Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹40.5 LAdmitted-Finance | -0.15% | ₹40.5 L | L1 | Admitted-Finance |
| 2 | L2₹40.5 LAdmitted-Finance | -0.12% | ₹40.5 L | L2 | Admitted-Finance |
| 3 | L3₹40.6 LAdmitted-Finance | -0.05% | ₹40.6 L | L3 | Admitted-Finance |
Tender Value
₹40.6 L
EMD Value
₹4.1 L
Closing Date
7 Mar 2026, 2:00 pmClosed
EXCUTIVE OFFICER NP MAILANI
EXCUTIVE OFFICER NP MAILANI
CHAT GHAAT WARD NO 07 MAIN TALAB KA SAUNDRIKARAN KARYA
2026_DOLBU_1110994_2
26/E-TENDER/NPMAILANI/2025-26
Open Tender
Civil Works
90 days
NP MAILANI
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,714
EXCUTIVE OFFICER NP MAILANI
₹4.1 L
2 Apr 2026
26 Feb 2026
7 Mar 2026
26 Feb 2026
7 Mar 2026
26 Feb 2026
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in ratio of 1:4:8 (1Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
Class M-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including material all labour and T&P etc. required for proper completion of work.
Class M-150 brick work in 1:6 cement and coarse sand mortar in superstructure including material all labour and T&P etc. required for proper completion of work.
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).
Half Brick work with common burnt clay (non modular) bricks of class 150 in super structure above plinth level upto floor V level in cement mortar 1:3 (1 cement: 3 coarse sand) & providing expansion joint at every 30m.
12 mm thick plaster with cement & C sand of 1.25F.M.mortar in 1:4 including supply of all materials, labour and T&P etc required for proper completion of work
Providing and laying cement concrete in ratio of 1:2:4 (1Cement : 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size ) including supply of all materials, labour and T&P etc required for proper completion of work.
Finishing walls with water proofing cement paint of approved make and quality on new work with to coats to give an even shade, including supply of material labour and T&P etc required for proper completion of the works
Providing and fixing stainless steel ( Grade 304) for main gate for railing made of Hollow tubes, channels, plates etc.including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc.of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing and laying in position specified grade of reinforced cement concrete upto plinth level in ratio 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Providing and laying in position specified grade of reinforced cement concrete in superstructure ratio 1:1.5:3 (1cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete.
Mild steel bars reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts etc.
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc.
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately).Red sand stone - 30mm thick gang saw cut stone
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Supply and fixing of fountain led lights with nozzels (10 feet), pipes,pumps and all necessary fitting and fixing with all T&P and connecting with existing electric system required for proper completion of work.
Supply and fixing 40 mm thick fine dressed red sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush
Pole : Ornamental 3000mm Decorative cast aluminium pole having cast aluminium base and minimum bottom square size 355mm) and galvanised mild steel upper profile having dia 105mm with minimum 14nos groove on outer circle of pipe. Pole will be suitable for Concord Post Top Fixture. Pole is having MS base plate 450x450 x12mm at hole to hole 380mm. Pole is having a service window at bottomcomprising 4 way connector and MCB for loop in and loop out arrangement. Pole are properly machined and reated before epoxy primer coating and polyurethene painted in grephite grey italian capcicot. Fixture : Ornamental 60Watt LED post top luminaire made of aluminium housing duly powder coated/PU painted with PC PMMA clear/frosted diffuser with sturdy four arm. MCPCB having high lumen LED’s are mounted on aluminum heat sinks.
3Mtr. high pole with 157 nos. holes of multiple sizes to create pattern on the ground, pole is made out of extruded aluminium alloy to achieve high strength and corrosion resistence in various atmospheric conditions. pole has a MS base plate fix to aluminum extruded pole. pole has 40watt 30° light to create pattern, and top crown having light of 40watt diffused. Pole is Primer coated and painted anthracite grey out side and golden inside the pole complete top to bottom. The laser pattern should be followed strictly with 157 Nos. holes. internal wiring from top to bottom should run in pre fabricated conduit painted golden same as inside the pole. Pole has a control gear tray pre-wired with MCB, terminal connectors for loop-in/ loop-out arrangement. Base Plate size 250X250X12mm
Supply and fixing of inauguration board etc complete.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
techsummary_2081901.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 8.00 MB
retenderNIT.pdf
Tender Documents • 0.32 MB
BOQ_2081901.xls
BOQ • 0.35 MB
TALABNITF78.pdf
Additional Documents • 7.98 MB
Download all tender documents and submit your bid