Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-AOC 18 837 KILIYARAA HOUSE PERUMPADAPPU PALLURUTHY PO KOCHI 682 006 | KOCHI | ERNAKULAM | KERALA | 682006 | ₹2.9 L | L1 | Accepted-AOC L1 |
| 2 | L2₹3.4 L+₹48,631 (16.5%)Rejected-Finance | ₹3.4 L+₹48,631 (16.5%) | L2 | Rejected-Finance Rejected due to not being L1 |
| 3 | L3₹4.2 L+₹1.3 L (44.2%)Rejected-Finance CHATHANATTU HOUSE XXIII 362B 1 AYYANKALI ROAD EDAKOCHI KOCHI 682 010 | KOCHI | ERNAKULAM | KERALA | 682010 | ₹4.2 L+₹1.3 L (44.2%) | L3 | Rejected-Finance Rejected due to not being L1 |
| 4 | L4₹5.1 L+₹2.2 L (74.2%)Rejected-Finance | ₹5.1 L+₹2.2 L (74.2%) | L4 | Rejected-Finance Rejected due to not being L1 |
| 5 | L5₹5.2 L+₹2.3 L (76.9%)Rejected-Finance 27 2387 A CHITTUTHARA SASTRI NAGAR SMARTO ROAD KADAVANTHARA KOCHI 682 020 | ERNAKULAM | KERALA | 682020 | ₹5.2 L+₹2.3 L (76.9%) | L5 | Rejected-Finance Rejected due to not being L1 |
| Sl No | Description | Qty | Unit | ANIE JOHN CONTRACTORS L3 | Vidya constructions L4 | Aarjay Tech Engineering L5 | Anaswara Constructions L1 | REIGN CONSTRUCTIONS L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the permises complete all as specified and directed. | 140 | Sqm | 30 ₹4,200 Lowest | 40 ₹5,600 | 50 ₹7,000 | 35 ₹4,900 | 50 ₹7,000 |
| 2.00 | M&L for 25mm thick PCC Type B-1, 1:2:4 (20mm graded crushed stone aggregate) complete all as specified and directed. | 65 | Sqm | 200 ₹13,000 Lowest | 400 ₹26,000 | 300 ₹19,500 | 220 ₹14,300 | 250 ₹16,250 |
| 3.00 | M&L for non - skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors with approved pattern including 15mm thick screed bed in CM 1:4 etc set and jointed in neat cement slurry and pointed in epoxy tile joint filling complete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of the cost of epoxy tile joint filling and nothing extra shall be admissible on this account. | 15 | Sqm | 1,000 ₹15,000 | 1,500 ₹22,500 | 1,200 ₹18,000 | 1,050 ₹15,750 | 900 ₹13,500 Lowest |
| 4.00 | M&L for glazed ceramic tiles in vertical surface area of each tile exceeding 0.18 Sqm but not exceeding 0.72 Sqm, 6-7mm thick set and jointed in neat cement slurry including 10 mm thick backing coat in CM 1:4 on fair face of brick work or concrete surfaces set and jointed in neat cement slurry etc and pointed in epoxy tile joint filling complete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of the cost of epoxy tile joint filling and nothing extra shall be admissible on this account. | 60 | Sqm | 1,000 ₹60,000 | 1,700 ₹1,02,000 | 1,100 ₹66,000 | 980 ₹58,800 | 900 ₹54,000 Lowest |
| 5.00 | M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm and n.exc 2.00 Sqm, in floors etc. with approved pattern including 15mm thick screed bed in CM 1:4 etc set and jointed in neat cement slurry and pointed in epoxy tile joint filling complete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of the cost of epoxy tile joint filling and nothing extra shall be admissible on this account. | 50 | Sqm | 1,000 ₹50,000 Lowest | 1,300 ₹65,000 | 1,250 ₹62,500 | 1,050 ₹52,500 | 1,100 ₹55,000 |
| 6.00 | M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm and n.exc 2.00 Sqm, as in vertical surfaces such as skirtings, with approved pattern including 10 mm thick backing coat in CM 1:4 on fair face of brick work or concrete surfaces finished to receive tiles and pointed in epoxy tile joint filling complete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of the cost of epoxy tile joint filling and nothing extra shall be admissible on this account. | 15 | Sqm | 1,000 ₹15,000 Lowest | 1,400 ₹21,000 | 1,300 ₹19,500 | 1,100 ₹16,500 | 1,100 ₹16,500 |
| 7.00 | Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area not exc 1.5 sqm each of size complete all as specified and directed. | 5 | Each | 100 ₹500 Lowest | 150 ₹750 | 290 ₹1,450 | 100 ₹500 Lowest | 100 ₹500 Lowest |
| 8.00 | S&F Fiber Glass Reinforced plastic (FRP) door frames of cross section 90mm x 45 mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness, the laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as directed by the Engineer-in-Charge. | 10 | Rm | 950 ₹9,500 | 1,500 ₹15,000 | 7,000 ₹70,000 | 500 ₹5,000 Lowest | 750 ₹7,500 |
| 9.00 | S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-Charge. | 5 | Sqm | 5,250 ₹26,250 | 6,800 ₹34,000 | 4,000 ₹20,000 | 3,800 ₹19,000 Lowest | 4,500 ₹22,500 |
| 10.00 | S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples, chains hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. | 5 | Kg | 150 ₹750 | 125 ₹625 | 300 ₹1,500 | 160 ₹800 | 120 ₹600 Lowest |
Tender Value
₹4.5 L
EMD Value
₹9,000
Closing Date
24 Aug 2026, 6:00 pmClosed
GE(NW)KOCHI
GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004
AS PER BOQ AND TENDER DOCUMENT
2026_MES_781508_1
8664_GE_NW
Open Tender
Civil Works
Item Rate
180 days
KOCHI
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE(NW)KOCHI
₹9,000
17 Sept 2026
29 Jul 2026
31 Aug 2026
29 Jul 2026
24 Aug 2026
12 Aug 2026
29 Jul 2026 - 12 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the permises complete all as specified and directed. | 140 | Sqm | - | - |
| 2 | M&L for 25mm thick PCC Type B-1, 1:2:4 (20mm graded crushed stone aggregate) complete all as specified and directed. | 65 | Sqm | - | - |
| 3 | M&L for non - skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors with approved pattern including 15mm thick screed bed in CM 1:4 etc set and jointed in neat cement slurry and pointed in epoxy tile joint filling complete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of the cost of epoxy tile joint filling and nothing extra shall be admissible on this account. | 15 | Sqm | - | - |
| 4 | M&L for glazed ceramic tiles in vertical surface area of each tile exceeding 0.18 Sqm but not exceeding 0.72 Sqm, 6-7mm thick set and jointed in neat cement slurry including 10 mm thick backing coat in CM 1:4 on fair face of brick work or concrete surfaces set and jointed in neat cement slurry etc and pointed in epoxy tile joint filling complete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of the cost of epoxy tile joint filling and nothing extra shall be admissible on this account. | 60 | Sqm | - | - |
| 5 | M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm and n.exc 2.00 Sqm, in floors etc. with approved pattern including 15mm thick screed bed in CM 1:4 etc set and jointed in neat cement slurry and pointed in epoxy tile joint filling complete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of the cost of epoxy tile joint filling and nothing extra shall be admissible on this account. | 50 | Sqm | - | - |
| 6 | M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm and n.exc 2.00 Sqm, as in vertical surfaces such as skirtings, with approved pattern including 10 mm thick backing coat in CM 1:4 on fair face of brick work or concrete surfaces finished to receive tiles and pointed in epoxy tile joint filling complete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of the cost of epoxy tile joint filling and nothing extra shall be admissible on this account. | 15 | Sqm | - | - |
| 7 | Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area not exc 1.5 sqm each of size complete all as specified and directed. | 5 | Each | - | - |
| 8 | S&F Fiber Glass Reinforced plastic (FRP) door frames of cross section 90mm x 45 mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness, the laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as directed by the Engineer-in-Charge. | 10 | Rm | - | - |
| 9 | S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-Charge. | 5 | Sqm | - | - |
| 10 | S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples, chains hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. | 5 | Kg | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.34 MB
Tender8664.pdf
Tender Documents • 0.64 MB
PS8664.pdf
Additional Documents • 0.49 MB
Testing.pdf
Additional Documents • 0.23 MB
BOQ_875475.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .