Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.0 LAccepted-AOC | ₹6.0 L | L1 | Accepted-AOC Single Bid |
| Sl No | Description | Qty | Unit | ST XAVIER BOAT YARD |
|---|---|---|---|---|
| 1.00Painting and allied works of steel boats | ||||
| 1.01 | 14.Painting primer coat with zinc rich primer over cleaned old surface (Asian paints or equivalent brand approved by department) including surface preparation. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design. | 280 | 85m2 | 23,800 ₹24,990 |
| 1.02 | 15.Painting with synthetic enamel paint using approved quality enamel paint one coat (Asian paints or equivalent brand approved by department). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design. | 280 | 109 m2 | 30,520 ₹32,046 |
| 1.03 | 16.Above each additional coat using approved quality enamel paint one coat (Asian paints or equivalent brand approved by department). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design. | 280 | 71 m2 | 19,880 ₹20,874 |
| 1.04 | 17.Cutting the damaged portion of old rusted skin plate by chipping and pre heating using gas flame and removing rust by hammering and thin cutting and removing plate. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. | 280 | 220 meter | 61,600 ₹64,680 |
| 1.05 | 18.Fabrication works using MS plate angle etc (Marine quality, IS 2062 Grade B) including cutting, leveling, straightening, grooving joining and finishing. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department.
The rate is applicable to all works involving MS Sheet/MS Flat/ or MS material if not specifically mentioned in the schedule of rates.
MS Plate (IS2062 Gr B) will be provided by Department | 34 | 7938 Quintal | 2,69,892 ₹2.8 L |
| 1.06 | 20.Painting with epoxy primer one coat (Asian paints or equivalent brand approved by department) including surface preparation. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design. | 310 | 212 m2 | 65,720 ₹69,006 |
| 1.07 | 20 A.Each additional coat of above item 20 | 310 | 138 m2 | 42,780 ₹44,919 |
| 1.08 | 21.Painting with epoxy coal tar or epoxy paint approved quality for each coat over a primer coat already done (Asian paints or equivalent brand approved by department). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design. | 310 | 165 m2 | 51,150 ₹53,707.50 |
| 1.09 | 21 A.Each additional coat of above item 21 | 310 | 107 m2 | 32,860 ₹34,503 |
Tender Value
₹6 L
EMD Value
₹6,000
Closing Date
17 Feb 2024, 6:00 pmClosed
DIRECTOR SWTD
DIRECTORATE SWTD
PAITING AND ALLIED WORKS OF STEEL BOAT
2023_SWTD_624655_2
73/C2/2023-24
Open Tender
Repair and Maintenance Works
10 days
SWTD
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,416
Yes
₹6,000
Yes
29 Dec 2025
30 Dec 2023
22 Feb 2024
30 Dec 2023
17 Feb 2024
30 Dec 2023
Painting and allied works of steel boats
14.Painting primer coat with zinc rich primer over cleaned old surface (Asian paints or equivalent brand approved by department) including surface preparation. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design.
15.Painting with synthetic enamel paint using approved quality enamel paint one coat (Asian paints or equivalent brand approved by department). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design.
16.Above each additional coat using approved quality enamel paint one coat (Asian paints or equivalent brand approved by department). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design.
17.Cutting the damaged portion of old rusted skin plate by chipping and pre heating using gas flame and removing rust by hammering and thin cutting and removing plate. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department.
18.Fabrication works using MS plate angle etc (Marine quality, IS 2062 Grade B) including cutting, leveling, straightening, grooving joining and finishing. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. The rate is applicable to all works involving MS Sheet/MS Flat/ or MS material if not specifically mentioned in the schedule of rates. MS Plate (IS2062 Gr B) will be provided by Department
20.Painting with epoxy primer one coat (Asian paints or equivalent brand approved by department) including surface preparation. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design.
20 A.Each additional coat of above item 20
21.Painting with epoxy coal tar or epoxy paint approved quality for each coat over a primer coat already done (Asian paints or equivalent brand approved by department). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design.
21 A.Each additional coat of above item 21
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_970458.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid