CA NO. CWE/HILLS/PGH/71 OF 2024-2025 PROVN OF FOOT BRIDGE ALONGWITH RETAINING WALL TO CONNECTED BLDG NO. T-21 TO AREA ACROSS CHARMAGAD NALA NEAR BLDG NO T-65 AT CHARMAGAD UNDER GE PITHORAGARH

Amount

Earth work in all kind of soil excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width ) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed.

Earth work in hard rock excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width ) including getting out and disposal of excavated material lead upto 50 m and lift upto 1.5m, complete all as specified and directed.

All as per iem No 02 above but for each additional 1.5 m or part there of in depth beyond the first 1.5 mcomplete all as specified and directed.

Returning, filling in,hard and dense soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated material Rock exc 250m but n.exc. 500m and depositing where directed complete all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out hard and dense soil complete all as specified and directed.

M&L soil filling in foundation spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and directed.

M&L for RCC M-30 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed.

M&L for form work on square, rectangular etc to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and directed.

M&L for form work on circular plan to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and directed.

M&L for RCC M-30 (Design Mix) as in columns, pillars, piers etc complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200 mm thick for rough finished concrete surface complete all as specified and directed.

M&L for RCC M-30 (Design Mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8 mm cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to complete all as specified and directed.

All as item No.17 above but, 5 mm dia and upto over and incl 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for 5 mm thick cement plasterd on fair faces of brick work or concrete surface on wall in CM 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of concrete surface with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

S&F Joist, channel, angle, or tee sections,beam section etc fixed independently, with or without connecting plates, etc. Fe 410 W Gde E 250 quality A complete all as complete all as specified and directed

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W Gde E 250 quality A with riveted, bolted or welded attachmenet complete all as complete all as specified and directed .

S&F frames including stringers, treades, landing, balusters, hand rails, flat iron etc. including cleats, brackets, etc Fe 410 W Gde E 250 quality A complete all as complete all as specified and directed.

S&F Mild steel bolts Diameter of neck (exc 12mm n exc 20mm) purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed.

S&F Mild steel screw bolts (machine made) dia 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm but n exc 10 cm long complete all as specified and directed.

M & L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed. Note:- Weight of chain link fencing will be decided by BOO conveyed by GE.

m/s MD pandey sons (BID ID -3179944)