45 MLD Water Supply Project of KINFRA at KINFRA Export Promotion Industrial Parks Ltd, Kakkanad, Ernakulam SH Supplying and laying of D I pumping main from Thorappu junction to KEPIP, Kakkanad Package III.

Amount

PACKAGE III - PIPING WORKS from Throrappu Jn to KEPIP

2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock

2.7.3 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (blasting prohibited)

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.9.1 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock

2.9.3 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Hard rock (blasting prohibited)

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock

od172146/2020_2021 : Filling available excavated earth(excluding rock) in trenches, under floors,plinth,sides of foundation,in areas etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering,lead upto 50m and lift upto 1.5m including cost and conveyance of all materials,labour charges, etc complete at all levels as directed by the Engineer-in-Charge

15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

od172147/2020_2021 : Providing and Fencing 1.5 m high with two rows of full horizontal bamboos tied with coir yarn on vertical bamboos fixed at 1.5 m intervals including rate of putting sign boards temporary bridge for pedestrian crossing, support for Electrical post, pipes,utility lines,cables, cost and conveyance of all materials,labour charges, etc complete at all levels as directed by the Engineer-in-Charge

od172148/2020_2021 : Providing and laying S&S Centrifugally Cast (Spun) K-9 Ductile Iron pipes conforming to IS : 8329 including pressure testing of the pipeline with the required pressure as directed by the Engineer - in - charge: 400 mm

od172149/2020_2021 : Providing and laying S &S Centrifugally Cast (Spun) K- 9 Ductile Iron Pipes conforming to IS : 8329 including pressure testing of the pipeline with the required pressure as directed by the Engineer - in - charge : 600 mm

od172150/2020_2021 : Providing and laying S &S Centrifugally Cast (Spun) K- 9 Ductile Iron Pipes conforming to IS : 8329 including pressure testing of the pipeline with the required pressure as directed by the Engineer - in - charge : 800 mm

18.68.1 : Providing and laying D.I specials of class K - 12 suitable for push - on jointing as per IS : 9523 :Upt 600 mm dia

18.68.2 : Providing and laying D.I specials of class K - 12 suitable for push - on jointing as per IS : 9523 :Above 600 mm dia

18.70.7 : Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:400 mm dia pipes

18.70.10 : Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:600 mm dia pipes

18.70.13 : Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:800 mm dia pipes

18.73.7 : Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :400 mm dia Ductile Iron Double Flanged

18.73.10 : Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :600 mm dia Ductile Iron Double Flanged

od172151/2020_2021 : Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 - 800 mm dia Ductile Iron Double flanged

18.69.1 : Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Upto 600 mm dia

18.69.2 : Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Above 600 mm dia

18.30.9 : Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:400 mm diameter pipe

18.30.12 : Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:600 mm diameter pipe

od172152/2020_2021 : Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:800 mm diameter pipe

od172153/2020_2021 : Cutting of DI pipes of all classes diametrically, the cut being diametrically perpendicular to the axis of pipe and smoothening the cut ends, etc. complete - 400 mm dia pipe

od172154/2020_2021 : Cutting of DI pipes of all classes diametrically, the cut being diametrically perpendicular to the axis of pipe and smoothening the cut ends, etc. complete - 600mm dia

od172155/2020_2021 : Cutting of DI pipes of all classes diametrically, the cut being diametrically perpendicular to the axis of pipe and smoothening the cut ends, etc. complete - 800 mm dia pipe

od172156/2020_2021 : Providing and fixing ISI marked C.I. sluice valves with cap or wheel (with caps below ground level and with wheels above ground level as the case may be) complete with bolts, nuts, rubber insersions etc. (Class II) as per IS 14846 : 2000 - 200 mm

od172158/2020_2021 : Providing and fixing ISI marked C.I. sluice valves with cap or wheel (with caps below ground level and with wheels above ground level as the case may be) complete with bolts, nuts, rubber insersions etc. PN 1.6 as per IS 14846 : 2000 - 400 mm

od172159/2020_2021 : Providing and fixing ISI marked C.I. sluice valves with cap or wheel (with caps below ground level and with wheels above ground level as the case may be) complete with bolts, nuts, rubber etc. PN 1.6 as per IS 14846 : 2000 - 600 mm

od172160/2020_2021 : Providing and fixing ISI marked C.I. sluice valves with cap or wheel (with caps below ground level and with wheels above ground level as the case may be) complete with bolts, nuts, rubber insersions etc. PN 1.6 as per IS 14846 : 2000 - 800mm dia

od172166/2020_2021 : Providing and fixing ISI marked C.I. double acting air valve of approved quality as per IS 14845 : 2000 - 100 mm dia

od172167/2020_2021 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs as the case may be including cost of all jointing materials, coupling, etc. as per IS 7834 or IS 10124 like solvent cement, bolts,nuts, rubber washers, ferule, pipe supports etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 etc complete as directed by the Engineer- In -Charge - 225mm

od172168/2020_2021 : Supplying, handling, welding and laying and painting of MS pipe above ground, of 8 mm thick with specials such as tees, elbows, bends,flanges, checknuts, flanges, tail pieces, clamps, etc.complete - 800mm dia

od172169/2020_2021 : Supplying & stacking quarry sand for filling in standard profile, for stack measurement without causing any hindrance of traffic etc. as directed by the Engineer-in-charge at site including all leads and lifts, cost and conveyance of all materials etc. complete as directed by the Engineer- in -Charge.

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

od172170/2020_2021 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. All work upto plinth level. ( Note:- Minimum Cement content considered in this item is @ 330 kg/ cum.Additional cement requirement as per mix design shall be considered by the bidder while quoting. Nothing extra shall be paid on this account)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

od172171/2020_2021 : Providing and fixing CI manhole cover with frame 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg in concrete slab over manholes/Inspection Chambers/Drains, including cost and conveyance of all materials, all labour charges,lead, lift, sundries, etc., complete. as directed by the Engineer- in-Charge

od172172/2020_2021 : Providing and fixing CI surface box of size 100X100X75 mm inside with hinjed cover as per direction of Engineer in charge

od172178/2020_2021 : Supplying, fixing and commissioning of electromagnetic flow meter, remote sensing type for measuring water in pumping line with stainless steel construction and IP 68 protection, SS 306 junction box, complete with flow transmitter, converter, integrator, totalizer, display unit inside the building, measuring unit inside pump house, suitable for outdoor application, cables from meter to measuring units, power cables from pump house to meter including all accessories - 600 mm line for 20-30 mld

od172181/2020_2021 : Supply of S & S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:400 mm dia Ductile Iron Class K -9 pipes

od172182/2020_2021 : Supply of S & S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:600 mm dia Ductile Iron Class K - 9 pipes

od172183/2020_2021 : Supply of S &S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:800 mm dia Ductile Iron Class K- 9 pipes

od172184/2020_2021 : Supply of DI mechanical joint collars for repair:400mm

od172185/2020_2021 : Supply of DI mechanical joint collars for repair:600 mm

od172186/2020_2021 : Supply of DI mechanical joint collars for repair:800mm

od172188/2020_2021 : Engaging labour as traffic wardens