REPAIR TO INTERNAL ROAD IN MD ACCN OTM ACCN IN ZONE C UNDER GE ROORKEE

Amount

Repair to potholes of depth exc 30cm not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth and making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed, macadam, binder & chippings) complete all as specified and directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. swe- eping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

M&L for Applying evenly a priming/tack coat with bitumious primer of paving bitumen content (VG-10) @ 5 Kg per 10 Sqm of cleaned dry surface by a self propelled or bitumen pressure sprayer equipped for spraying the tack coat uniformly complete all as specified and as directed.

M&L for Bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.5% binder content ( VG-30) by weight of total mix, rolled with power roller exc 8 tonne & n.exc 12 tonne and compacted to required camber and gradient complete all as specified and as directed.

M&L for thermoplastic reflective paint as in road marking 2 mm thick single coat as in centre line or edge line road marking of 100/150 mm width using HOT MARK thermoplastic paint (Hot application) white by indigeneous modern propelled raod marking machine as directed including all ingredients such as binder glass beads Titanium-diaoxide calcium carbonate lintar fillers thermoplastic requirement for glass beads shall be as per the table No. 800-4 specification including spraying of glass beads instrucions complete all as specified and as directed. Note: Make of paint STP, ASIAN or equivalent as approved by GE

Supply and Fixing Solar cat Stud, Exterior Aluminium, Interior; Bullet proof PC, Weight : 950 Gm Approx , Power Supply: Mono Crystalline Solar Cell (5V 60MA), Power Storage Device: Lithium iron battery (3.3V 500 MAH), Lighting Mode: Flash or Steady lighting, LED No : Single side 3 pcs , double side 6 pcs , Dispaly Colour: Red, Visual Distance: 1000m approx , Working Tempreture: -10 Degree Celcius~ 70 Degree Celcius,Starting Intensity : 300 Lux~ 600 Lux , Size 125x60 complete all as specified and as directed.Model No : DA 111 Make - 3M/ Dark eye

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PAMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height above graund and 200mm below ground duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and as directed. Model No : DA 74 Make:- 3M/Dark eye

Excavating in post holes in Hard/dense soil each n. exc. 0.5 cum getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering & removing surplus soil to a distance N.exc 50 m and making good surface .complete all as specified and as directed.

M&L for cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub base,fooundation filling and mass concrete etc.complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S&F retro reflective sign board made up with 1.2 mm thick stainless steel sheet, of which both faces shall be fully covered with high Intensity Prismatic (HIP) Retro Reflective sheeting of approved specification as per MORTH having approved message (Matter and Base) fully processed by pressure sensitive equipment of approved brand (Avery Dennison / 3M) fixed on stainless steel frame made up of SS as described in item no 11.00 complete all as specified and directed.

S & F in repairs of speed bumps breakers made up of ABS plastic PU material rubber and black & yellow colour of size 500mm x 350mm and 74mm with both side aluminium plated reflector, antiskid UV resistence moisture and temperature including fixing using anchor bolts and epoxy mortar grout complete all as specified and directed. Make -DA -1008 Dark Eye /3M

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions (Green/ Yellow/ Red colour) complete all as specified and as directed. Make (a) Future Vista Mumbai item code 38239027

S&F in repair Reflector Complete all as specified and directed. Model No: DA 957. Make : Dark Eye/3M

Demolition of concrete/tiles/kota etc in ground floors and paving exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed

M&L for 75mm thick Cement concrete type B- 2, 1:4:8 (40mm graded aggregate) as in sub base etc complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63mm with broken stone and boulders deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade over 20 mm thick sand made with grey cement and pigment complete all as specified and directed.

M/s Himanshu Tyagi (BID ID -3039390)

Malik Associates (BID ID -3035301)

Alankar Traders (BID ID -3039312)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3033236)