mm long complete as in repairs all as specified and as directed

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete as in repairs all as specified and as directed

S&F 32mm brass chromium plated waste coupling for wash hand basin/ urinal etc complete as in repairs all as specified and as directed

S&F Cast iron soil waste and vent pipe 75mm bore sand cast pipes with or without ears fixed to walls complete all as specified and directed

S&F Cast iron soil waste and vent pipe 100mm bore sand cast pipes with or without ears fixed to walls complete all as specified and directed

Extra over cast iron pipes and fittings for providing lead joints in lieu of cement joints for 75mm dia bore complete all as specified and as directed.

Extra over cast iron pipes and fittings for providing lead joints in lieu of cement joints for 100mm dia bore complete all as specified and as directed.

S&F CI cover for oval access door for 75mm dia pipe with bolts complete as in repairs all as specified and as directed.

S&F CI cover for oval access door for 100mm dia pipe with bolts complete s in repairs all as specified and as directed.

S&F Cast iron floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete as in repairs all as specified and as directed

S&F Cast iron Nahani trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete as in repairs all as specified and as directed

S&F PVC 150 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified and directed

S&F PVC 110 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified and directed

S&F PVC 75 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified and directed.

S&F in 150 mm bore PVC (SWR) bends any radius complete as in repairs all as specified and directed.

S&F in 110 mm bore PVC (SWR) bends any radius complete as in repairs all as specified and directed.

S&F in 75 mm bore PVC (SWR) bends any radius complete as in repairs all as specified as directed.

S&F in repair 110 mm PVC (SWR) junction double, (double T),with assess door equal or unequal complete all as specified as directed.

S&F 75 mm PVC (SWR) junction double, (double T),with assess door equal or unequal complete as in repairs all as specified as directed.

M&L 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement as in repairs all as specified as directed.

M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete as in repairs all as specified and directed.

S&F 110mm PVC (SWR) 'P’ trap with accessories complete as in repairs all as specified and directed.

S&F 110mm PVC (SWR) 'S’ trap with accessories complete as in repairs all as specified and directed.

S&F Grating doom 150mm x 150 mm of stainless steel, complete as in repairs all as specified and as directed.

S&F Clamp for Rain water single pipe line of 150 mm (6") dia vertical fixed with wall distance 3" with Each plumbing pipe clamping support made of U bolt R/M for 110mm dia pipe rain water bracket and channel support for pipe made of low carbon deep draw hot roll gauge corrected mild steel with ribs and notches are hot dip + Zn Al flake coated. The U bolt R/M are made of low carbon mild steel with rod diameter 7.5mm approx. Zn Al Flake coated with semi Transparent Ribbed Silicon Rub Sleeve, with Flange nut set having natural serration - Zn Al Flake coated refer Technical drawing etc complete as in repairs all as specified and as directed by Engr- in-Charge Note : (i) Rain water bracket for 160mm pipe (6") with channel support with wall distance (3") (ii) U bolt R/M for 160 mm pipe Dia -1 No (iii) Justi Khilla 2.2/2" size Zn coated 2 Nos complete

S&F Clamp for Rain water single pipe line of 110 mm (4") dia vertical fixed with wall distance 3" with Each plumbing pipe clamping support made of U bolt R/M for 110mm dia pipe rain water bracket and channel support for pipe made of low carbon deep draw hot roll gauge corrected mild steel with ribs and notches are hot dip + Zn Al flake coated. The U bolt R/M are made of low carbon mild steel with rod diameter 7.5mm approx. Zn Al Flake coated with semi Transparent Ribbed Silicon Rub Sleeve, with Flange nut set having natural serration - Zn Al Flake coated refer Technical drawing etc complete as in repairs all as specified and as directed by Engr- in-Charge Note : (i) Rain water bracket for 160mm pipe (6") with channel support with wall distance (3") (ii) U bolt R/M for 160 mm pipe Dia -1 No (iii) Justi Khilla 2.2/2" size Zn coated 2 Nos complete

S&F Clamp for Rain water single pipe line of 75 mm (3") dia vertical fixed with wall distance 3" with plumbing pipe clamping support made of U bolt R/M for 110mm dia pipe rain water bracket and channel support for pipe made of low carbon deep draw hot roll gauge corrected mild steel with ribs and notches are hot dip + Zn Al flake coated. The U bolt R/M are made of low carbon mild steel with rod diameter 7.5mm approx., Zn Al Flake coated with semi Transparent Ribbed Silicon Rub Sleeve, with Flange nut set having natural serration Zn Al Flake coated refer Technical drawing etc complete as in repairs all as specified and as directed by Engr- in-Charge Note : (1) Rain water bracket for 160mm pipe (6") with channel support with wall distance (3") (ii) U bolt R/M for 160 mm pipe Dia -1 No (iii) Justi Khilla 2.2/2" size Zn coated -2 Nos complete

Demolition of existing sunken floor and filling in sunken floor of WC/ Bathroom of any height, and repair to sunken floor with 50 mm thick, PCC 1:2:4 , side wall 15mm thick plastering in CM 1:3 of internal surface with WPC, including APP membrane sheet with bituminous primer, maintain to proper slope towards mouth of spout pipe than filling 40 to 20mm graded aggregate then fill with PCC 1:5:10 type E-2 using 40mm graded stone aggregate there after 50mm PCC 1:2:4 and including 50mm bore GI water pipe light grade spout complete all as specified and directed. (NOTE ;-WC, PVC pipe, socket & tiles shall be measured and paid separately)

Repairs to internal water supply pipe lines, bathroom fittings, sanitary fittings and fixtures including clear any obstructions for supply of water supply , carry out minor repairs such as replacement of washers , checknuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes , thread (shoot) , M seal screw , nails to make water supply , plumbing lines functional and leak proof complete all as specified and as directed. Note: Any other materials required to be replaced shall be paid under respective items.

Repair and fixing of notice board, photo frame, and similar work of any description or size, required carpenter work and carry out using and including petty materials such as nails, screws, struts etc complete all as specified and directed. Note: Any other materials required to be replaced shall be paid separately

Cleaning of PVC tank of capacity of tank exceeding 500 Litres and not exceeding 1000 Litres by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, removing sludge, scale mud etc removing to outer side of BISAG-N.

Cleaning of PVC tank of capacity of tank exceeding 1000 Litres and not exceeding 5000 Litres by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, removing sludge, scale mud etc removing to outer side of BISAG-N.

S&F 2000 Ltrs capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and etc including fixing only ball valves complete.

S&F 20 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20 mm iron pipe or brass ferrule and fixed complete as in as in repairs all as specified and directed.

S&F 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for 25mm iron pipe or brass ferrule and fixed complete as in as in repairs all as specified and directed.

S&F 50 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for 50 mm iron pipe or brass ferrule and fixed complete as in as in repairs all as specified and directed.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S&F 20 mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S&F 25 mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S&F 50 mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S&F UPVC pipes of 15mm bore including all fittings complete as in as in repairs all as specified and directed.

S&F UPVC pipes of 20mm bore including all fittings complete as in as in repairs all as specified and directed.

S&F UPVC pipes of 25mm bore including all fittings complete as in as in repairs all as specified and directed.

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as in repairs all as specified and as directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as in repairs all as specified and as directed.

S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as in repairs all as specified and as directed.

S&F 50mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as in repairs all as specified and as directed.

M&L Removing existing treatment of crumple joints on vertical surfaces and filling with Bituminous filler of thickness 25mm confirming to IS-1834 and thereafter sealing with Polyurethane Sealant (single pack) and covering with 22 gauge thick aluminium plain sheet with over lapped minimum 300mm of width not less than 150mm confirming to IS 737.

M&L Removing existing treatment of expansion joints and filling on horizontal surfaces with Bituminous filler of thickness 25mm confirming to IS-1834 and thereafter sealing with Polyurethane Sealant (single pack) and covering with aluminium plain sheet of 1mm thick of width not less than 150mm and fixed with 25mm long mild steel chromium plated screw with rawl plugs at 400mm centre to centre in slot made all as specified and directed.

M&L 150 mm bore salt glazed stone ware (SGSW) drain pipe, of grade 'A' laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M&L 200 mm bore salt glazed stone ware (SGSW) drain pipe, of grade 'A' laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M&L 300 mm bore salt glazed stone ware (SGSW) drain pipe, of grade 'A' laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M&L Bedding to drain pipes including packing under pipe, and haunching against both sides in PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) against the side of SWG/RCC pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L Bedding to drain pipes including packing under pipe, and haunching against both sides in PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) against the side of SGSW/RCC pipes after they are laid and tested for 200 mm bore pipe complete all as specified and directed.

M&L Bedding to drain pipes including packing under pipe, and haunching against both sides in PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) against the side of SWG/RCC pipes after they are laid and tested for 300 mm bore pipe complete all as specified and directed.

Removing building materials etc.to a distance of 500 m to 1 km , beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified.

M&L Cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching for forming brackets channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) and reforming benching as required for 150 mm bore SWG/RCC pipe complete all as specified and directed

M&L Cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching for forming brackets channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) and reforming benching as required for 200 mm bore SWG/RCC pipe complete.

M&L Cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching for forming brackets channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) and reforming benching as required for 300 mm bore SWG/RCC pipe complete all as specified and directed

Removal of blockage in sewage line from WC / floor trap to first manholes, gully trap, etc with sectional / flexible rod or steel or bamboo or through mechanical sewage cleaning apparatus and finally washing with fresh water complete all as directed

Cleaning of manhole of size 600mm to 1000mm depth by bailing out water taking out sludge & removing the sludge outside BISAG-N.

Cleaning of manhole of size 1000mm to 2000mm depth by bailing out water taking out sludge & removing the sludge outside BISAG-N complete all as specified and directed

Cleaning of sewage line of stoneware pipe and RCC pipe between two consecutive manholes or gully trap to manhole by rodding and flushing water in line after rodding to clean the line for 150mm dia pipe complete all as specified and directed .

Cleaning of sewage line of stoneware pipe and RCC pipe between two consecutive manholes or gully trap to manhole by rodding and flushing water in line after rodding to clean the line for 200mm dia pipe complete all as specified and directed .

Cleaning of sewage line of stoneware pipe and RCC pipe between two consecutive manholes or gully trap to manhole by rodding and flushing water in line after rodding to clean the line for 300mm dia pipe complete all as specified and directed .

S&F FRP manhole covers, frame and gratings having any shape for manhole covers and installed as per manufacturer instruction. The top layer of covers, frames, and gratings consists of quartz and conundrum crystals, bonded with special grade of UV stabilised resin to get good abrasion resistance. The fibre glass shall be reinforced with glass fibre in the film of UD stitched, multidirectional wooden roving to get good tensile and flexural strength and embedded in the matrix of UV stabilised and high tensile strength modified specially to suit this application. The frame shall be embedded in minimum M25 grade concrete and top level of frame should match with fixed surface etc complete as in repairs all as specified and directed

SNEH TRADERS

Ramdev and Sons