Fabrication and supply of Crates Sacks and Cages and Arrangement of Vehicles Mechanical Lifting Devices and Accessories in connection with Translocation of Animals to Thrissur Zoological Park Puthur

Amount

ANIMAL CRATES/ SACKS

Crate for maccaques (LTM/Bonnet Maccaque/ Nilgiri Langur etc)-wooden structure - Manufacturing and supplying the cage of size 90x75x68 cm Clear inside measurment as per the detailed measurment, decription and drawing and as per direction of Dept. Officials. Providing wood work as FRAME of cage using 35x35 mm 2nd class teak wood solid wooden battens.Providing and fixing intermediate support 35x 35 mm at 300 mm c/c distance. two supports at each sides, bottom and top.Providing and fixing 12 mm thick Marine plywood platinum IS 710 for SIDES and providing ventilation holes 20 mm dia in two sides with minimum 10 holes each sides.Providing and fixing 12 mm thick Marine plywood platinum IS 710 for FLOOR. Providing and fixing 12 mm thick Marine plywood platinum IS 710 for ROOF. Providing Welded mesh of the size 12 x 12 mm at rear top side. The width of welded mesh may be 100 mm. Providing and fixing 12 mm thick Marine plywood platinum IS 710 for DOOR. The outer frame with C channel is of 40x4mm and the door frame is of 35x35x3 mm.Supplying and fixing good quality hasp and staples for doors.Supplying and fixing best quality 6 lever pad lock (2 nos)for doors.Supplying and fixing good quality MS handle for trasporting the cage

Crates for Maccaques (LTM/Bonnet Maccaque/Nilgiri Langur)-Steel Structure- Manufacturing and supplying the cage of size 90x75x68 cm Clear inside measurment as per the detailed measurment,decription and drawing and as per direction of Dept. officials. Providing MS angle 40x40x4 mm as frames of cage with proper welding and finishing. Providing and fixing 6 mm dia GI Grill 2 inch square size and 12 gauge welded mesh 1x0.5 inch size fixing in the exising frame of 40x4 mm MS flat iron with four sides properly welded & finished. Providing and fixing 1 inch thick second class teak wood planks on the existing frame of the floor with suitable nut and bolts. Manufacturing 2 no. of doors with outer frame of MS Angle 40x40x4mm fixing in main frame after proper welding. fixing 2 nos of door Shutter frame of M S angle 35x35x4 mm. Fixing 2 no. of handles on door. 2 nos door shutter with12 guage welded mesh and 6 mm dia GI grill to be fixed on the existing door frame of 40 x 4mm flat iron with proper 4 welding and finshing. Supplying and fixing good quality Hasp and staple for doors (2 no).Supplying and fixing 6 lever pad lock for doors (2 no). Supplying and fixing steel ring of dia 150 mm on MS bars one at each corner as handle for trasporting the cage

Crate for Small Birds and Animals (Parrots/Cockatoos/Porcupines/Bats/Owls/Tortoise/Turtles etc)- Manufacturing and supplying small parrot cage of size 75x75x25 cms clear inside measurment as per the detailed measurment,decription and drawing and as per the direction from Department officials. Providing wood work as frames of cage using 35x25 mm 2nd class teak wood solid wooden battens.Providing and fixing 9 mm thick Marine plywood platinum IS 710 for sides.Providing and fixing 12 mm thick Marine plywood platinum IS 710 for floor. Providing and fixing 9 mm thick Marine plywood platinum IS 710 for ROOF. Wire mesh of size 12g, 1" x .50" mesh of size width with teakwood reeper on roof at rear portion. Providing and fixing 9 mm thick Marine plywood platinum IS 710 for door and sides with teak wood reepers and suitable hinges for door opening and locking arrangements.Supplying and fixing 100 mm Iron butt hinges (2 nos) for door.Supplying and fixing good quality Hasp and Staple (1 no.) for doors.Supplying and fixing best quality 6 lever pad lock for doors (1 no.).Supplying and fixing MS handle(2 no.) for trasporting the cage.

Crate for Deer (Hog Deer/ Spotted Deer/Black Buck/Tahr etc)-Manufacturing and supplying the SPOTTED DEER cage of size 150X55X120 cms clear inside measurement as per the detailed measurment ,decription and drawing as well as from the direction of Department officials. Providing MS angle 40x40x4 mm frames in cage after proper welding and finishing. Providing and fixing MS flat of 40x4mm as intermediate support @ 500mm c/c distance. Two supports at both sides and Two supports at both top and bottom faces.Providing and fixing 12 mm thick Marine plywood platinum IS 710 for sides and providing ventilation holes in two sides, each side with10 holes of 20 mm dia. Fixing the shutter with the frame with1 inch nut bolt washer for 2 sides. Providing and fixing 19 mm thick Marine plywood platinum IS 710 for floor.Providing and fixing 12 mm thick Marine plywood platinum IS 710 for roof. Providing and fixing 12 mm thick Marine plywood platinum IS 710 for Door- ( 2nos). The outer frame of door is to be fixed with main frame with proper welding and finishing. The outer frame of door is MS Angle of 40x40x4 mm. Shutter frame is of M S angle 35x35x4 mm. providing and fixing 2 intermediate support of MS flat 35x4 mm on both doors fixed at 400mm c/c. Lifting handle on door placed at top centre-30 cm vertical and horizontal (T shaped). Door to be fixed with existing frame and should provide bolt and chain. Supplying and fixing best quality 6 lever pad lock for 2 doors (2 nos). Supplying and fixing steel ring of dia 150 mm of MS bars one at each corner handle for trasporting the cage.

Crate for Sambar Deer/ Nilgai Etc - Manufacturing and supplying the NILGAI/SAMBAR DEER cage of size 180X68X150cms clear indside mesurement as per the detailed measurment ,decription and drawing and as per the direction from Department officials. Providing MS angle 40x40x4 mm work as frames of cage with proper welding and finishing. Providing and fixing MS flat 40x4mm for intermediate support @ 600 mm c/c distance. Two intermediate support at both side face and 2 supports at top and bottom faces.Providing and fixing 12 mm thick Marine plywood platinum IS 710 for sides. Providing ventilation holes in two sides with 10 holes of 20 MM DIA at each side. Fixing the Plywood with the frame using suitable nut bolt and washer at 2 sides. Providing and fixing 19 mm thick Marine plywood platinum IS 710 for floor. Providing & fixing 12 mm thick Marine plywood platinum IS 710 for Doors (2Nos). The frame,MS angle is 40x40x4mm and door shutter with MS Angle 35 x35 x4mm- fixed with nuts and bolts. The outer frame of door to be fixed in main frame with proper welding. Lifting handle frame on door should be at top centre-30 cm vertical and horizontal (T shaped).providing and fixing 2 intermediate support of MS flat 35x4 mm on both doors fixed at 400mm c/c. Door-12 mm thick Marine plywood is to be fixed on existing frame and shall provide with bolt and chain.Supplying and fixing 6 lever pad lock (2 nos) for doors. Supplying and fixing steel ring of dia 150 mm (4 nos) of MS bars 12mm dia one at each corner as handle for trasporting the cage

Crate for Crocodile/ Gharial- Manufacturing and supplying the Crocodile cage of size 195X60X40cms clear inside measurements as per the detailed measurment, discription and drawing and as per the direction from Department officials. Providing wood work as frames of cage using 35x35 mm 2nd class teak wood solid wooden battens. Providing and fixing wood for intermediate support 35x 35 mm at 390mm c/c for both sides and for top and bottom faces. Providing and fixing 12 mm thick Marine plywood platinum IS 710 for sides and also providing 20 mm dia holes of minimum 10 holes on each side. Providing and fixing 12 mm thick Marine plywood platinum IS 710 for floor.Providing and fixing 12 mm thick Marine plywood platinum IS 710 for roof including 2 small window of Wire mesh of size 12gauge, 1" x .50" mesh on roof. The WIRE MESH 250x250 mm shall be fixed with wooden teak reeper and 20mm dia holes of minimum 10 nos. Providing and fixing 12 mm thick Marine plywood platinum IS 710 for 2doors with sliding and locking arrangements. The Outer frames of doors are of dimension 35x35 mm. Providing and fixing good quality hasp and staples (2 no.).Providing and fixing 150 mm tower bolts (4 no.) on doors. Supplying and fixing 6 lever pad lock (2 nos) for doors. Supplying and fixing MS handles (2) for sliding door. Supplying & fixing 100 mm iron butt hinges each door( total 4 no). Supply and fixing MS handle for transporting the cage.

Crate for Large Carnivore (Lion/Tiger)- Manufacturing and supplying the lion cage of size 195X75X105 cms clear inside measurement as per the detailed measurment, discription and drawing and as per the direction from Department officials. Providing MS angle 40x40x6 mm work as frames of cage with proper welding and finishing. And 40x6 mm intermediate support MS flats for sides. Supporting MS flat of 4nos required for 2sides. Providing and fixing 12 mm thick Marine plywood platinum IS 710 for sides with 20 mm dia holes of minimum 10 holes on each side. Inside fixed with 3mm iron sheet with suitable nut and bolt. Providing and fixing Floor of19 mm thick Marine plywood platinum IS 710 on MS flat of 40x6mm @325 mmc/c also with 2 mm thick iron sheet . Provide holes on floor of 20 mm dia. The Whole cage should rest on 50x40 mm iron pegs.Two nos of 25 mm deep removable trays of MS sheet (0.50 mm thick) to be kept below the floor to receive urine and excreta. In the middle a wooden partition to be given to separte the tray. Supplying and fixing 50x50mm x3 mm angle iron as intermediate for bottom for fixing tray. Providing and fixing MS flat bars as intermediate support for roof of dimension 40x6mm at 325 c/c distance. Providing 12 mm thick Marine plywood platinum IS 710 for roof covered inside with 3mm iron sheet. Providing and fixing door of 12 mm dia MS plain bar @ 50 mm c/c which should be welded with frame and covered with 5 mm thick plywood and should provide bolt and chain system for closing and opening the doors. The door frame is 40x40x4mm and and door shutter is 35x35x4 mm. Providing 12mm plain bar at 50mm c/c horizontally with proper welding with frame.Supplying and fixing best quality 6 lever pad lock (2 nos) for doors. Supplying and fixing steel ring of dia 150 mm of MS bars of 12mm, one at each corner as handle for trasporting the cage

Crate for Leopard (Jackal/ Hyena Dhole Etc)- Manufacturing and supplying the Jaguar cage of size 120X60X90cms clear inside measurement as per the detailed measurment, decription and drawing and as per the direction from Department officials. Providing MS angle 40x40x6 mm as frames of cage with proper welding and finishing.Providing and fixing 12 mm thick Marine plywood platinum IS 710 for sides supported by MS flat of 40mmx6mm thick at the distance of 600mm C/C. Inside cover with iron sheet of thickness 3mm. Also provide minimum 10 holes 20mm dia on each side. Floor-19 mm thick Marine plywood platinum IS 710 on MS flat bars of 40x6mm fixed @ 300 mm c/c and fixed on with 2 mm thick iron sheet. Holes on floor 20 mm dia of minimum 10 nos. The whole cage should rest on 50x40 mm iron long pegs.Provide two nos of 25 mm deep removable trays of MS sheet of 0.50mm thick for keeping below the floor to receive urine and excreta. Providing wooden partion at the middle to keep trays separate. Supplying and fixing 50x50x3 mm angle iron at bottom for fixing tray.Providing and fixing Roof with12 mm thick Marine plywood platinum IS 710 and covered inside with 3mm thick iron sheet. Providing MS flat 40x6mm as intermediate supports at distance of 300mm c/c for roof. Providing and fixing door with 12 mm dia MS plain bar @ 50 mm c/c which should be welded with frame and covered with 5 mm thick marine plywood; Bolt and chain system for closing and opening of two doors. The door frame is 40x40x4mm and Door shutter is 35x35x4 mm iron frame. Providing 4 no. of lifting handles.Supplying and fixing 6 lever pad lock (2 nos) for doors.Supplying and fixing steel ring (4nos)of dia 150 mm of 12mm MS bars one at each corner as handle for trasporting the cage.

Crate for Bear-Manufacturing and supplying the Bear cage of size 180X75X100 cms clear inside mesurement as per the detailed decription and drawing and as per the direction from Department officials. Providing MS angle 40x40x6 mm work as frames of cage with proper welding and finishing. Providing and fixing sides with 12 mm thick marine ply wood platinum IS 710 and supported by MS flat of 40mmx6mm thick at a distance of 600mm C/C. Fix 4 nos of MS flats at two sides.The inside is to be covered with iron sheet of thickness of 3 mm. Providing and fixing Floor of 19 mm thick Marine plywood platinum IS 710 on MS flat @ 300mm C/C. Floor covered from inside with iron sheet of 2 mm thick. The holes on floors is of 20 mm dia and the cage should rest on 50 x 40mm iron long pegs. Two 25mm deep removable trays of MS sheet of 0.50 mm thick to be kept below the floor to receive urine and excreta. Supplying and fixing 50x50mm x3 mm angle iron for fixing tray with intermediate of wooden partition to separate trays. Providing and fixing Roof of 12 mm thick Marine plywood platinum IS 710 covered inside with 3mm thick iron sheet. Providing MS flat 40x6mm at 300 mm c/c as intermediate support of roof. Providing and fixing of door with intermediate supports of 12 mm dia MS plain bar @ 50 mm c/c which should be welded with frame and covered with 5 mm thick plywood. Provide bolt and chain system for closing and opening the 2 doors.The door frame is 40x40x4mm and shutter is 35x35x4 mm iron frame.Providing 4 No. of lifting handles. Supplying and fixing good quality 6 lever pad lock (2 nos) for doors. Supplying and fixing steel ring (4 nos) of dia 150 mm of 13mm MS bars one at each corners as handle for trasporting the cage.

Crate for Rhinoceros and Hippopotamus- Manufacturing and supplying the Rhinoceros cage of size 300X135X180 cms clear inside measurement as per the detailed measurment, discription and drawing and as per the direction from Department officials. Providing and fixing MS angle 65x65x8mm as frame of cage with proper welding and finishing. MS angles of dimension 40x40x6mm to be provided as intermediate supports for both sides, top and bottom with 60cm c/c distance vertically. Providing and fixing 19mm thick Marine plywood platinum IS 710 fixed on steel frame as sides. Narrow slits in plywood on each sides to be provided. Providing & fixing wooden planks of 50 mm thick 2nd class teak wood on floor. Providing and fixing wooden planks in roof of 50 mm thick 2nd class teak wood. Providing 2 Doors by fixing on MS angle 65 x65 x8 mm frame. The shutter frame of door is 40x40x4mm. Provide 16mm plain MS bars at 100mm C/C hrizontally on each doors.Providing 3nos of 50 mm dia GI pipe as horizontal support on each door with a hole of 15 mm dia on GI Pipe for locking purpose on both doors. Providing 2 no. of lifting handles. Supplying and fixing 6 lever pad lock (2nos) for doors. Supplying and fixing steel ring (4nos)of dia 150 mm of 12mm MS bars one at each corner as handle for trasporting the cage.

Crate for Gaur/Zebra- Manufacturing and supplying the GUAR cage of size 240X120X180 cms clear inside mesurement as per the detailed measurment, discription and drawing and as per the direction from Department officials. Providing and fixing MS angle Frame- 65x65x8mm as frame of cage with proper welding and finishing. Providing 3nos of horizontal and 3 nos of vertical MS flats 80x8mm as intermediate support at both sides.Providing and fixing Marine plywood platinum IS 710 of 1.5 inch thickness and with multiple holes of 2 inch dia as sides.Providing and fixing 2 inch Second class teak wood battons for floor. Also providing 80x8 mm MS flats at 20 cm C/C at Floor for intermediate support. For Roof, provide Iron square rods of 12 mm size (long-10 nos and short rods-20 nos) as grill. The rods are to be welded and 5 inch c/c distance to be provided. Providing & fixing 2 Door Frames of 65x65x8 mm on MS Angle frame. Providing and fixing 2 door Shutter frame of 40x40x4mm. Providing 4MS Flats Horizontal and 4 MS flats vertically as intermediate supports of 80x8mm size for both the doors. Providing and fixing with marine plywood of 1.5 inch thick as cover for both the doors. Providing 4 door lifting handles with locking arrangement. Supplying and fixing 6 lever pad lock (2 nos) for doors. Supplying and fixing steel ring of dia 150 mm of 12mm MS bars one at each corner as handle for trasporting the cage.

Crate for Giraffe- Manufacturing and supplying the GIRAFFE cage of size 240X120X275 cms clear inside mesurement as per the detailed measurment, decription and drawing and as per the direction from Department officials. Providing and fixing frame of cage with 50x50 mm 2nd class teak wood at 45 cm c/c. Out of this, provide horizontal battons of 3 Numbers at each sides and 6 vertical battons at each sides. At the back side 3 no of vertical and horizontal battons to be fixed. Providing and fixing 12 mm thick Marine plywood platinum IS 710 and wire mesh with teak reeper as side covering on two sides. Providing and fixing 12mm thick Marine plywood at the back side also.Providing and fixing50x50mm wooden batten as Floor and Roof as intermediate supports. Provide and fix 19 mm thick Marine plywood on floor. Marine plywood of 12mm thick to be furnished on roof.Providing and fixing door Frame of 50x50 mm 2nd class teak wood with 45 cm c/c distance. Vertical 4 battons and Horizontal 3 nos to be provided. Providing 12 mm thick Marine plywood platinum as door covering. Providing heavy duty 8 nos 6 inch hinges with door and suitable handle for locking arrangement as per direction from the department offcials. Providing Iron aldrop (2 nos) of 200 mm long. Supplying and fixing 6 lever pad lock (2 nos) for doors. Supplying and fixing 8 nos of MS handles for transporting the cages. Supplying and fixing 4 long wooden battens for support of the cage at both sides.

Supply Crate for Pheasants/kites/owls etc Durable heavy duty metal dog cage with single door design for front entry and exit design size 36 inch (L91 cm x W59 cm X H 63 cm)

Supply of Crate for Pelicans, storks peafowl etc Large Andes dog carrier-100X67X80 cm; 11.0kg made from sturdy wipe-clean plastic

Supply of Sack for small snakes Poly cotton good quality sack of dimension 60X30X30 cm

Supply of Sack for medium snakes Polycotton sack good quality of dimension 165X 30X 30 cm

Supply of sack for large snakes Polycotton sack good quality of dimension190X65X 65 cm

Supply of Sack for very large Snakes Polycotton good quality sack of dimension 500X100X100 cm

TRANSPORTATION-VEHICLES AND LABOUR CHARGES

Hiring Heavy trucks of 18 feet- 7 tonne capacity for transporting Gaur, Bonnet Maccaque, Spotted deer, Hog Deer, Black buck, sambar deer, muggar, Hippopotamus etc-4 trips-Puthur to Thiruvananthapuram and Back covering 2320 Km; One trip from Puthur to Neyyar and back covering 600 kilometers. 28 trips from Puthur to Chembukkavu Zoo and back covering 672 kilometers. The requirement of no of trucks and the dates on which required will be intimated one week in advance. The requirement will be spread over entire contract period.

Hiring Mini Truck-4 tonne capacity for transporting LTM,Parakeets, cormorants, Heron, whistling teal, swamphen, egrets, pelicans, storks, Gharial, Lion, Tiger, Leopard, Jackal, Hyena, Ostrich, Rhea, Emu, Owls, Porcupines, Jungle cat, Palm civet, Kites, Peacock, Pheasants, Partridge etc-2 trips from Puthur to Thiruvananthapuram and Back covering 1160 kilometers. 20 trips from Puthur to hembukkavu Zoo and back covering 480 kilometers. Total -1640 kilometers. The requirement of no. of vehicles will be intimated one week in advance. The requirement will be spread over entire period of contract.

Hiring Mahindra Camper for snakes, tortoises, turtles, Lizard- 6 trips from Puthur to Chembukkavu Zoo and back covering 144 kilometers. The requirement of no. of vehicles will be intimated one week in advance.The requirement will be spreadover entire contract period.

Hiring 12 tonne hydraulic cranes for lifting and unlifting the animal crates of Gaur,Spotted deer, Hog Deer, Black buck, sambar deer, Lion, tiger, Leopard, jackal, Muggar, Hippopotamus

Service of skilled mazdoor for transportation of all animals

Engaging unskilled mazdoor for loading and unloading of all the animals

OTHER REQUIREMENTS FOR TRANSLOCATION

Food for officials/staffs/Volunteers/Labourers etc

Breakfast-

Forenoon tea

Lunch-

Mineral Water Bottle

Afternoon tea

Dinner

Poly propylene twist rope with 10-12mm diameter

Brown curled 4 twist coir rope 20mm diameter

Coarse Sand

Gunny bags- jute bags of size 112 cmx 68 cm

Heavy duty Platform trolley with load bearing capacity 1000kg of dimension 1200 mmx 750 mm

Handling trolley of 500 kg load bearing capacity of MS steel dimension 910 x 610 x 860mm

Lifting chain slings 4 legged made of metal 5Mnv

Rubber mat (Cow mats) of size 7' x 4' x 25 mm for placing onfloor and sides of cages

KURIAKOSE K P