Providing Grid Connected Solar system at Executive Engineer Bungalow at Valsad, Dist.Valsad.

Name of work : Providing Grid Connected Solar system at Executive Engineer Bungalow at Valsad, Dist.Valsad.

Qnty. Unit Item Item Description Rate in Rate in Words Per Amount

1 Supply, Installation, Testing & Commissioning of

following size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material :

Anodized Aluminum alloy Frame With Twin Wall

Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and

positive power tolerance Pmax: 0/+5, Module Efficiency

should be approx. 18%-21%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 &

MC4 Compatible and Enclosed with Bypass diodes,

100% Electroluminescence test to ensure error free

Modules, Thep. temp. co-efficient of the PV module

shall equal or better than -0.45%/degree C. Solar PV

modules of minimum fill factor 75% to be used. Unit

Production:- 4 to 5 Unit /kw /day (Actual)(1Year Avg)

With 10 year Product warranty and 25 year Linear

Power Warranty., Solar Inverter: MPPT Range: 80-1000

V, Max efficiency: 97.5% - 98.9%, O/p Frequency:

50/60Hz, Operating Altitude (m) ≤4000, O/p Power

Factor: ~1, O/P THDi: <3%, Operating Tempreture

Range: -25~60°C, Anti-islanding Protection: Integrated,

Input Reverse Polarity

Protection Integrated, Insulation Resistor Detection

Integrated, Residual Current Monitoring Unit Integrated,

Output Over Current Protection Integrated, Output Short

Circuit Protection Integrated, Output Over Voltage

Protection Integrated, Protection Degree: IP65, User

Interface LCD & APP,Datalogger & Communication:

GPRS / Wi-Fi, Module Mounting Structure: Seamless

Box Pipe / 'C' Channel of suitable size for rooftop solar

installations with good stability agaist wind & weight

load., Hot Dipped Galvanized steel coils. suitable

arrangement for base plate for foundation , solar panel

mounting, the structure should be suitable for carry the

load of solar panel,wiring, sprinkler system etc. with

necessary foundation work/wall mount, j bolt, anchor

fastner etc. the nut bolt used for installtion of stucture

should be (SS 304) quality. and Balane of System with

necessary Swithgears (Suitabel size and protection of

ACDB & DCDB), inter connecting wiring, earthing

system, lightining arrester system, all liasoning work

with various gov. dipartment like state nodal

agency,DISCOM & CEIG is included in agency scope

15 PER 1 (Excluding GEDA Application fees, Solar connectivity 42455.35 #NAME? Per

KW Charges, Meter connectivity Charges, Meter testing KWatt

Charges.) (C ) Grid Tied Solar Power System: 11 -

1 Ea. 1 Providing and erecting Approved make Four pole 6790.43 #NAME? Per

moulded case circuit breaker having breaking capacity KWatt

ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III [With Enclore]

1 Ea. 1 Providing and erecting busbar chamber confirming to IS- 5731.75 #NAME? Per

375 fabricated from 16 G.M.S. sheet, dust & vermin KWatt

proof having hinged door with rubber gasket and

necessary busbar supports with COPPER busbar having

current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour

insulation tape for phase sequence, three phase &

neutral each suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of

required size with necessary connections. (B) Suitable

for 200 Amp. capacity

Deputy Executive Engineer, Executive Engineer,

Electrical R & B sub-Division, Electrical (R&B) Division,