Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹7.3 L
EMD Value
₹8,000
Closing Date
12 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer R and B Division Modasa
Construction of Cultural Cum Community Hall at Bhiloda, Ta- Bhiloda, Dist- Arvalli (Furniture Work) Re-Invite
362665
Nivida No.13 of 2026-27
Open
Civil Works - Buildings
Works
Arvalli
10 documents required · 6 mandatory · 4 optional
₹900
Executive Engineer, R and B Division, Modasa
₹8,000
4 Nov 2026
4 Nov 2026
4 Nov 2026
12 Nov 2026
4 Nov 2026
60 days
Name of work :- Construction of Cultural Cum Community
Hall at Bhiloda, Ta- Bhiloda, Dist- Arvalli
(Furniture Work)
Bill of Quantities
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
1 Providing and supplying High back chair with Metal frame 2.00 Nos. 9292.00
work. Upholstered with Artificial leather/Leatherette and
molded PU foam, together with molded seat & back
covers. The back foam should be designed with contoured
lumbar support for extra comfort. Caster of high durability
& hydraulic. The chair should have cylinder with 5 years
warranty. The size of chair 53cm x 79cm (Back side) and
51cm x 49cm (seat size). The PU foam should be molded
with density =45 +/- 2 kg/m3, with One-piece armrests.
The armrests are scratch and weather resistant. The
permanent contact mechanism is designed with 360 degree
revolving type, 12 degree seat tilt 19 degree back tilt, Front
pivot for tilt with feet resting on ground ensuring more
comfort, Tilt tension adjustment, 5 position locking with
anti-shock back mechanism, which should prevent the
backrest from impacting the user when the lock is released,
static seat depth adjustment=0.5 cm 5 position locking.As
per Instruction of EIC & User Department.
2 Providing and supplying good quality teak wood 1.00 Nos. 23050.22
podium/lectern stand of size approximately 600 mm ×
mm × 1150 mm (W × D × H), made of seasoned and well-
treated teak wood of suitable thickness, having sturdy and
durable construction with sloping top reading/writing
platform, front panel and storage/shelf provision, complete
with suitable metal microphone holder, necessary fittings,
hardware, screws, etc., finished smoothly with
melamine/PU polish of approved shade, complete in all
respects as directed by Engineer-in-Charge.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
3 SINGLE SEATER SOFA SET: Providing and supplying 4.00 Nos. 8246.65
sofa (1 seater) made with using 19mm Thk. Plywood (M1)
structure frame with S.S. legs required necessary support
fixed with necessary fixtures and fastening
(Hardware)(M14). It shall be covered with 32 Density PU
foam(M22) with required Thickness as per design in seat
& back and handle portion; this should be again covered
with 14 mm thick PU foam (M22) with Madarpat cover on
it & upholstered fabric(M26) or leather of suggested &
approved by architect finished with seat, back & all visible
side as per architect drawing. Complete as per architect's
drawing and as per instruction of architect & engineer in
charge. (Refer drawing)
4 TWO SEATER SOFA SET: Providing and supplying sofa 4.00 Nos. 13938.00
(2 seater) made with using 19mm Thk. Plywood (M1)
structure frame with S.S. legs required necessary support
fixed with necessary fixtures and fastening
(Hardware)(M14). It shall be covered with 32 Density PU
foam(M22) with required Thickness as per design in seat
& back and handle portion; this should be again covered
with 14 mm thick PU foam (M22) with Madarpat cover on
it & upholstered fabric(M26) or leather of suggested &
approved by architect finished with seat, back & all visible
side as per architect drawing. Complete as per architect's
drawing and as per instruction of architect & engineer in
charge. (Refer drawing)
5 Providing and supplying Centre Table/Corner Table/Tipoi 3.00 Nos. 2557.32
with Glass top made with 19mm Thk. Plywood (M1)
finished with 1.0 mm Thk. decorative laminate sheet
(M24) specified and approved by architect & fixed with
necessary fixtures and fastening (Hardware) (M14)
inclusive of approved melamine polishing (M29) work.
Top part of center Table covered with 8 mm Thk.
toughened Glass (M27) with Polished Edges. Complete as
per architect's drawing and as per instruction of architect &
engineer in charge. size as per (Refer drawing)
6 Providing and Supplying Heavy Duty Plastic Dustbin of 80 2.00 Nos. 523.18
Liters capacity made from UV Stabilized HDPE material
with hinged lid and strong base, suitable for workshop use.
As per Instruction of EIC & User Department
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
7 Providing and fixing kitchen platform trolley having three 8.10 Sqmt 11615.00
drawers of SS (IS 304) of required size like thali, katleri,
perforated, partition, cupsosar type in kitchen platform
having drawer front side and backside by using 19mm
thick all proof plywood of ISI quality all side laminated
etc. as directed. The size of SS (IS 304) basket of size 4" to
18" for thali, dish, katleri, perforated, partition, cupsosar
type as directed including necessary S.S. fittings, handles,
nobs, telescopic channels, etc. as directed
8 Providing and Supplying good quality moulded plastic arm 400.00 Nos. 523.18
chair of Nilkanth make or Equivalent Company approved
make, manufactured from high-quality virgin
polypropylene/ plastic material, UV stabilized and suitable
for indoor and outdoor use, having sturdy one-piece
moulded construction with ergonomically designed high
backrest with horizontal ventilation slots, broad contoured
seat and intergrated armrests on both sides. The chair shall
have four sturdy moulded legs with adequate stability and
load bearing capacity, smooth rounded edges and finished
surface, resistant to normal wear and weathering. Overall
size shall be approximately 600mm x 600mm x 850mm (L
x W x H), with seat height of approximately 450mm.
Colour, design and make shall be as approved by the
Engineer in charge. Rate shall be include supply,
transportation, loading, unloading and placing at site,
complete in all respects as directed by the Engineer in
9 Providing and supplying good quality plastic arm chair 25.00 Nos. 4181.40
with upholstered cushioned seat and back, overall
approximate size 580 mm (W) × 600 mm (D) × 900 mm
(H), with seat height of approximately 450 mm. The chair
shall be manufactured from high-quality, durable moulded
plastic material, having sturdy frame, ergonomically
shaped backrest and fixed armrests on both sides. The seat
and back shall be provided with suitable cushioning of
approximately 40–50 mm thickness and covered with
good-quality, durable upholstery fabric, properly secured
to the frame. The chair shall have four sturdy plastic legs,
stable construction and smooth, uniform finish, capable of
withstanding normal seating loads and suitable for regular
indoor use in community halls. Complete in all respects as
directed and approved by the Engineer-in-Charge.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
10 Providing and fixing Arabian type curtains made of good 37.07 Sqmt 4862.14
quality, durable and heavy-duty curtain fabric, suitable for
indoor use, comprising of properly stitched curtain panels
with double-folded edges, neat finishing and adequate
fullness, complete with suitable curtain track/rod, brackets,
hooks/rings and all necessary accessories required for
proper installation and smooth operation. The curtains
shall be of approved colour, shade, pattern and texture,
including cutting, stitching, hanging and fixing complete
in all respects as directed by the Engineer-in-Charge.
Total Cost of Construction Cost
(Rupees Seven lakh Twenty Seven Thousand Two Hundred Twenty Eight and Eighty Nine Paise Only)
I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent
should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out
*Estimated amount *Estimated amount
Put to tender Rs…727228.89 Put to tender Rs.727228.89
Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….
Net Rs. …………………….… Total Rs. ………….…
The Contractor shall exhibit a board with detailed specification and details of work as directed by
the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there
4 is a change as per actual mix design the cost of difference of cement consumption have been deducted from
the rate of original item at the rate of input rate mentioned in all the tender.
5 Dismentalling of Credit materials amounting of Rs. 0.00 must be recovered from Contractor's respective R.A.
Deputy Executive Engineer Executive Engineer
Bhiloda R&B Sub Division Modasa R&B Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
02-1 GUIDELINES (1).pdf
02-2 LIST OF APPROVED MAKE (1).pdf
02-3 MANDATORY SPECIAL CONSITIONS (1).pdf
B.O.Q_FURNITURE AT BHILODA.pdf
BUILDING WORK BOOKLET.pdf
Details Specification - Furniture At Bhiloda.pdf
General Specification - State.pdf
GR - 1.pdf
GR - 2.pdf
GR - 3.pdf
GR - 4.pdf
GR - 5.pdf
SBD Book_2023_FURNITURE AT BHILODA_2026_09_30.pdf
Specification Index - Furniture At Bhiloda.pdf
Technical Specification electrical _1.pdf
WORK DETAIL FURNITURE AT BHILODA.pdf
GR - 6 - SBD Change.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .