REPAIR MAINT OF B R AND EM WORKS FOR RUNWAY AIR FIELD MAINT AND CERTAIN REPAIR WORKS IN MD OTM ACCN AT HALDWANI UNDER GE RANIKHET

Amount

BOQ ( Sch A ) EM Works Taking down and Supply , laying , connecting, testing and commissioning of 70 Sqmm 3.5 core earthed system under ground LT XLPE insulated screened, PVC bedded, armoured heavy duty electric cable with stranded aluminium conductor 1100 Volts laid in trenches, fixed to walls/ drawn through pipe with suitable size glands, crimping type lugs with and incl making good the disturbence surface of road with using PCC 1:2:4 type B-1 etc complete all as specified and directed. Note;-(Excavation, earthwork sand cushioning and cable protection shall be measured and paid for separately.)

Excavation in trenches not exceeding 1.5 mtr wide not exceeding 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, fillingin, incl spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed.

Removing excavated material (soil) to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.. Note :- Thickness of sand cushioning shall be measured after punning.

Supply and fixing unreinforced PCC cable cover class LV type I of size 250x150x40mm complete as specified and directed.

Taking down carefully of existing 400 watt Hi-bay light fitting and supply, fixing and testing of 200 watt rugged radial LED hi-bay light for varied industrial applications hangging on top complete. Make:- Havells cat pat No BAYBRITESAUCERHBP200WLED757WBTOLTG or equivalent cat pat in make Wippro/ Phillips/Bajaj/C&S Note:- (i) The work to be carried at an hight of 14 to 16 meter and no extra shall be paid on this account. The unit rate quoted by the contractor shall deemed to be inclusive of this aspect. Contractor will be responsible for any type of accident/mishappening while carrying out the work by labours and all safety measures shall be taken by the contractor while carrying out work. (ii) Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

M&L in repairing/replacement of burnt and damage part of sliding doors of hanger consisting of following works :- (a) Repair and overhauling of elect motor 3.5 HP capacity installed for moving of gates of hanger. (b) Dismantling of 3.5 HP elect motor 3 phase, 440 volts from hanger door and taking away local works shop and transporting back the same after repairs to its original position complete. (c) Opening of motor winding, cutting of burnt coils and cleaning of slots and replacing the old burnt coils complete all as specified and directed. (d) Applying one coat of red oxide primer, fixing of packing with Pnumax paper and green sheet of glass cloth, rewinding with suitable gauge of super enamelled insulated wire incl condenser. (e) Varnishing with doctor bake varnish, during backtrol and heating properly. (g) Replacement of unserviceable chain, chain gear and greasing to brgs complete. (l) M&L in repair of starter panel box (Door opening panel) including replacement of burnt contactor, ICs, fuses, ON/OFF siwtch (NO/NC switches), Relay etc and checking of electrical connection throughly and making the door in operational condition with repair hinges of opening control panel box by repair or welding to proper close the door of paenl box for the entire satisfaction of GE/Engr-in-Charge.

Note :- (i) The rates for replacement/repaired parts incl all necessary fitting and fixtures reqd at the site of work shall deemed to be included in the unit rate quoted by contractor . Nothing extra shall be provided on this account complete all as spicified and directed. (ii) Standby electric motor of 3.5 HP shall be provided by the contractor at the site for operation of hanger doors at his own cost.

Material & Labour for servicing of silent DG set capacity 250 KVA (Three phase diesel engine driven Generator set) complete all as specified and directed comprising of the following works :- (a) Overhauling of Self starter assembly including replacement of defective part. (b) Replacement of engine oil filters -02 Nos (c) Replacement of diesel filters - 02 Nos (d) Replacement of Air filter - 01 No. (e) Replacement of engine oil of required cap with specified grade - 26 Ltr (Approx) (f) Replacement of alternator carbon bushes. (g) Fan belt as per sample - 03 Nos (h) Replacement of alternator bearing of required size - 02 Nos (j) Replacement slipering assembly - 01 No (k) Replacement of coolant of required cap. (i) Replacement of Battery 12 V, 180 Ah - 02 Nos (m) Replacement of proximate coolant sensor complete with wiring connection. (n) Replacement of LOP (Low oil pressure) indicator sensor - 01 No (o) Replacement of door lock - 04 Nos (p) Replacement of fuel tank cap with lock - 01 No (q) Replacement of unserviceable ARB card - 01 No

Supply and fixing, replacement of unserviceable 100 watt incandescent lamp with glassdoor shed screwed type suitable for H type standing indigator complete all as specified and directed.

M&L in replacement of unserviceable old transformer with 200 watt, 6.5A/6.6A, 5000V, 50 Hz series isolating transformers , suitable for individual lamp control and monitoring saystem and confirming to FAA specification as required complete all as specified and directed.

M&L in replacement of unserviceable old transformer with 45 watt, 6.6A/20A, 5000V, 50 Hz series isolating transformers, suitable for individual lamp control and monitoring saystem and confirming to FAA specification as required complete all as specified and directed.

M&L in replacement of unserviceable old halogen lamp with 200 W, 6.6 A halogen lamp suitable for elevated type uni/semi directional high intensity approach light/PAPI fitting complete all as specified and directed. .

M&L in replacement of unserviceable old halogen lamp with 45 W, 6.6 A halogen lamp suitable for elevated omni directional type medium intensity approach light fitting complete all as specified and directed.

Supply and fixing industrial plug and socket 63 Amp 3P+N+E with DIN rail, IP-67 complete with one triple pole MCB 415V 63 Amps complete all as specified and directed

Supply and fixing industrial plug and socket 32 Amp 3P+N+E with DIN rail, IP-67 complete with one triple pole MCB 415V 32 amps complete all as specified and directed

Taking down of existing unserviceable Aviation obstruction light fitting and supply, fixing and testing of two sided up to 20 watt LED Aviation obstruction light red, round body complete fittings including 2.5 sqmm PVC insulated unshethed multi stranded copper conductor wiring and controlling with suitable rating MCB complete all as specified and directed. Note:- (i) The work shall be carried at outside top of hanger, therefore contractor shall provide ladder to do this work and no extra shall be paid on this account. The rate quoted by contractor shall deemed to be inclusive of this aspect. Contractor will be responsible for any type of accident/mishappening while carrying out the work by labours and all safety measures shall be taken by the ontractor while carrying out work.

Supply, fixing, testing and commissioning of Fire alarm control panel complying with BS EN 54 4 loop with capacity from 99 dectectors & 99 modules and upto 200 detectors and modules (per each loop) complete all specified and directed.

Supply, fixing, testing and commissioning of Detectors Complying with and type certified to EN-45 Addressable type multisensor detector with heat and smoke combination with base with self built intelligence as per IS : 11360 complete all specified and directed.

Supply, fixing, testing and commissioning of Addressable manual call point resettable type complete all specified and directed.

Supply, fixing, testing and commissioning of Addressable electronic sounder cum strobe complete all specified and directed.

Supply, fixing, testing and commissioning of 250 watt Amlifier complete all specified and directed.

Supply, fixing, testing and commissioning of Microphone set complete all specified and directed.

Supply and fixing of 2 core 1.5 sqmm armoured multi stranded copper cable FRLS (Red Colour)with all fixing accessories as per site requirement complete all specified and directed.

Servicing,Testing and commissioning of existing smokle Detector, manual call point, and all connected items of fire alarm at Flight Hanger and make it servicing as directed by Engr-in-Charge at site complete all specified and directed.

Material and Labour for servicing of Air compressor gas pipeline net work heavy duty stainless steel pipe line and replacement of leakage pipe line including welding joints and changing isolation valves pressure reducing valves pressure gauge and make it servicing all as specified and directed by Engr-in-Charge as per requirement of site complete all specified and directed.

Material & Labour for servicing of Electrically operated overhead travelling (EOT) Crane-5 Ton,3 phase 4 wire 415 Volts double girder Medium (III) height-9000mm, Running Lengh-75000mm Pendent Control, Make:-M/s Rock Well Hoisto Crane Pvt Ltd complete all as specified and directed of Engr-in-Charge comprising of the following works :- (a) Replacement of Oil 15 to 20 Ltr Approx.. (b) Repair/Replacement of Unserviceable Contactor, Relay, MCB and MCCB in control panel box. (c) Repair/Replacement of Rope. (d) Repair/Replacement of Winding of 3 phase motor if not running. (e) Working load test . (f) Greasing of all running parts of crane. Note:- Servicing of Crane shall be done by authorised dealer and certificate of same shall also given by contractor regarding servicing and load test duly signed by authoriesed dealer .

Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights, bells etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed .

Supply & Fixing point wiring for one light point/ fan point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including PVC casing/capping and accessories including sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor (FRLS) cable earth wire and connected to earth, etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge)

All as per item No.30 herein before but one bell point controlled by one switch

All as per item No.30 herein before but one light point controlled by one two way switch

All as per item No.30 herein before but one socket outlet 5 Amps on the same board.

All as per item No.30 herein before but one socket outlet 5 Amps on independent board

All as per item No 30 herein before but wiring with 2.5sqmm copper wire (FRLS) PVC and 2.5 sqmm (FRLS) earth wire for socket outlet 5 pin 15 amps on independent board.

All as per item No 30 herein before but wiring with 4.0sqmm copper wire (FRLS) PVC and 4.0 sqmm (FRLS) earth wire for socket outlet 5 pin 15 amps on independent board.

Supply & Fixing point wiring for one light point/ fan point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm (FRLS) multistranded copper conductor cable earth wire and connected to earth etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge.)

All as per item No.37 herein before but one bell point controlled by one switch.

All as per item No.37 herein before but one light point controlled by one two way switch.

All as per item No.37 herein before but one socket outlet 5 Amps on the same board.

All as per item No.37 herein before but one socket outlet 5 Amps on independent board

All as per item No 37 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 1.5 sqmm (FRLS) earth wire for socket outlet 5 pin 15 amps on independent board.

All as per item No 37 herein before but wiring with 4.0 sqmm copper wire (FRLS) PVC and 4.0 sqmm (FRLS) earth wire for socket outlet 5 pin 15 amps on independent board.

Supply & Fixing lamp holder (dome type) PVC insulated body with cord grip cap for angle/battern fitting complete all as specified and directed.

Suppy & Fixing switch piano flush type single pole, one way 6 Amp complete all as specified and directed.

Supply & Fixing switch piano, flush type single pole 15 Amp complete all as specified and directed.

Suppy & Fixing switch piano flush type single pole, two way 6 Amp complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 6 and 16 Amp flush type complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and directed.

Supply & Fixing Bell push, flush type, 5 Amp complete all as specified and directed.

Supply & Fixing steped type electronic fan regulator flush type on the existing phenolic laminatedsheet etc.

Supply & fixing Bell AC 230 volts, 50 Hz single pole complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply and fixing of following rating of modular type ,white polycarbonate,switches, sockets, fan regulator suitable for 250V, AC, 50Hz.Electrical supply and as directed:- (a) 6 Amp one way switch, 1 module

All as per item No 54 above but 6 Amp two way switch, 1 module

All as per item No 54 above but6 Amp 2/3 Pin combined socket shuttered, 2 module

All as per item No 54 above butModular Switch 1 way 16 Amp, 1 Module

All as per item No 54 above but Modular socket 6A/16Amp, 2/3 pin combined, 2 Module

All as per item No 54 above but 6 Amp bell push switch modular type

All as per item No 54 above but Steped type electronic fan regulator modular, 120W-2 module

Supply and fixing of following sizes of modular front plates, white with frame on existing boxes complete as required:- (a) 2 Module

All as per item No 61 above but 3 Module

All as per item No 61 above but 4 Module

All as per item No 61 above but 6 Module

All as per item No 61 above but 8 Module

Supply and fixing anodised rust proof 18 SWG MS box, flush type of following sizes (to be of same make as modular switches and sockets) to be recessed in wall /gypsum partition complete as required :- (a) (1-2 Module)

All as per item No 66 above but (3 Module)

All as per item No 66 above but (4 Module)

All as per item No 66 above but (6-8 Module)

Supply & Fixing sheet metal enclosure with socket plug top and MCBs Single pole and neutral enclosure 240 Volt with a two pin and earth plug and socket complete with on single pole MCB 20 Amp complete including taking down unserviceable sheet metal enclosure of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed including taking down unserviceable main switches MCB DB’s of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

All as per item No. 71 herein before but 8 way

All as per item No. 71 herein before but 12 way

Supply & Fixing sheet metal enclosure for DBs(double door type) Triple pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 415 volts fixed and concealed in wall including taking down unserviceable main switches MCB DB’s of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

All as per item No. 74 herein before but 6 way

M&L for PVC/Polycarbonate rectangular block for mounting, switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100mm x 100 mm and 50 mm deep incl fixed with screws and cup washers and taking down unserviceable switch board of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

All as per item No 76 above but 175 x 100 x 50 mm deep

All as per item No 76 above but 200 x 150 x 50 mm deep

All as per item No 76 above but 250 x 200 x 50 mm deep

Supplied & Fixing Rigid non matallic PVC conduits external dia 20 mm ISI marked exclusive of boxes (Junction/terminal) but inclusive of all tee, bends, elbows, reducers, bell mounth tube ends and fixing accessories such as couplers, lock, nuts, saddles, pipe hooks etc for exiting point/main/sub-main wiring complete all as specified and directed.

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole neutral (SPN) and current carrying capacity 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole neutral (SPN) and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 415V, 10KA 'B' curve miniature circuit breaker (MCB) of triple pole neutral/four pole (TPN/FP) and current carrying capacity 40 to 100 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Material and labour for Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoted rates. 2. Two run of 2.5 sqmm and one run of 1.5 Sqmm incl PVC conduit will be measured as one unit ie one running metre”

All as per item No. 85 herein before but 2 X 4 Sqmm inclusive 4 Sqmm earth wire.

All as per item No. 85 herein before but 2 X 6 Sqmm inclusive 6 Sqmm earth wire.

All as per item No. 85 herein before but 2 X 10Sqmm inclusive 10 Sqmm earth wire.

Material and labour for Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in PVC casping caping ( ISI marked) Heavy grade inclusive of junction/terminal boxes, all fittings and accessories fixed and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoted rates. 2. Two run of 2.5 sqmm and one run of 1.5 Sqmm incl PVC conduit will be measured as one unit ie one running metre”

All as per item No. 89 herein before but 2 X 4 Sqmm inclusive 4 Sqmm earth wire.

All as per item No. 89 herein before but 2 X 6 Sqmm inclusive 6 Sqmm earth wire.

Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type (warm/milky white as required on site) with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling, life of LED light not less than 50,000 hours including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make Havells/Phillips/Bajaj/C&S Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make : Havells cat pat HEXAFT10WLED857SSYMBOPC or equivalent cat part in Make :- Havells/ Phillips/Bajaj/C&S Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply and fixing post top lantern LED type 20Watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper cable of suitable size complete all as specified and directed.

Supply and fixing LED lights T-5 fitting 1x 20W (warm/milky white as required on site), 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose 1.5 RM and life of tube light not less than 50,000 hours complete all as specified and directed.. Make Havells/Phillips/Bajaj/C&S Note:- LED tube light shall be purches to get minimum 2 year warrenty of material from manufracturer.

M&L for taking down ceiling fans / wall mounted fans of any size / sweep after disconnecting the wire from existing ceiling rose and refixing the same after painting the same with synthetic enamel paint by spray machine including filter after cleaning dust, taking out burnt/damaged winding, bushes & cleanig of stator and rotor incl etc. Rewinding with 26/27 SWG of enamelled copper winding wire replacement of bearing /bushes, condencer 2.5/4 mfd handing and testing of fan with and including provision of 23/0.0076 copper flexible core twin core not less than 1.5 meter in length and make the fan operational with a guarantee period of one year after installing the repair fan complete all as specified and directed.

Material & Labour for taking out burnt/damaged winding, bushes & cleaning of stator and rotor incl etc of exhaust fans any sweep and size, Rewinding with 26/27 SWG of enamelled copper winding wire replacement of shaft, bearing /bushes, condencer 2.5/4 mfd handing and testing of fan with and including provision of 23/0.0076 copper flexible core twin core not less than 1.5 meter in length complete all as specified and directed.

M&L for taking out burnt/damaged fan motor of Desert cooler and supply and fixing new fan motor with 26/27 SWG of enameled copper winding wire with bearing / bushes and including provision of 23/0.0076 copper flexible core twin core not less than 3 meter in length with two pin top plug etc. and make the desert cooler in operational condition complete all as specified and directed. Comprising of the following works :- (i) Replacement of water pump including water pipe (Complete set). (ii) Replacement of Fan blade (PVC/Iron) as required on site. (iii) Replacement of desert cooler front grill (Fiber/Steel/Plastic as required) including switch, indicator and regulators. (iv) Checking & tightening the electrical connection (v) Replacement of wood wool (Grass Air cooler cooling pad) suitable of iron/Plastic body desert cooler (vi) Replacement of side grill (sets of 3) for holding wood wool/cooling pads. (vii) Replacement of fan condenser 3.15/4.0 mfd.

M&L for servicing of water heater (Geyser) upto 50 Ltr capacity of any make by cleaning sludge and slurry, calcium inside inner water storage tank and make the geyser in operational condition all as specified and directed by Engr-in-charge. Comprising of the following works :- (i) Rectifying water leakage in inner copper/iron storage tank by using welding (ii) Replacement of heating element upto 2000 Watt. (iii) Replacement of Thermostat of suitable size as required on site. (iv) Checking & tightening the electrical connection (v) Replacement of safety valve. (vi) Replacement of NRV (Non returning valve) of suitable size as required at site .

Supply and fixing solar heater tube including gasket for suitable for fixing of Solar Water heater system (Executed tube collector based) on direct transferring of heat of capacity 250 to 500 LPD and make the system operational complete all as specified and directed.

S & F exhaust fan mettalic body ISI Mark, 300 mm size with blades, frames and louvers including cutting opening through brick/stone /PCC block wall, making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accessories complete all as specified and directed.

S & F exhaust fan made of sturdy Engineering plastic type ISI Mark, copper winding of sweep 300 mm size complete with louvers including cutting opening through brick/stone /PCC block wall, making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accessories complete all as specified and directed.

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost by the contractor.

Supply and fixing LED Security/Street light fittings 35 watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant inclding thermal management in multiple optics complete with IP 65/66 Protection with GI Pipe light grade bracket 1.2 mtr long 40 mm dia fixed to wall with suitable size 2 Nos MS Clamps including nuts, bolts and washers and making connection with using 1.5 sqmm pvc insulated multi standard copper conductor three single core complete all as specified and diredted.

BOQ ( Sch A ) B/R Works Demolition of brick work/stone masonary/precast PCC blcok masonary built in cement mortar complete all as specified and directed.

Material & Labour for brick work with sub class `B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone or PCC block walls etc raking out joints hacking for key scrabbing down water etc complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed NOTE -WPC shall be measured and paid separetely.

Supply only WPC complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion paint over a coat of primer complete all as specified and as directed.

M&L for applying one coat of oil bound distemper to old decorated surface of ceiling to match the existing surface including preparation of surfaces complete all as specified and as directed,

M&L for applying one coat of oil bound distemper to old decorated surface of wall to match the existing surface including preparation of surfaces complete all as specified and as directed,

M&L for removal of existing treatment/finishes from surface and applying two coats of oil bound distemper over a coat of primer white or tinted on old decorated/undecorated surfaces of wall complete all as specified and directed.

M&L for applying one coat of exterior emulsion paint (as per manufacturers instruction) on old decorated surface of wall to match the existing surface including preparation of surface complete all as specified and directed

M&L for preparation of old decorated plastered or unplasteredsurfaces of walls including cornices etc by brooming down stell wire brushing, scraping down smoke soot, moulds, masss and efflorscent salts and trading oil and greasy spots & removing of nails mark & applying one coat of cement base paint on wall to match the existing surface complete all as specified and directed.

M&L for applying one coat of plastc emulsion paint (as per manufacturers instruction) on old decorated surface of wall to match the existing surface including preparation of surface complete all as specified and directed

M&L for applying one coat of synthetic enamel paint incl preparation of old concrete surfaces, plain or moulded, over 10 cm width or girth when unconnected with other painting or when painted in a different complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old decorated wooden surfaces of girth exc 10 cm including preparation of surface complete all as specified and directed

M&L for applying one coat of synthetic enamel paint to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete all as specified and directed

M&L for Leak Seal Self Adhesive Water proof Sealing tape 100 mm size for water leakage fixed complete all as specified and directed but the Work to be carried at an height upto 16 meter from FFL . (Note. All necessary removing old treatment, scaffolding, safety arrangement shall be made by the contractor and quoted rate shall deemed to be included this aspect and nothing extra shall be admissible on this account.)

Demolition of cement concrete (unreinforced) in ground floors and pavings incuding terrazzo topping n.exc 15cm thickness (below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone agg) as in foundation filling and mass concrete complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and rough complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 20mm graded stone aggregate as in pavings, plinth protection incl all necessary form work & finishing surface even & smooth using extra cement complete all as specified and as directed.

Material and labour for cement concrete 1:1.5:3 A1 using 20mm graded crushed aggregate as in floor , pavement, hard standing etc including broom finish complete all as spcified and directed.

M&L for Forming contraction (Dummy) joints 65mm deep x 10mm wide with ceiling compound grade 'A'complete all as spcified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in level course with finshining in cement concrete surface even and rough to receive screed bed complete all as specifed and directed.

M&L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specifed and directed..

M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate). as in Slab supported on walls,beams and columns in floors,roof, landing, balconies incl necessary form work complete all as specifed and directed.

M&L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately)

S & F mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90 mm dia all a specified and directed

S&F in repair PVC 8 to 9mm thick hollow PVC wall/ ceiling panelling including all fixing viz, U and L as design and pattern including all necessary framed works as per manufacturer s instruction , make as approved by GE complete all as specified and directed.

Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed.

M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over with and incl screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over with and incl backcoat of screed bed or bedding layer 10mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

M&L Virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over with and incl screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match as in floor etc , all as specified and directed.

M&L Virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match not exceeding 0.36 sqm but over with and incl screed bed or bedding layer 10mm thick in CM 1:4 on vertical surfaces/skirting complete all as specified and as directed

M&L for Vitrified Parking tiles thickness not less than 10 mm light shade (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding Layer in cement mortar 1:6 complete all as specified and directed.

Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed.

All as per Item No. 145 here–in–before, but for 20mm dia (Bore).

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all GI Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No. 147 here–in–before, but for 20mm dia (Bore).

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete as all specified and as directed..

Dismantling water tanks of capacity exc 500 but n.exc 1000ltrs complete as all specified and as directed.

S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Dismantling water tanks of capacity exc 250 but n.exc 500ltrs complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

S&F in repair PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed.

S&F in repair one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover and necessary nut/bolt for fixing complete all as specified and as directed.

S&F in repair wash hand basin of vitreous china counter sunk size 560 x 410 x 180mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed.

S&F in repair Vitreous China Urinal, full stall type, including, urinal spreader, waste coupling and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe complete all as specified and as directed.

S&F in repair 15mm dia bib taps CP Brass fancy type with Capstanhead, screwed down, screwed for iron pipe of bore 15mm complete all as specified and as directed..

S&F in repair brass Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe complete all as specified and as directed. .

S&F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair Gate valve, Brass, 20mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

S&F in repair Gate valve, Brass, 15mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with 225 mm Flange, swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and as directed.

S&F in repair Glass shelf 450 x 125 x 6MM (with ABS Bracket chromium plated bracket guard and SS railing complete all as specified and as directed

S&F in repair Soap Dish Stainless Steel complete all as specified & directed.

S&F in repair Peg Set of 6 Stainless Steel complete all as specified and as directed.

S&F in repair Corner Glass Shelf 300mm (with ABS Brackets) 300 x 300mm complete all as specified and as directed.

S&F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and directed

S&F in repair Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer) complete all as specified and as directed.

S&F in repair 15mm dia bib taps Sink Cock swinging spout with flange chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.

S&F in repair Brass CP Sink Mixer with regular spout for mixing hot & cold water screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and directed.

S&F in repair Toilet paper Holder with flat recessed type p stainless steel, complete all as specified and directed

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but not exc 2Sqm each complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint over a coat of pink primer to new decorated wooden surfaces of girth exc 10 cm including preparation of surface complete all as specified and as directed.

M&L for Second class hard-wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F in repair powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F in repair powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc. complete all as specified and as directed.

S&F in repair powder coated aluminium windows and ventilator shutters,sliding or fixed type without sash bars , aluminium section weighting 0.55 kg / m including necessary joining cleats , glazing clips ,roller, rubber packing, anodised aluminium snap beading , screws,anodised aluminium fitting such as peg stays hinges,handle,locking device, louvers, rollers etc. complete all as specified and as directed.. (Note:- Glass pane and mesh will be measured and paid separately )

S&F Aluminium Powder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm and suitable aluminium anodised frame F/H section complete all as specified and directed.

Supply & fixing aluminium sheet powder coated of thickness not less than 4mm thick to be in sealed as panel in aluminium door including fixing complete all as specified and directed.

S & F sheet glass 4.8mm thick tinted glass and glazing in squares with oil putty complete all as specified and as directed.

S&F MS mortice lock vertical type, 4 lever of size 100mm size complete all as specified and as directed.

S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty incl making hole and fixing with cement complete all as specified and directed

S&F in repair 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from metal frames incl punching or drilling out glazing pins/spring clip and providing and fixing new ones complete all as specified and as directed.

S & F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane 4mm thick glass complete all as specified and as directed.

S&F mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple/tinted tacks and around all beading complete all as specified and as directed

S&F as in repair mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple/tinted tacks and around all beading complete all as specified and as directed

S&F in repair Stainless Steel Decorative tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed.

S&F in repair 18mm thick veneered decorative plywood , grade - 1 (with BWR resin ) with decorative face venners on both faces fixed with screws to timber frame work, colour and pattern as approved including external teak wood lipping complete all as specified and directed.

S&F Push to open Magnetic Catches for kitchen cabinet doors complete all as specified and directed.

S&F Stainless sensys soft close 0 crank concealed slide on cabinet Hinge, a base of 12.5 (crank 0 degree) with mounting plate (shutter thickness 15-24mm) complete all as specified and directed

S&F Stainless Steel Decorative Cabinet Handle 100 mm complete all as specified and directed

Dismantling framed timber scantlings under 40 sq. cm in section in fillets, rails, posts, rafters, purlins, etc.

S&F 2nd class soft wood, Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads .Exc 6 & n exc 13 sq.cm complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S& F MS Rolled sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails and embbeded in concrete complete all as specified and directed.

M&L for applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on steel surfaces over 10cm width or girth including preparation of new surface complete all as specified and directed.

Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed.

M&L for removal of exsting surface of walls including cornices etc by brooming down stell wire brushing, scraping down smoke soot, moulds, masss and efflorscent salts and trading oil and greasy spots & removing of nails mark and applying two coat of cement base paint on wall to match the existing surface complete all as specified and directed

M&L for removal of existing paint and preparation of new/old road surfaces and applying thermoplstic reflective paint in marking of minimum 2.5mm single coat as in centre line and edge line road marking of 150/100mm width using 'HOT MARK' by indigenous modern propelled road marking machine as directed incl all ingredients such as binder, glass beads Titanium dioxide calcium caarbonate inter filler, thermoplastic requirement for glass beads shall be the table No 800.4 of MOST specification incl spraying of glass beads and removing of old existing paint etc all as per manufacture's instructions complete all as specified and directed

M&L for 3mm epoxy polyurethane floor coating consisting of 200 micron thick priming coat 2000 microns screed coat and 1000 micron thick top coat incl necessary preparation of the existing surface all as per the manufacturers instructions. Work to be carried out in patch work and the make the shade as per existing shade incl removing existing treatment if any complete all as specified and directed

M&L for 3mm epoxy polyurethane floor coating consisting of 200 micron thick priming coat 1000 microns thick top coat incl necessary preparation of the existing surface all as per the manufacturers instructions. Work to be carried out in patch work and the make the shade as per existing shade incl removing existing treatment if any complete all as specified and directed

M&L for 16 to 18 mm thick granite (any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4, incl pointing in white cement 1:2, using marble dust with admixture of pigment to match with shade of granite complete over cement screed bed 15mm thick 1:4, complete all as specified and directed

S&F in repair brass fancy type swan Neck Pillar taps CP brass for iron pipe of bore 15mm fancy type complete all as specified and directed

S&F in repairs 12mm thick Toughned glass door with patch fittings with cover plate of SS-304 grade incl decorative type stainless steel 304 grade floor spring, fixing/moving arrangement at top, stainless steel 2 Nos H type Handles of 450mm suitable size as directed, Fin connect patch lock etc in each door, incl cutting holes in any size in floor and wall complete all as specified and directed

S&F prepainted aluminium zinc steel sheet (galvalume base) or thikness 0.50 having tensile strength of 550 MPA, in colour and profile as approved by GE and to be factory moulded as in roof covering/cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws/self drilling screws, to suit the roofing in customized colour matching with the colour of roofing and scrws are to be fized using torque adjustable electronic gun scrws drills of suitable capacity complete all as specified and directed . NOTE : (a) The work to be carried upto 16 metre from FFL (b) All necessary scaffolding, safety arrangement shall be made by the contractor and quoted rate shall deemed to be included the same and nothing extra shall be admissible on this item))

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, valley gutter and like complete all as specified and directed. NOTE : (a) The work to be carried upto 16 metre from FFL (b) All necessary scaffolding, safety arrangement shall be made by the contractor and quoted rate shall deemed to be included the same and nothing extra shall be admissible on this item)

S&F in repair 75 mm bore PVC (SWR) pipe single socketed, in ay length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified

S&F in repair 75 mm bore PVC (SWR) junction single (Single Tee) equal or unequal complete all as specified and directed

S&F in repair 75 mm bore PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed

S&F in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

ng associate

M/S Rajeev Sharma and Co.