REPAIRS MAINT OF STEEL FURNITURE ITEMS TRADE PATTEREN AND OPS WORK FURNITURES INCLUDING PAINTING AND POLISHING ETC AT JOSHIMATH RUDRAPRYAG GAUCHER HARSIL SUKHI TEKLA NELONG MANA AULI TAPOVAN AND NARENDRA NAGAR UNDER GE 871 EWS

Amount

Charpoy GI Pipe Double Bunk

Removing old unserviceable plywood of double sleeping bunk/charpoy and S & F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge

Removing old unserviceable legs & S & F new legs of existing size, shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge

Preparation of old painted outer steel surfaces by scraping with emary paper, cleaning, dusting and applying Two coat of synthetic enamel painting with Silver Shade as process spray painting

Charpoy OR steel FD/E6/MAP-II/01 FD- 220R

Removing old unserviceable plywood of charpoy and S & F new marine plywood of 12 mm thick BWR grade, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge

Removing old unserviceable long rail and S & F new Long Rail of existing size, shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge

Removing old unserviceable Short Rail and fixing Short Rail by conversion of Long Rail to Short Rail obtained from item No.2.20 of existing size and shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer -in- Charge

Removing old unserviceable Legs and fixing legs by conversion of Short Rail to Legs obtained from item No. 2.30 of existing size and shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge

Preparation of old painted outer steel surfaces by scraping with emary paper, cleaning, dusting and applying Two coat of spray painting of Olive Green/Black Shade of approved quality paint

Charpoy GI pipe ( Drg No FD-220)

S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy. Make : Jindal/Ravindra/Tata

Conversion of 32 mm dia long rail obtained from item No 3.10 above into two short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow. Note : Count one short rail each for this item

Conversion of 32 mm dia short rail obtained from item No 3.20 above into two leg after cutting and threading one ends fixing to 3 way 32 mm dia existing elbow at one end threaded and cover the other end with hard rubber/PVC shoe. Note : Count one leg each for this item

S & F in repairs 3 way 32 mm dia GI elbow ISI marked complete as per specified.

S & F in repairs check nuts of 32 mm dia ISI marked complete as per specified.

S & F in repairs 12 mm BWR phenol bonded commercial plywood of existing size including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood. Make - Archid Ply/Green Ply/Century Ply

S & F in repairs MS flat of size 40x4mm with two Nos nut & bolts as stiffener shall be fitted for support of plywood.

Chair verandah (FD-256)

S & F in repair MS conduit 20mm bore,1.6mm thick, upto 30cm length, made to shape, duly welded components of Chair verandah all as specified and as directed.

Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour.

Single Sleeping Bunk of MS 32 MM Pipe and 12 MM Plywood on top Without Head Rest , FD-02 GE 871 EWS

Removing old unserviceable plywood of Single sleeping bunk/charpoy and S & F new marine plywood of 12 mm thick BWR grade, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engr-in-Charge.

S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, fixing duly welded both end as existing. Make : Jindal/Ravindra/Tata

Conversion of 32 mm dia long rail obtained from item No 5.2 above into two short rail after cutting and one short rail fixing duly welded both ends . Note : Count one short rail each for this item

Conversion of 32 mm dia short rail obtained from item No 5.3 above into two leg after cutting and one leg fixing duly screwed/welding/tightening as existing Note : Count one leg each for this item

Frame Shall be two coats of Synthetic Enamel Paint of Silver Shade complete all as specified. Make :Paint shall be Make of Asian/Shalimar/Berger and directed by Engr-in-Charge.

Double sleeping Bunk with head & foot rest made of 32 mm MS pipe 12 mm plywood on both frame Drg No 06 GE 871 EWS

Removing old unserviceable Plywood of Double Sleeping Bunk/Charpoy and S&F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked , Make: Archid ply/ century ply/ Green ply/Kit ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-charge.

S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked ,fixing duly welded /Screwed both end as existing. Make : Jindal/Ravindra/Tata

Conversion of long rail obtained from item No 6.2 above into two numbers short rail after cutting and threading/Welding both ends and fixing as per existing

Removing old unserviceable Legs & S&F new Legs of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge. All joints duly welded/screwed as per Drgs

Frame Shall be painted with two coats of Synthetic Enamel Silver paint. Paint should be of Make Asian/Shalimar/Berger as approved by GE.

Almirah steel med (FD 67/1032)

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unserviceable one all as specified and as directed (Make of Lock- Harrison/Reena/Link)

S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unserviceable one all as specified and as directed.

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting) (Make of Lock- Harrison)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer.

Preparation of old painted inner steel surfaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel surfaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Almirah steel large (FD-67/1031)

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unserviceable one all as specified and as directed (Make of Lock- Harrison)

S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unserviceable one all as specified and as directed

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting) (Make of Lock- Harrison)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer.

Preparation of old painted inner steel surfaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel surfaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Steel Almirah Locker with two Partition 91cmX48cmX181.5cm ( FD 11 Engr-in-Charge 871 EWS)

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unserviceable one all as specified and as directed (Make of Lock- Harrison/Reena/Link)

S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unserviceable one all as specified and as directed.

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting) (Make of Lock- Harrison)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer.

Preparation of old painted inner steel surfaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel surfaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Removing the existing unserviceable Hanging Rod, S & F new Hanging Rod of SS match the existing as specified and as directed in both compartment

Locker Bed Side Steel (FD-1029)

S & F Handle 100 mm size chromium plated Heavy components of Locker steel including dismantling unserviceable one all as specified and as directed.

S & F Hasp & staple chromium plated components of Locker steel including dismantling unserviceable one all as specified and as directed.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size, Haps and Staple of approved quality, painting with one coat of synthetic enamel paint shade as directed by Engr-in-Charge over a coat of primer inside and outside and Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall be applied after preparation of surface all as specified and shown on drawing. Note:- All steel surface shall be done with spray painting and Make of Lock- Harrison/Rina/Link

Removing the existing worn out side holder with 20mm dia aluminium conduit pipe of locker bed side steel and S & F new side holder with 20mm alluminium conduit pipe as per existing. Shape and size shown on drawing all as specified and directed by Engr-in-Charge.FD-1029

Preparation of old painted inner steel surfaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel surfaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Locker Bed Side Steel( SKD-562 )

Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall after preparation of surface all as specified and shown on drawing directed by Engr-in-Charge.SKD-562

Removing the existing unserviceable handle and S & F new handle chromium plated 100mm in Heavy pattern all as specified and directed by Engr-in-Charge.SKD-562

3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

Removing the existing worn out side holder and hanging conduit pipe of locker steel and S & F of new side holder and hanging conduit pipe as per existing shape and size shown on drawing and all as directed by Engr-in-Charge.SKD-562

Taking down old unserviceable existing lock of locker steel and S & F new lock 7 lever duplicate key all as specified and directed by Engr-in-Charge. SKD-562

Removing the existing unserviceable hinges and S & F new hinges duly welded as per existing shape and size all as specified and directed by Engr-in-Charge.SKD-562

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside. And outside Two coat of spray painting of Hammertone paint ( pattern of hammertone shall be 0.06gr silicon/kg) Shall after preparation of surface complete all as specified and shown on drawing. Note :- All steel surface shall be done with spray painting and Make of Lock- Harrison

Preparation of old painted inner steel surfaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/ger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including removal of dents/bends all as specified and as directed. Note:- Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as approved by Engr-in-Charge.

Locker Bed Side (FD 14 & 15 Engr-in-Charge 871 EWS):-

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed (Make of Lock- Harrison/Reena/Link)

S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed.

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting) (Make of Lock- Harrison)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer.

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Table dinning ORs steel with Aluminium Top

S & F Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion of Table dinning ORs steel including dismantling unserviceable one all as specified and as directed.

Table top in repair made of 12mm thick Particle/MDF Board one side white and one side teak finish laminated duly edging with .75 inch beading of approved quality. Make of Board : Archid Play, Bhutan Ply, Green Ply, Century Ply

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality.

S & F in repair PVC shoe in Table dinning ORs steel with Aluminium Top complete all as specified.

Single Sleeping Bunk of MS 32 MM Pipe and 12 MM Plywood on Top With Head Rest FD06GE 871 EWS

Removing old unserviceable plywood of double sleeping bunk/charpoy and S & F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by BSO

S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, fixing duly welded both end as existing. Make : Jindal/Ravindra/Tata

Conversion of 32 mm dia long rail obtained from item No 14.2 above into two short rail after cutting and one short rail fixing duly welded both ends . Note : Count one short rail each for this item

Conversion of 32 mm dia short rail obtained from item No 14.3 above into two leg after cutting and one leg fixing duly screwed/welding tightening as existing Note : Count one leg each for this item

Frame Shall be two coats of Synthetic Enamel Paint of Silver Shade complete all as specified. Make :Paint shall be Make of Asian/Shalimar/Berger approved by Engr-in-Charge.

Chair Revolving with Arms(TP);-

Removing old unserveceable Hydraulic mechanism and S & F new Hydraulic mechanism of approved quality complete all as specified. Make of Hydraulic Mechanism :-CSS Power Hydraulic, P P CHAIR Power Hydraulic and equal

Removing old unserviceable castor wheel and S & F new castor wheel of approved quality complete all as specified. Make of Seltos/Breewell & PP Chair

Removing old unserviceable hand rest and S & F new one as existing shape and size shall be fitted with suitable nut bolt/welding with all iron surface directed to view when placed in position shall be painted with enamel paint using spray machine to match the colour all as directed of approved quality directed by Engr-in-Charge make of : PP Chair/Rajchief and Breewell

Removing old unserviceable back frame from Chair Revolving and S & F new back frame complete as existing moulded PU foam seat duly covered with finest quality rexine/tepstray cloth complete of existing size, shape, pattern complete all as specified and shown on drg and directed by Engr-in-Charge

Removing old unserviceable Seat frame from Chair Revolving S & F new Seat frame complete as existing moulded PU foam seat duly covered with finest quality rexine/tepstray cloth complete of existing size, shape, pattern complete all as specified and shown on drg and directed by Engr-in-Charge

Table 3'X2' Steel with/without drawar

Removing the existing unserviceable top of Table and S & F the same made of 18mm thick pre laminated MDF board /Particle Board , one side laminated finish including provision of 4mm thick teak wood beading all as specified and directed

Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Olive green synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of Asian/Shalimar/Berger approved by Engr-in-Charge.

Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge shape complete all as specified and shown on drg .All Joints duly welded/Screwed as per Drgs

Chair steel tubular with/ without arms (FD-75 M)

S & F Seat frame of Chair steel tubular with/ without arms made out of First class teak wood ,french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unserviceable one all as specified and as directed.

S & F Back frame of Chair steel tubular with/ without arms made out of First class teak wood ,french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unserviceable one all as specified and as directed.

S & F Handle made of Teak wood duly black paint synthetic enameled and fixed to the chair tubular with arms with screws of suitable size complete all as per drawing including dismantling unserviceable one all as specified and as directed.

S & F MS Flat size 25 x 25 x 4mm thick welded at four corner at bottom of the seat only to support and screwed with the seat at two places complete all as per drawing. including dismantling unserviceable one all as specified and as directed.

M&L for preparation of sufaces and painting with synthetic enamel paint BL Greay colour to chair steel tubular with without arms including 04 Nos of PVC bushes to the bottom of the chair frame and 02 Nos of PVC caps on the top of the frame complete all as specified and directed.

Chair writing (MAP)/Steel

S & F following components of chair writing (MAP)/Steel (approved quality) including dismantling one all as specified and as directed. (a) Seat & Back .

(b) Handle

(c) M&L for painting two coats of Black paint in iron frame of chair writing (MAP)/Steel after scraping old paint/rusted parts by emery paper.

Table office officer/clerk steel (FD-84/1003,1004 )

S & F following components of Table dinning ORs steel including dismantling unserviceable one all as specified and as directed. Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade & quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer

Lock of 6 levers with duplicate keys

Side panel made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade of approved quality over a coat of primer both inside and outside including preparation of surfaces.

Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of following type;-(i)Table office officer

Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of following type;- (ii)Table office Clerk

PVC shoe

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed

Rack steel large 6 Tier FD-129(M)/1038

S & F following components of Rack steel 6 tier including dismantling unserviceable one all as specified and as directed. MS angle iron of size 30 x 30 x 3mm thick, 1905mm long including painting with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

Shelves of size 760 x 915mm made of 1mm CRCA sheet including painting with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed

Bed hard steel (FD/E6/MA/P/08)

S & F following components of Bed hard steel including dismantling unserviceable one all as specified and as directed. (a) 12mm thick BWR phenol bonded commercial plywood on top of the bed. Make : Greenply/Archid Ply/Century Ply

(b) Head Board 18mm thick prelaminated particle board including 04mm PVC beading.

(c) Foot Board 18mm thick prelaminated particle board including 04mm PVC beading.

(d) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Black synthetic enamel paint including four Nos of hard rubber shoes.

Chair School Hand Board Trade Pattern

S&F hand board made out of 18mm thick made of particle/MDF Board with 4mm TW beading duly polished including dismantling unserviceable one all as specified and as directed.

S&F PVC Frame (Seat & Back) as per drg Make- Supreme/ Neelkamal

M&L for painting two coats of Synthetic Enamel Paint on Iron Frame including scraping old paint/rusted parts by emery paper and fixing of four Numbers of rubber Shoe.

Double sleeping Bunk without head & foot rest made of 3.5/3.5 CM & 3.3/3.3 CM MS square pipe alongwith 12 mm plywood on both frame (Drg No 07 GE 871 EWS)

Removing old unserviceable Plywood of Double Sleeping Bunk/Charpoy and S&F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked , Make: Archid ply/ century ply/ Green ply/Kit ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-charge.

S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked ,fixing duly welded /Screwed both end as existing. Make : Jindal/Ravindra/Tata

Conversion of long rail obtained from item No 23.2 above into two numbers short rail after cutting and threading/Welding both ends and fixing as per existing

Removing old unserviceable Legs & S&F new Legs of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge. All joints duly welded/screwed as per Drgs

Frame Shall be painted with two coats of Synthetic Enamel Silver paint. Paint should be of Make Asian/Shalimar/Berger as approved by GE.

m/s MD pandey sons