CERTAIN REPAIR OF PLASTERING, FLOORING AND OTHER BR EM WORK IN TECHNICAL AREA AT AF STATION BAREILLY

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc upto a height of 10 mtr complete all as specified and as directed.

M&L for 15mm thick cement plastering in CM (1:4) mixed with liquid water proofing compound @200ml per 50 kg of cement on other than of fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete upto a height of 10 mtr all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid seperately under respective item of BOQ.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4), surface finished even and fair upto a height of 10 mtr complete all as specified and as directed.

Demolition of cement concrete of any description and in any position etc complete all as specified and as directed.

M&L for cement concrete nominal mix (1: 11/2 :3) grade A0 (using 12.5mm graded stone aggregates) as in hardstanding, flooring etc n.exc 15cm thick with and including use and waste of necessary form work etc complete all as specified and as directed.

M&L for providing, cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and as directed

Demolition of cement concrete (reinforced) as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.

M & L for reinforced cement concrete (nominal mix) (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in chajjas including necessary use and waste of formwork etc complete all as Specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

M & L for glazed ceramic colour tiles as in vertical surface of size (450x 300)mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including over 10mm thick cement plastering in CM (1:4) complete all as specified and as directed.

M & L for preparation of old treated surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion of olive green colour as base coat and making camouflage (sigma pattern) by applying two more coats of different coloured patches in different shapes as directed complete over a coat of exterior primer complete all as specified and as directed. Note:- The painting of sigma pattern shall be as approved by the GE.

M&L for preparation of old plastered/ unplatered surfaces and applying one coat of weather proof exterior emulsion of olive green colour as base coat and making camouflage (sigma pattern) by applying two more coats of different coloured patches in different shapes as directed complete all as specified and as directed. Note:- The painting of sigma pattern shall be as approved by the GE.

M&L for applying SmartCare Damp Proof Ultra fibre reinforced elastomeric liquid applied water proofing membrane as in roof treatment @ 1 Litre per 10 Sq.ft inclusive of all three coats as per following application process: - (a) Prepare the surface by cleaning with high pressure water jet / wire brushes to ensure that it is free of dust, oil, grease, grime and loose particles. (b) Damaged portion if any to be repaired before application of roof treatment as per manufacturer's instructions. (c) Applying self priming coat of SmartCare Damp Proof Ultra duly diluted with water in 3:1 ratio by volume. Allow the primed surface to dry for at least 3-4 hours prior to application of subsequent coat. (d) Applying 2 perpendicular coats of SmartCare Damp Proof Ultra without any dilution to achieve a forced system coverage. Allow it to dry for at least 4-6 hours between two coats. NOTE: - WORK SHALL BE CARRIED OUT BY THE AUTHORIZED APPLICATORS OF THE MANUFACTURER IN CLOSE SUPERVISION OF EXECUTIVE STAFF UP TO ENGINEER-IN-CHARGE LEVEL. MAKE- ASIAN PAINTS or equivalent in STP LTD./ Fosroc

S&F mild steel, plain, black sheet 1.25mm thick as in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F tubes 15mm dia 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F in repais 15mm bore stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, of size (580x450)mm excluding taps, waste, chain and plug and porcelain stopper but including CI brackets complete all as specified and as directed.

M&L for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including over 15mm screed bed in CM (1:6) complete all as specified and as directed.

S&F in repairs wash down water closet vitreous china semi pedestal pattern with P or S trap including connecting to trap and flushing pipe, with and including white PVC seat cover, cast copper alloy CP jet and making good to floor etc complete all as specified and as directed.

S & F in repairs vitreous china urinal half stall pattern including connecting of flushing pipe and out going pipe with and including PTMT waste pipe etc complete all as specified and as directed.

S&F in repairs 10 Ltr PVC flushing cistern low level white with inlet ball valve, float and handle including CI bracket or CP screw including PTMT connection pipe 600mm long 15mm dia etc complete all as specified and as directed.

Taking out old unserviceable street light of any capacity and type complete all as specified and as directed.

Excavation manually in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out in soft/loose soil for laying of cables, foundation of poles and stay assembly complete all as specified and as directed.

Returning, filling in (Soil) including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and as directed.

Removal of excavated soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed.

M&L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable complete all a specified and as directed. Note:- Only punned thickness shall be measured.

M&L for sub class 'B' brick for covering to under ground cable laid dry, flat, transversally width equal to the length of the cable complete all as specified and as directed.

S&F 1100 volts grade heavy duty two single core 2.5 Sqmm size (Nominal Area) PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 2.5 Sqmm size (Nominal size) stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and as directed. Note: - Three single core of 2.5 sqmm and PVC conduit shall be measured and paid as one unit length.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 4 core complete complete all as specified and as directed. Note:- Excavation, earthwork and cable protection shall be measured and paid seperately.

Horizontal boring under road, pavement, hard standing complete for inserting GI pipe light grade of size 50/40 mm dia complete all as specified and as directed. Note :- GI pipe shall be measured and paid seperately

Supply and laying 40mm bore light grade ISI marked GI tubing laid in trenches or inserting in horizontal boring for cable protection including fixing with MS Clamp, nut & bolts etc complete all as specified and as directed.

Supply and fixing die-cast aluminium LED street light fitting 120 watt, IP 66 with high pressure die cast aluminium hosing and heat resistant complete with dirver, lamp and bracket made of light grade GI pipe 32 mm bore and 1.20 mtr long duly bent to shape including 2 Pairs of MS Clamps made out of 40mm x 5mm M.S. flat, nuts, bolts, washers etc complete all as specified and as directed.

S&F steel powder coated double door metal distribution board SPN 4 way, 240 volt with 200 Amps rated bus bar, neutral link, earth bar IP - 43 protection IK - 09 suitable for mounting MCB,s complete all as specified and as directed.

S&F ceilling rose PVC/Poly corbonate isolated body, three terminal complete all as specified and as directed.

S&F MCB single pole and neutral, 240 volt, 6 - 32 Amp breaking capacity 10 KA 'C' curve complete all as specified and as directed.

S&F MCB single pole, 240 volt, 6 - 32 Amp breaking capacity 10 KA 'C' Curve complete all as specified and as directed.

M/s M Aali construction co

Nikunj Bansal Govt Contractor

Zaigham Enterprises

NOORI ENTERPRISES

M/s Agarwal Builders

M/S BABA ENTERPRISES