SPL REPAIR TO BLDG NO P-32 AND BATHROOMS AT ARO COMPLEX AT MIL STN KATIHAR

Amount

Taking down Chowkhats or frames not exc 1.5 sqm each with shutters ( without taking off shutters from the frame) incl dismantling of PCC bed blocks for hold fasts, complete all as specifed and as directed.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specifed and as directed.

Taking down shutter and refixing in same opening exc 1 sqm and n exc 2 sqm each, complete all as specifed and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specifed and as directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification, complete all as specifed and as directed.

M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in steel frame,gaps in between glazed &flyproof steel window, cills, railling up to 60mm in height etc including necessary form work as required all complete as specifed and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F of 2nd class HW rail and style factory made plain framed pannelled door shutters 35mm thick (two layer panel) with lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces. The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated all as specified and as directed.

M&L 35mm thick 2nd class hard wood glazed and skeleton shutter factory made open revated and prepared to receive glass, guage etc with plain chamfered or rounder mitred and rebated, sash bars in any numers divided into squares edges of framing, plain or chamfered or rounded complete all as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wood and wood based surface, over 10cm width or girth complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays & construction joints to be given at every 3m interval and corners of buildings and filled with bituminous mastic or equivalent filler complete all as specifed and as directed.

M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth, complete all as specifed and as directed.

Taking up or down GI Tubing 15mm bore pipe and connection including cleaning for refixing or removal from site, complete all as specifed and as directed.

Taking up or down GI Tubing 25mm bore pipe and connection including cleaning for refixing or removal from site as directed.

S&F 15 mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe, complete all as specifed and as directed.

S&F 25 mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe, , complete all as specifed and as directed.

S&F in repair 100mm bore SWG drain pipes aid in trenches and jointed as specially complete all as specified and as directed by Engr-in-charge.

Demolition and breaking up 100 mm drain pipes (salt glazed ware , Acor reinforced concrete) set in cement mortar, complete all as specified and as directed by Engr-in-charge

S&F PVC 110mm(SWR) dia bends any radius in repairs as specified and directed by Engr-in-charge

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples all as directed.

S&F Sheet glass, ordinary quality and glazing with oil putty in square any size in aluminium joinery in each pane ,4.0 mm thick glass complete all as specified and as directed.

S&F 4.00mm thick figured sheet glass, ordinary quality fixed with aluminium frame works n. exc 0.5 sqm in each pane, complete all as specifed and as directed.

S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium ally fixed, complete all as specifed and as directed.

S &F 125 mm size Butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specifed and as directed.

S&F 150 mm Aluminium handles, cast type, anodised, complete all as specifed and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section and fixed 150 mm size, complete all as specifed and as directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorand fixed with screw complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles from site, complete all as specifed and as directed.

M & L for non skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed for laying floor finishes in CM (1:6) complete all as specified and as directed

M&L Coloured glazed ceramic tiles 300 x 450 x 7 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 cm thick backing with cm 1:4, complete all as specifed and as directed. .

M&L for Vitrified Ceramic light shade coloured tiles 10mm thick (square/rectangular ) polished, area of each tiles n exc. 36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or colour to match incl 15 mm screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed.

M&L for Vitrified Ceramic light shade coloured tiles 10mm thick (square/rectangular ) polished, area of each tiles n exc. 36 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or colour to match incl 10 mm screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed and as directed.

M&L Rendering 15 mm thick on other than fair faces of brick work or concrete sur-faces in cement mortar 1:6 for finished even and smooth (without using extra lime or cement, complete all as specifed and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound @ 3% by wt of cement for finished even and fair (WPC will be measured and paid separately), complete all as specifed and as directed.

Supply only liquid water proofing compound, complete all as specifed and as directed.

M&L preparation of new plastered surfaces of wall and appying two coats of oil bound distemper over 1 mm thick wall care putty all as specified and as directed.

M&L for prepration of newly plastered surface and appplying two coats of Acrylic Smooth exterior paint of required shade over 1mm thick wall care putty etc complete all as specified and directed

M&L for Two coats of Acrylic Smooth exterior paint of required shade over including complete removal of existing treatment on old surfaces of walls/chajja/parapets, complete all as specified and directed

Material and labour for preparation of old surfaces of walls and applying one coat of oil bound distemper, complete all as specified and directed

Applying 1 mm thick wall care putty on wall surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD as directed) complete removal of existing treatment on wall and preparation of surfaces, of any description, complete all as specifed and as directed.

S&F in repairs Stop valves 15mm dia, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, but fancy type, chromium plated with long shank and cup (concealed type), complete all as specifed and as directed.

S & F in repairs 15 mm bore bib taps fancy type cast copper alloy cromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specifed and as directed.

S&F of angle stop valves 15mm dia, cast chromium plated, screwed down, high pressure, screwed both ends for iron pipe and fixed, chromium plated with long shank and cup, complete all as specifed and as directed.

S&F in repairs of pillars taps fancy type, cast copper alloy with capston heads, chromium plated screwed down high pressure, screwed for iron pipe 15mm bore, complete all as specifed and as directed.

S&F in repair water closet (Squatting pattern) of vitreous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) incl connectio to trap and flushing pipe etc complete incl trap set in and incl concrete complete all as specified and as directed.

S&F in repair vitreous china wash down water closet (pedestal pattern),white (excluding fixing bolts flushing cistern and flush pipe) incl PVC seat cover complete all as specified and as directed.

Supply and fixing PVC valve less syphonic action type flushing cistern low level, white with PVC in let ball valve, float and handle incl brackets , 10 ltrs capacity and connection to pipes set with concrete and making good to floor, fixed as in repair complete all as specified & directed.

S&F in repairs brass chromium plated shower rose 125mm size any colour for fixing with 15mm pipe, complete all as specifed and as directed.

S&F PVC connection 15mm size with PTMT nuts, 450mm length, complete all as specifed and as directed.

S&F in repair towel rail 600mm, 20mm dia, D type of brass chromium plated fixed with and including CP brass screws, complete all as specifed and as directed.

Supply and fixing 100mm dia chromium plated grating with waste hole, fixed as in repairs complete all as specified and directed.

Supply and fixing 100mm dia chromium plated grating , fixed as in repairs complete all as specified and directed.

Supply and fixing PVC waste pipe suitable for 32mm dia bore waste coupling fixed as in repairs, complete all as specified and directed.

M&L in repairs for PVC (SWR) floor trap 75 mm,plain with grating incl jointing with solvent cement, complete all as specifed and as directed.

S&F of 1000 litre capacity rotational moulded polyethylene water storage tank (Cylinderical vertical with close top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling old one and provn of all necessary fittings complete, all as specifed and as directed.

Demolition of brickwork built in cement mortor including all quoins arches, pillars etc complete & removal , complete all as specifed and as directed.

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 incl demolition of old bricks, complete all as specifed and as directed.

S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats Minimum weight 300gms), complete all as specified and directed.

Supply & fix as in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

Dismantling ceiling boards, any thickness including cover fillets old frame work any type complete all as specified and directed

S&F Gl frame work (Size of grid 605 x 605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and as directed.

M&L for gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers, complete all as specifed and as directed.

M&L 18 mm thick PVC sheet plelaminated economic/economic colour both side , cut according to the size of the cabinet or for kitchen drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leaf shutter including fixing with 1.25" Mild steel screw to the frame with the channel , complete the work according directions of Engineer-in-Charge, Including dismantling of any type of Board complete all as specified and directed. (Make - Rahjshri / Kumar archtech

M&L 9 mm thick PVC sheet plelaminated economic/economic colour both side , cut according to the size of the cabinet or for kitchen drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leaf shutter including fixing with 1.25" Mild steel screw to the frame with the channel , complete the work according directions of Engineer-in-Charge, Including dismantling of any type of Board complete all as specified and directed. (Make - Rahjshri / Kumar archtech )

S&F sainless steel handles 100 mm fixed with screw complerte all as specified and as directed

Auto close stainless steel (clip hinges) 75mm size suitable for cupboard shutter fixed in position with stainless steel screws, fixed as in repairs complete all as specified & directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete fittings such as switches and fixtures ceiling roses, pendants, regulators, sockets, lamp holders, bracket light fittings, bulk heads fittings, tube light fittings etc removing the materials from site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

S&F point wiring for one light/fan/bell /5amp socket outlet same board/5amp socket outlet independant board point, controlled by one, one way switch with 1.5 sqmm size, PVC insulated and unsheathed 1100 volts grade, single core stranded (multistrand) copper conductor (FRLS) cable drawn into & including midium grade PVC conduit (not less than 20mm outer dia) with all fittings and accessories fixed concealed (including chase cutting in brick/stone masonry walls for fixing conduit and plastering the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3mm thick plastic laminated sheet covers/ modular plate fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 sqmm solid copper conductor cable earth wire and connected to earth dolly complete all as specified and directed, are as follows :-

(a) One light /one fan/one bell point controlled by one switch.

(b) One socket outlet 5 pin 5 amps controlled by one switch on same board.

(c) One socket outlet 5 pins 5 amps controlled by one switch on independent board.

All as per item No 2 herein before but wiring with 2.5 sqmm copper wire (FRLS) and 2.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

S&F modular switch single pole, one way 6 amps complete all as specified and directed. Make - Legrand,roma,havells.

S&F modular socket outlet multi 5 pins 6 amp, complete all as specified and directed. Make - Legrand,roma,havells.

S&F modular switch single pole, one way 16 amps complete all as specified and directed.Make - Legrand,roma,havells.

S&F modular socket outlet 2 in 1, 6 pins 16 amp, complete all as specified and directed. Make - Legrand,roma,havells.

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. Make - Legrand,roma,havells.

S&F modular step fan regulator, 120 watt, 2 module AC, 230V, 50Hz complete all as specified and directed. Make - Legrand,roma,havells.

S&F call bell multi musical type, AC, 230V single pole fixed over with and including sunk spressed steel box of size 175mm x 100mm with 3mm thick plastic laminated backalite shut cover fixed with brass screw complete all as specified and directed. Make - Make - Legrand,roma,havells.

S&F modular bell push, single pole 6 amps complete all as specified and directed. Make - Legrand,roma,havells.

S&F modular white cover plate with frame 3 module, complete all as specified and directed. Make - Legrand,roma,havells.

S&F modular white cover plate with frame 8 module, complete all as specified and directed. Make - Legrand,roma,havells.

S&F modular metal flush box 3 module, complete all as specified and directed. Make - Legrand,roma,havells.

S&F modular metal flush box 8 module, complete all as specified and directed. Make - Legrand,roma,havells.

Supply and fix wall/ceiling mounting LED light fitting 1x20W, 230V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete of Havells make or equivalent in BAJAJ/HPL, complete all as specified and directed.

Supply and fixing LED light fittig mirror type with hih out put diffuser 2 feet, 10 watt 230V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete of Havells make or equivalent in BAJAJ/HPL, complete all as specified and directed.

Supply and fixing LED bldg security light fitting 25 watt 230V, AC outdoor type with high pressure die cast aluminium hosing and head resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete of make /HPL/Bajaj/Havells, complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F sheet metal enclosure for DBs (double door type) when MCBs - SPN/SP to be used Single pole and neutral 12 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Havells/Legrand or equivalent with IP 65/66 protection.

S&F sheet metal enclosure for DBs (double door type) when MCBs - SPN/SP to be used Single pole and neutral 4 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Havells/Legrand or equivalent with IP 65/66 protection.

Supply and fixing in repair MCB 06 - 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in repair MCB 6 to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.

Taking down the ceiling fan & exhaust fan,painting, servicing/ greasing, oiling the fans including rewinding the us fans, after complete the spl repair bldg wk re-fixing the fans including plywood wk windows for fixing the exhaust fans, all as specified and directed by the Engineer-in-charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 Volt, complete, fixed in repairs. Make : Legrand / Havells / ABB, complete all as specified and directed.

Taking down the geyser, servicing, including changing u/s parts like thermostat/heating element ets , after complete the spl repair bldg wk re-fixing including painting and connecting pipe all as specified and directed by the Engineer-in-charge.

M/S ANUJ KUMAR (BID ID -3349916)

RAJEEV KUMAR (BID ID -3357969)