Tender for Underground Cable Fault Tracing & attending the same by Supply and Fixing of Cable End Termination and Straight Through joint kit for various sites within jurisdiction of VAPI GIDC Sub Division under Vapi Industrial Division.

Item Code Unit Rate

Labour charge for excavation of

cable trench of 400mm width x

1200mm depth, in any type of soil for

laying of cable of size up to 240 mm2

(For additional cable 200 mm

additional width shall be considered

i.e. half trench length is to be

Labour charge for excavation of

cable trench of 600mm width x

1200mm depth, in any type of soil for

laying of cable of size up to 240 mm2

(For additional cable 200 mm

additional width shall be considered

i.e. half trench length is to be

Labour charge for excavation of

cable trench of 400mm width x

1500mm depth, in any type of soil for

laying of cable of size up to 240 mm2

(For additional cable 200 mm

additional width shall be considered

i.e. half trench leng th is to be

Labour charge for laying of 11kV /

kV XLPE Cable of size up to 240 mm2

& preparation of sand layer 100mm

thick, in the cable trench & covering

the cable with 150 mm dia (Outer),

thickness 25 mm, 1.0 meter long

RCC half round muffs and providing

and fixing of 4inch width yellow

colour polyethylene tape with

printing"CAUTION ELECTRIC CABLE

BELOW' at 0.75 m depth from ground

surface after laying cable in trench.

This will provide indication that

electric cable is passing underground

so as to protect cable from

mechanical injuries, refilling the

same, as per Instruction of E gineer

in Charge (EIC) .

Labour charge for erecting of 11kV /

22 kV XLPE cable of size up to

mm 2 on DP Structure with fixing of

5 9925000014 02 Nos polymer cleats on top and Meter

middle part. Polymer cleats, nut bolts

etc. fixing material to be provided by

Providing & fixing of 6.11kg/cm2

class4,Green color, 110mm O.D.

8.5mm thickness H.D.P.E. pipe

confirms to IS 4984 and BIS

certification on the erected DP

structure for the mechanical

protection of cable by inserting the

cable inside HDPE pipe. The HDPE

6 9925000015 perJob

pipe shall be erected in such a way

that 300mm shall be below the

ground level and the rest 2700 mm

shall be supported on the DP

Structure with 01 No Polymer cleat.

All materials including polymer cleat

and Nut bolt to be provided by

File No: DGVCLDVPI/TEN/e-file/4448/2026/2431/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI

Letter No: DGVCLDVPI/0638/07/2026 Approved Date: 29-07-2026 05:46

Supply & fixing of heat shrink type

end terminations (outdoor) for up to

7 9925000017 11kV 3C x 185 mm2 size XLPE cable No

as per DGVCL technical s ecification

Supply & fixing of heat shrinkable

type end terminations (indoor) for

8 9925000019 up to 11kV 3C x 185 mm 2 size XLPE No

cable as per DGVCL technical

Supply & fixing of heat shrinkable

straight through joint for up to 11kV

3C x 185 mm 2 size XLPE cables as

per DGVCL technical specification.

Labour charge for excavation of

2100mm long x 1200mm wide x

1200 mm deep joint pits for

installation of 11kV / 22kV Straight

through joints as per instruction of

engineer-in-charge & covering the

cable with 150 mm dia (Outer),

thickness 25 mm, 1.0 meter long

RCC half round muffs & refilling same

as per instruction of EIC .

Testing of cable at various points and

commissioning the feeder as per

9925000025 instruction of engineer-in-charge.Test No

11 result shall be submitted by

contractor with bill.

Supply & fixing of heat shrink type

end terminations (outdoor) for 11kV

12 9925000030 3C x 240 mm2 size XLPE cable as per Nos

DGVCL technical specification.

Supply & fixing of heat shrink type

end terminations (indoor) for 11kV

3C x 240 mm2 size XLPE cable as per

DGVCL technical specification

Supply & fixing of heat shrinkable

straight through joint for 11kV 3C x

240 mm2 size XLPE cables as per

DGVCL technical s ecification.

1 DGVCL will provide key material like MS materials, ABC/Bare conductors,

PSC/RSJ poles, Insulators, Fabricated materials etc. to the contractor.

2 All fabricated items shall be fabricated as per DGVCL approved drawing and

by welding rods confirming to the relevant ISI specification and as directed

by Engineer in charge

3 Necessary electricity connection for fabrication items shall be provided by

DGVCL on payment of required charge for connection & electricity bill of the

same shall be paid by the agency

4 All the rates are inclusive of PF and Exclusive of GST applicable time to time

Work to be carried out after issued of Sub work order by S/dn. Office not

6 All steel material are to be painted as below :

(A) Scrubbing of rusted surface properly before applying the paints on to the

RSJ poles & steel fabricated materials of RSJ/PSC poles is must require.

(B) Two coats of approved ISI mark red oxide (primer) is to be properly

painted for the RSJ poles & Steel fabricated materials of RSJ/PSC poles.

File No: DGVCLDVPI/TEN/e-file/4448/2026/2431/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI

Letter No: DGVCLDVPI/0638/07/2026 Approved Date: 29-07-2026 05:46

(C) Two coats of approved ISI mark Silver paint (i.e. triple mangoes or

equivalent quality silver paint) is to be properly painted on to the RSJ poles &

Steel fabricated materials of RSJ/PSC poles.

7 Submission of Bill for Supply/Purchase of KIT Cable Usage, with bifurcation

of Supply amount along with Labor.

8 Any material (XLPE / Aerial Bunch Cable, Joint Kit etc.) provided by

contractor is approved by DGVCL make, specification and submission of

Invoice with purchase bill.

9 The rates are inclusive of dismantling charges of existing bare conductor and

crediting in to store & dismantling of service lines from LT bare conductor

and to provide service connections on ABC by insulated pierce connectors

through service connection box.

10 The contractor has to collect all the required materials from DGVCL store as

well as credit the dismantle material to the DGVCL store at their cost.

11 Labour Wellfer Cess @1% shell be Deduction in Bill Amt.

EXECUTIVE ENGINEER

DGVCL; VAPI IND DIV.

File No: DGVCLDVPI/TEN/e-file/4448/2026/2431/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI