Construction of Nial Jhaloon road including Bridge over Buhal Khad at RD 5/370

Amount

Earth work in excavation for all type of bridge structure in all type of classification of soil comprising for ordinary soil, ordinary rock,hard rock, Chiseling/ wedging out rocks (Where blasting is prohibbited) as per drawing and MORTH technical specification section 300 and as per the direction of Engineer-in-Charge including setting out, shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto all lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimeter) compacted thickness including shoring and strutting and pumping and bailing out water (Surface and sub soil water) upto any depth any quantum of water including cleaning of slush which may arrise out during dewatering as directed by the Engineer-in-Charge Including carriage of materials within all leads lifts and other incidental .The rate is including octori, Royality , Malkana , Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated Cement concrete for plain/ reinforced Cement concrete in open foundation for all type of structure complete of plain cement concrete grade M-10 (M-Ten) nominal mix 1: 3: 6 ( One cement : three sand : six graded crushed stone aggregate 40mm ( forty millimeter nominal size) on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work complete in all respect as per drawing and MORTH technical specification section 1500,1700and 2100 as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The Rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated Plain/reinforced cement concrete in Sub structure as per drawing and MORTH technical specification section 1500, 1700, 2200 RCC Grade M-25 (M- twenty five) designed mix with cement contents not less than 399 kg. (Three hundred ninety nine ) Kilogram per cubic meter with 20mm (Twenty millimeter) nominal size graded crushed stone aggregate and curing complete including cost of form work in abutment etcetra complete as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in Sub structure complete as per drawing and MORTH technical specification section 1500, 1700, 2200 RCC Grade M-30 (M- thirty) designed mix with cement contents not less than 407 kg. (Four hundred seven) Kilogram per cubic meter including curing complete using crushed stone aggregate 20mm (Twenty millimeter) nominal size including formwork but excluding the cost of reinforcement in bed block and dirt wall etcetra as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and MORTH technical specifications section 1600, 2200 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the direction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidental. The rate is including of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm ( six hundred millimetre) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and MORTH Technical Specification section 2200 complete in all respect as per the direction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidental. The rate is including of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level cast steel rocker bearing, conforming to IRC:83 (Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and technical specifications, including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level forged steel roller bearing, conforming to IRC:83 (Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and technical specifications, including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing weep holes in brick masonry, plain/reinforced concrete abutment, wing wall, return wall with 100mm ( One Hundred millimeter) diameters AC pipe extending through the full width of the structure with slope of 1(V): 20(H)(one vertical: twenty horizontal) towards draining face complete as per drawing and MORTH. technical specifications section 2700 including carriage of materials within all leads, lifts and other incidental as per approved drawing design and as directed by the Engineer-in-Charge. The rate is including octroi , Royality , Malkana , Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure complete as per drawing and MORTH technical specification section 1500,1700 and 2300 with M-30 (M-Thirty) grade design mix with cement contents not less than 407 kg (Four hundred seven) kilogram as per cubic meter with 20mm (Twenty milimetres) nominal size crushed stone aggregate and curing complete including the cost of formwork but excluding reinforcement in deck slab etcetra complete as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is incuding of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in super structure complete as per drawing and MORTH technical specifications section 1600, 2300 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the direction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidental. The rate is including of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying a burried expansion joint, expansion gap being 20 mm ( twenty millimetre), covered with 12 mm (twelve millimetre) thick, 200 mm (two hundred millimetre) wide galvanised weldable structural steel plate as per IS: 2062, placed symmetrical to centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8 mm (eight milimetre) dia. 100 mm (One hundred milimetre) long galvanised nails spaced 300 mm (three hundred millimetre) centre to centre along the centre line of the plate, all as specified as per MORTH technical specification section 2600.as per the direction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidental. The rate is including of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and filling joint sealing compound as per drawing and technical specifications with coarse sand and 6% (six percent) bitumen by weight as per MORTH technical specifications section 2600 and as per direction of the Engineer- in charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing in position 20 mm (twenty millimetre) thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10m (ten metre) to cater for a horizontal movement upto 20 mm (twenty millimetre), covered with sealant complete as per drawing and MORTH technical specifications section 2600 including carriage of materials within all leads , lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Construction of precast reinforced cement concrete mechanically mixed and vibrated precast railing of cement concrete grade M-30 (M-thirty) design mix with cement contents not less than 407 kg (four hundred seven) kilogram per cubic meter with aggregate size not exceeding 12mm (twelve milimeters) true to line and grade tolerance of vertical reinforcement cement concrete post not to exceed 1 in 500 ( one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm ( two thousand millimeter) leaving adequate space between vertical post for expansion, complete as per drawing and MORTH technical specification section 1500,1600,1700 and 2700 including the cost of reinforcement and form work and curing complete as per directions of Engineer-in-Charge including carraige of materials within all leads, lifts and other incidential. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S drainage spouts complete with 100mm ( one hundred millimeter) dia galvanised mild steel down pipe corrosion resistant structural steel grating complete as per drawing and MORTH technical specifications section 2700 and as per the direction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax,GST or other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-thirty) design mix with cement contents not less than 407 kg (four hundred seven) kilogram per cubic meter with 20mm (Twenty milimeters) nominal size aggregate and curing complete in approach slab including the cost of form work and reinforcement complete as per drawings and MORTH technical specification section 1500,1600,1700 and 2700, including carriage of materials within all leads, lifts and other incidental as per the direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax,GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete design mix to obtain the minimum compressive strength of grade M-15 (M-Fifteen) with cement content not less than 275 kg ( two hundred seventy five) kilogram per cubic meter in levelling course below approach slab and curing complete as per drawing and MORTH technical specification section 1700 and 2700 including cost of form work complete including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax,GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-thirty)mix design having cement contents not less than 407kg (Four Hundred seven ) Kilogram per cubic meter with 20 mm (twenty milimeters) nominal size crushed stone aggregate and curing complete in wearing coat including cost of form work and reinforcement as per drawing and MORTH technical specification section 1500,1600, 1700 and 2700 as per direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing man hole cover complete in all respect with frame of 900 mm ( nine hundred millimetre) internal dimension cast iron cover heavy duty weight of cover not less than 58 kg( fifty eight kilogram) in door for man hole in reinforced cement concrete slab as per standerd design and drawing as per the direction and entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Earth work in excavation for all types of road structures such as retaining walls, breast walls, culverts, drains, parapets and other similar structures in all kinds and classification of soil, comprising of ordinary mix soil, ordinary rock, hard rock, chiseling/wedging out rocks (where blasting is prohibited) complete in accordance with the lines and dimensions shown in the drawings, including setting out, construction of shoring, bracing, removal of stumps and other deleterious materials and disposal of excavated material upto any leads and lifts including dressing of sides and bottom and backfilling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 150mm (one hundred fifty milimeters) compacted thickness including shoring and strutting and pumping or bailing out water (surface and sub-soil water) up to any depth and any quantum of water and cleaning of slush which may arise out during dewatering complete as per drawing and MORD Technical Specification section 300 and 1600 as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete nominal mix 1:4:8 (One cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size), on ground or under water for all type of structure, in R/wall / B/wall and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub soil water)including removal of slush which may arise at time of laying concrete for all heights/depths including cost of form work and curing complete for 14 (fourteen) days as per drawing and MORD Technical specification section 800, 900, 1200 and 1600 as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government.

Providing 100mm (one Hundred millimeter) dia ISI marked P.V.C. pipe Weep Holes in brick masonry/stone masonry plain/ reinforcement concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of 1 (V):20H (One vertical : twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section700,1200 and as per the direction and entire satisfaction of Engineer-in-Charge complete, including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Back filling with granular materials behind abutment, Retaining wall/Breast wall, Wing walls and the like complete as per drawings and MORD technical specification section1200,1600 and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Loosening of the ground up to a level of 300mm (Three hundred millimeter) below the sub-grade level, watered graded with motor grader and compacted in layers to meet the requirements of Table 300.1 and 300.2 with three wheel 80-100 (eighty –one Hundred) kN static roller for sub-grade construction as per MORD Technical specification section 300 and as per direction and the entire satisfaction of the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Construction of sub grade and earthen Shoulder with approved materials obtained from borrow pits within all leads and lifts, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 as per MORD technical specification section 400 including hauling of material with in all leads, lifts and other incidentals and as per the entire satisfaction and direction of Engineer-In-Charge. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drains and foundation of all other structures, graded and compacted to meet requirement, including setting out, true to the lines, grades, width and side slopes in accordance with drawings, including spreading the embankment material with motor –Grader in successive layers of 200mm (two hundred millimeter) uniform thickness, and compacting with vibratory roller 8-10 (eight to ten) Tonne static weight to meet the requirements of table 300.1 and 300.2 as per MORD technical specification section 300 and 1600 and as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government.

Construction of Granular sub base 150mm (one hundred fifty millimeter) compacted thickness by providing well graded material as per table 400.1, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with tractor mount appropriate rotavator at OMC and compacting with three wheel 80-100 (eighty – one Hundred) kN static roller to achieve the desired density, complete as per MORD technical specification section 400 for grading-I material and as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Providing, laying, spreading by mechanically means and compacting to 75mm (seventy five millimeter) compacted thickness, crushed stone aggregates of Grading-II, 63mm to 45mm (sixty three millimeter to forty five millimeter) nominal size to water bound macadam specification including spreading in uniform thickness using templates, hand packing rolling with three wheeled roller 80-100 (eighty to hundred) kN static weight in stages to proper grade and camber including applying and brooming stone screening Type-B of size 11.2 mm (eleven point two millimetre) nominal size at the rate of 0.20 (zero point two zero) cubic metre per 10 Sqm. (ten square metre) and binding material at the rate 0.06(Zerro point Zero six)cubic metre per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical specification section 400 and as per direction and satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing, laying, spreading by mechanically means and compacting to 75mm (seventy five millimeter) compacted thickness, stone aggregates of Grading-III, 53mm to 22.4mm (fifty three to twenty two point four millimeter) size to water bound macadam specification including spreading in uniform thickness, using template, hand packing motor grader, rolling with three wheeled roller 80-100 (eighty to hundred) kN static weight in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.18cum (zero point one eight cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical specification section 400 and as per entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface with hydroulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg (zero point eight five kilogram) per square meter as per MORD Technical specification section 500, as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-I) including cleaning the road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate 0.275 kg (zero point two seven five kilogram) per square meter on the prepared granular surface treated with primer complete as per MORD Technical specification section 500 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing, laying and rolling open graded premix carpet of 20mm ( twenty millimeter) compacted thickness composed of 13.2mm ( thirteen decimal two millimeter) to 5.6 ( five decimal six millimeter) aggregate for wearing coarse including loading of aggregate with front end loader heating binder and aggregate in hot mix plant 30/40 (thirty/forty) tonne per hour capacity transporting mixed material with tipper to site of work and laying with paver finisher to the required grade and camber rolling with power road roller 8/10 (eight/ten) tonne using 0.27 cum (zero decimal two seven cubic metres ) of graded stone aggregate mixed with 14.6 kg (fourteen point six kilogram)of bitumen binder using VG-10 (Viscosity grade- ten) per ten square meter of road surface to required line grade and level but excluding the cost of tack coat and seal coat inclusive of all corrective measures such as laying of profile corrective coarse for all depth filling of depression for all depth and construction of super elevation and camber, where required as per M.O.R.D. technical specifications section 500 by mechanical means or as directed by the Engineer-in Charge including carriage of material within all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels ,grade and cross fall using type B at the rate of 6.8 kg (six point eight kilogram)per ten square metre mixed with crushed sand defined as passing 2.36mm sieve at the rate of 0.06 cum (zero decimal zero six cubic metre) per ten square metre using bitumen VG-10 (Viscosity grade- ten) by mechanical means as per MORD technical specification section 500 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of material with in all leads, lifts and other incidentals .The rate is including octori, royality,malkana ,toll tax,GST, or other taxes imposed by the Government.

Providing and fixing of typical NABARD informatory sign board with logo as per M.O.R.D. specification and drawing . Three MS plates of 1.6 mm ( one point six millimeter) thick top and middle plate duly welded with MS flat iron 25mmx5mm ( twenty five millimeters into five millimeters) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm ( twenty five millimeter into twenty five millimetre into five millimeter). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. ( Two Numbers) 75mmx75mm (seventy five millimeter into seventy five millimeters) of 12 SWG ( twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 ( M fifteen) grade blocks of 450mmx450mmx600mm ( four hundred fifty millimeters into four hundred fifty millimeters into six hundred millimeters), 600mm ( six hundred millimeters) below ground level the top most diamond plate will be welded to middle plate by 47mmx47mm (Forty seven milimetre into forty seven milimetre) of 12 SWG (twelve standard wire gauge) steel plate tube . All MS will be stove enameled on both sides. Lettering and printing, arrows, borders etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications section 1700 as per direction and entire satisfactions of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Rohit

rajat thakur govt contractor

Nishchal Mahajan

Ujjawal Singh