Repairing of Chain Link Fencing around FOPH in CPP area at HWPM

Amount

Providing required men, materials, tools & tackles for clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish including disposal of same to designated location and burning the same under controlled fire conditions etc., all complete as per specifications and as directed by the Engineer in Charge.

Removal of Fallen fencing around FOPH and handling over of the materials to the department store., all complete as per specifications and as directed by the Engineer in Charge.

Earth work in Excavation manually up to 1.50m depth for footings, foundation trenches or drains in all type of soil including dressing of sides and ramming of bottoms, including de watering wherever required, back filling in layers not exceeding 150mm thickness including watering, ramming etc., and disposal of surplus excavated earth up to a lead of 500mts and lift up to 1.50 mts., levelling and dressing of disposed earth etc. complete as per drawings, specifications and as directed by the Engineer-In-Charge

Demolishing cement concrete Nominal concrete 1:3:6 or richer mix(i/c equivalent design mix) manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Providing and laying plain cement concrete of grade 1:2:4 [1 cement: 2 coarse sand: 4 stone aggregate], using 20mm and down gauge crushed stone aggregate of approved quality in foundation, plinth, pedestals etc., for all the works with ACC/ Ultratech/ Birla A1/ Jaypee cement of 43 grade, using cementious content as 320 kg with cement flyash ratio of 80:20 (80% cement : 20% fly ash, flyash available free of cost at plant but transporting by contractor) minimum cement content excluding fly ash should be 256 kg/cum, shuttering, finishing, compacting, levelling, curing etc etc. including embedding the fencing post and struts while laying the concrete, centering and shuttering, spreading, levelling, ramming, finishing, curing etc. complete as per specifications and as directed by the Engineer-in-charge.(M.S post will be paid separately under relevant item).

Providing and laying half brick masonry with Flyash lime brick masonry of class 10 designation in CM 1:4 (1 cement : 4 coarse sand) in super structure including curing, provision of scaffolding etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and laying 15mm thick cement plaster in cement mortar 1:6 (1 cement :6 coarse sand) proportion over brick/ RR masonry/ Concrete walls, floors and other surfaces including providing and mixing approved water proof compound for external plaster in the proportion recommended by the manufacturer, raking of joints, hacking the concrete surfaces, scaffolding where necessary, curing etc., all complete as per drawings, specifications and as directed by the Engineer in Charge.

Providing and applying two or more coats of acrylic smooth exterior coating of Apex Ultima of M/s. Asian Paints / Excel of M/s. Nerolac / Heatshield of M/s. O.FIXIT / Weathershield Max of M/s. ICI Delux or other approved equivalent make and shade over the plain plastered/ sand face / rough cast plaster/ RCC jalli / RCC fins at locations as required, on old wall surfaces, applied @ 1.67 ltr/10 sqm. over and including priming coat of exterior primer applied@ 2.20 kg/ 10 sqm), ensuring an interval of 4-6 hours for each successive coats etc. complete as per the manufacturer's specification and as directed by the Engineer.

Providing and fixing chain link fabric fencing Made of G.I. wire of 4mm diameter of required width in mesh size 50x50 mm including strengthening with 2 mm dia G.I. wire, nuts, bolts and washers as required and providing , applying One or more coats of aluminum paint on old work with paint of approved brand and manufacture to give an even shade on old surface, including cleaning and scraping of old loose paint/scales etc., complete including all materials, labour, transport, scaffolding as required and cleaning after completion of work etc.complete as per specifications and as directed by the Engineer. etc., all complete as per specifications and as directed by the Engineer-in-charge.

Providing, fabricating, transporting, erecting and fixing in position structural steel members of SAIL/ VIZAG/ JINDAL/ TATA make of sections like tubes, flats, angles, channels etc., at all heights and including cutting, grinding, welding where ever required, hoisting, fixing in position and applying two coats of synthetic enamel paint of approved make over a coat of red oxide primer etc., complete all as per the drawings, specifications and as directed by the Engineer in Charge.

Providing and fixing with G.I. barbed wire Fencing to "Y" angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles including removing of old and handing over to sectional stores etc., all complete as per specifications and as directed by the Engineer-in-charge. (Cost of posts, struts, earth work and concrete work to be paid for separately). Note: Payment to be made per metre cost of total length of barbed wire used.

Providing and applying One or more coats of aluminum paint on old work with paint of approved brand and manufacture to give an even shade on old surface, including cleaning and scraping of old loose paint/scales etc., complete including all materials, labour, transport, scaffolding as required and cleaning after completion of work etc.complete as per specifications and as directed by the Engineer.

Providing and applying One or more coats with ready mixed red oxide zinc chromate primer of M/s. Asian Paints / Excel of M/s. Nerolac / Heatshield of M/s. O.FIXIT / Weathershield Max of M/s. ICI Delux or other approved equivalent make on steel galvanised iron/steel works on old work of approved brand and manufacture to give an even shade on old surface, including cleaning and scraping of old loose paint/scales etc., complete including all materials, labour, transport, scaffolding as required and cleaning after completion of work etc.complete as per specifications and as directed by the Engineer.

naresh constructions

BALAJI MECHANICAL WORKS