Repairing & Renovation work of Court Building, Kaparada, Ta.Kaparada, Dist. Valsad

Sr. Description of Item Quantity Unit Rate Amount

1 Removing, Repairing and Refixing Old existing wooden door shutter 84.00 No 2228.06

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures

like 3 Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as

directed by engineer in charge etc comp.

2 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 260.40 Sq.Mt 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

3 Removing and scraping of old deteriorated plaster of any thickness 3917.60 Sq.Mt 13.05

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

4 20 mm Thick sand faced cement plaster on walls upto height 10 1606.70 Sq.Mt 300.66

meters above ground level consisting of 12 mm Thick backing coat of

c.m. 1:3 (1 cement : 3 sand) and 8 mm Thick finishing coat of c.m.

1:1 (1 cement : 1 sand) of structure member etc. comp.etc.

5 Providing 10 mm. Thick cement plaster in single coat for plastering 209.30 Sq.Mt 140.95

on ceiling and soffits of stairs and finished even and smooth in : (I)

Cement mortar 1:4 (1 cement : 4 sand) etc. complete comp.For

6 Providing 10 mm. Thick cement plaster in single coat for plastering 223.40 Sq.Mt 164.34

on ceiling and soffits of stairs and finished even and smooth in : (I)

Cement mortar 1:4 (1 cement : 4 sand) etc. complete comp.For .First

7 Providing 10 mm. Thick cement plaster in single coat for plastering 172.10 Sq.Mt 187.73

on ceiling and soffits of stairs and finished even and smooth in : (I)

Cement mortar 1:4 (1 cement : 4 sand) etc. complete comp.For

8 Providing 10 mm. Thick cement plaster in single coat for plastering 11.10 Sq.Mt 211.12

on ceiling and soffits of stairs and finished even and smooth in : (I)

Cement mortar 1:4 (1 cement : 4 sand) etc. complete comp.For Third

9 Providing 15mm thick cement plaster in single coat on Rough 528.90 Sq.Mt 153.20

(Similar) side of single or birck walls / concrete wall for interior

plastering and finished even and smooth in C M 1:4 (1 cement :

coarse sand) finish etc. comp. For Ground floor

10 Providing 15mm thick cement plaster in single coat on Rough 621.20 Sq.Mt 176.59

(Similar) side of single or birck walls / concrete wall for interior

plastering and finished even and smooth in C M 1:4 (1 cement :

coarse sand) finish etc. comp. For First Floor

11 Providing 15mm thick cement plaster in single coat on Rough 516.10 Sq.Mt 199.98

(Similar) side of single or birck walls / concrete wall for interior

plastering and finished even and smooth in C M 1:4 (1 cement :

coarse sand) finish etc. comp. For Second Floor

12 Providing 15mm thick cement plaster in single coat on Rough 28.80 Sq.Mt 223.37

(Similar) side of single or birck walls / concrete wall for interior

plastering and finished even and smooth in C M 1:4 (1 cement :

coarse sand) finish etc. comp. For Third Floor

13 Dismentaling tiled of stone floors laid in mortar including stacking of 1431.90 Sq.Mt 48.21

serviceable materilas and disposal of unserviceable materials with all

14 Demolition and disposal of unserviceable materials with all lead and 88.80 Cu.Mt 609.26

lift.(i) Lime concrete.

15 Providing and laying water proofing treatment by conventional 88.00 Sq.Mt 946.37

method including cleaning the slab surface by wire brush as directed

including provding first layer of C.M. 1:4 of 40 mm thickness mixed

with water proofing compound at rate prescribed by manufacturer,

including putting of brick bats of average thickness 40 mm Well

immerssed in water laid uniformly on first layer of mortar including

applying cement slurry @ rate of 0.08 bag/sqm. on fixed layer of brick

bats including maintaining necessary slope, in second layer 40 mm

thick C.M 1:4 mixed with water proofing compound as directed,

including finishing smooth with cement slurry as directed complete.

16 Dismantling santtary fittings like wash basin . W.C. pan Indian and 24.00 No 405.70

European type, flushing tank etc. including stacking the materials with

all lead and lift.

17 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 88.00 Sq.Mt 970.07

treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in

colour cement slurry etc. complete. Colour and Shade approved by

Engineer-In-Charge

18 P & L 30x45 cm. Colour Glazed Tiles 6 mm thick in skirting risers of 544.60 Sq.Mt 1441.22

steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement:3coarse sand) and jointed with colour cement slurry

19 Providing and fixing window having extruded aluminum Colour 260.40 Sq.Mt 1713.70

anodized section frame main outer size 63.50 x 38.10 x 1.95 mm,@

Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size

61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, vertical member of size

with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for window.

20 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 110.00 Rmt 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

21 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 110.00 Rmt 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

22 Providing, laying and jointing in true line and level 75 mm dia. UPVC 100.00 Rmt 698.92

SWRType B pipe conforming to IS 13592-1992 with one end plain

and other end socketed with rubbering and fitting conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp at every 2000 mm c/c or shall be

conceled in walss as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all materials.

23 Providing, laying and jointing in true line and level 110 diametre 100.00 Rmt 836.73

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

24 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 30.00 No 571.08

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

25 Providing, laying and jointing in true line and level 160 diametre 120.00 Rmt 831.22

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 160 mm diametre x

mm length x 196 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

26 Provision and fixing water closet squatting orissa type W.C. pan size 12.00 Rmt 1607.92

580mm integral footrest and 100 mm P or S trap and in cluding

mm dia CP brass flush valve and GI inlet connection etc. comp. (A)

Vitreous china long pattern white or colour

27 Providing and fixing screw down bib taps of following size.(B) Brass 29.00 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

28 Providing and fixing Stop tap brass screw down stop tap (i) 15 mm 14.00 205.83

29 Providing and fixing brass screw down stop tap.(C) 25mm dia. 12.00 220.82

30 Providing and fixing wash down water closet dual flushing system 1.00 4189.48

type (European type W C pan) with integral P and S trap including

jointing the trap with soil pipe in cement mortar 1:1 (1 cement five

sand) including providing and fixing plastic seat cover for wash down

WC with CP brass hinges and rubber buffers back plastic seat and

including providing and fixing PVC flushing tank with a pair of C I or

MS bracket with complete fitting such as lead valve siphon 15 mm dia

brass ball valve with polythene float CP brass handle unions and

couplings for connection with inlet out let and over flow pipes 40 mm

dia porcelain enameled flush bend including cutting holes in walls

and making good the same connection the flush bend with cistern

and closet vitreous china.

31 Providing and fixing wash basin with single hole for pillar tap with C.I. 11.00 1961.83

Or M.S. brackers painted white including cutting holes and making

good the same including pillar tap, Brass waste, stop cack , bottle

trap and M I fisher union fittings :(ii) Flat back wash basin 500mm x

400mm size including all necessary fittings etc complete shade and

pattern as approved by Engineer in charge.

32 Providing and fixing Urinal or approved quality including conecting 12.00 1036.27

the Urinal with waste pipe , tap etc. complete.(A) White earthenware

flat back or corner type size 430mm x 260mm x 350mm.

33 Wall painting (Two coats) with plastic emulsion paint of approved 3576.20 80.35

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

34 Wall painting (Two coats) with plastic emulsion paint of approved 1676.50 85.76

brand and manufacture on undecorated ceiling surface to give an

even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

35 Painting Two coats (excluding priming coat) on previously painted 379.50 94.82

steel and other metal surface with enamel paint, brushing to give an

even shade including cleaning the surface of all dirt, dust and other

foreign matter.

36 Painting two coats (excluding priming coat) on previously painted 670.90 93.54

wood and wood based surface with ready mixed paint, brushing,

oil, gloss, semi gloss to give and even shade including cleaning of

all dust, dirt and other foreign matter sand papering and stopping.

37 Wall Painting (Two coats) with weather proof acraylic emulsion 3213.40 114.53

(Apex or equivalent type) paint of approved brand and manufacture

and of required shade on exterior wall surface to give an even shade

over and including primery coat with Alkaly resistance primer of

approved brand after thoroughly brushing surface to remove all dust

and remains of loose powdered material etc. copm. for all height

38 Providing and laying broken chine mosaic flooring for terrace using 799.30 747.29

12 mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

39 Providing and fixing 35 mm thick shutters for Doors, windows and 11.70 4989.65

clerestory windows including Indian teak wood frames 10 cm x 7 cm.

size including anodized alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc,

complete. (iii) Partly panelled and partly glazed.

40 Providing and fixing pre-cast Rubber Dye inter locking concrete block 385.40 686.90

60mm thick with grade of concrete M30 pnumatic compressed by

mechanically pressed and as per approved design confirming to IS

15658: 2006 including 35mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidelines of IRC SP

63-2018 etc complete.

41 Excavation for foundation upto 1.5 m depth including sorting out and 59.60 117.08

stacking of useful materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil

42 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse 15.60 3005.76

sand : 6- machine cut stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and

43 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse 28.40 3683.34

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth

44 Steel work, welded in built up sections framed work including cutting, 4680.00 90.48

hoisting, fixing in position and applying a priming coat of read lead

paint & two coat oil paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to common

rafters and the like..

45 Providing and fixing of Ridge flashing for roof panel shall be made 156.00 858.67

out of 0.5 mm thick pre coated GI sheet . The Precoated sheet shall

be of minimum 240 mpa steel grade confirming to IS 14246:1995 and

shall have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet and polyester top

coat 15-18 micron. The PPGI Sheet shall have plastic protective

guard film of minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members by pop

rivet or self drilling/self stitching fastners @ maximum 450 mm c/c

along length of capping/flashing etc complete .

Deputy Executive Engineer, Executive Engineer

Dharampur (R&B) Sub Division Valsad (R&B) Division

Dharampur Valsad

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent should be

written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

*Estimated amount *Estimated amount

Put to tender Rs…5595307.6 Put to tender Rs…5595307.6

Deduct ……. % below Rs……………… Add ……. % Avove Rs…………..….

Net Rs. ……………… Total Rs. ………….…

In words ………………….…………………… In words ………………….

*( please strike out whichever is not applicable)

An Amount of 5575.27 (Rupees ) shall be recovered from the 1st RA Bill of this work towards salvage value of dismentalled

/ Diversion material likely to be available from dismentalling the Dismentaling of stone flooring irrespective of the

dismentalled quantity actuallly received on site.

All works shall be carried out as public works department Handbook and other

specification of Division or as directed.

All the columns in schedule should be filled in ink or ballpen and the total of the

entries in last column should be struck by the contractor under his signature.

Rate quated include clearance of site (Prior commencement of work and at its close)

in all respects and hold good for work under all conditions,site moisture, weather etc.

The Contractor shall exhibit a board with detailed specification and details of work

as directed by the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

To be continued on additional sheet,if found necessary.

Deputy Executive Engineer, Executive Engineer

Signature of the contractor Dharampur (R&B) Sub Division Valsad (R&B) Division

ÀùËÿëÀËßÞí çèí Dharampur Valsad