SPL REPAIR TO BLDG NO P-247 (JCOs LIVING LINE) UNDER GE DEHRADUN

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6 surface finished even and smooth complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 with WPC @ 3% by weight of cement surface finished even and smooth complete all as specified and directed. Note : WPC will be paid separately

Supply only water proofing compound complete all as specified and directed.

Material and labour for 10 mm thick rendering on celing surface in cement mortar 1:3 mixed surface finished even and smooth complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of OBD over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed.

Material and labour for preparation of newly plastered surface on ceilings and applying two coats of distemper oil emulsion on ceiling, off sets, pillar etc. over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed.

Material and labour for complete removal of existing treatment of walls including corners and applying two coats of distemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed.

Material and labour for preparation of old plastered surface of ceiling and applying one coat of OBD on ceiling, off sets, pillar etc. complete all as specified and directed.

Material and labour for Vitrified Ceramic tiles light shade 7-8 mm thick (square/rectangular) polished area of each tiles not exceeding 0.72 sqm in floor etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified and directed.

Description all as per item No 13 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4 complete all as directed and specified.

Material and labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for non skid/mat finish ceramic coloured tiles of size 400 mm x 400 mm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame) and removing from the site complete all as specified and directed.

Description all as per ser Item No 17 above but n.exc 1.5 sqm each complete all as specified and directed.

Supply and fixing factory made 100 % solid wood plastic composite (WPC) door frame 125x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed by Engr-in-Charge.

Supply and fixing factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed by Engr-in-Charge.

Supply and fixing 30 mm thick WPC factory made 100% solid designer flush door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed by Engr-in-Charge.

Supply and fixing 30 mm thick WPC factory made Glazed and skeleton shutter (conforming as per IS-4020) made from 100% lead free single extruded open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed by Engr-in-Charge.

Supply and fixing for stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with nails complete all as specified and directed.

Supply and fixing for stainless steel Butt Hinges medium weight 100 mm fixed with stainless steel screws complete all as specified and directed.

Supply and fixing for stainless steel tower bolts 150 mm size fixed with stainless steel screws complete all as specified and directed.

Supply and fixing for 150 mm size stainless steel handles fixed with stainless steel screws complete all as specified and directed by Engr-in-Charge.

Supply and fixing for stainless steel sliding door bolts of length 250 mm size and fixed with stainless steel screws complete all as specified and directed.

Supply and fixing floor door stopper of stainless steel double legged and tongue, 304 grade, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

Supply and fixing aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.

Supply and fixing aluminium capsule door closer suitable for door shutters of 851 to 1000 mm wide complete all as specified and directed.

Supply and fixing for powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos stainless steel wire gauged shutter sliding type, 3 track numbers for sliding windows, and glazed with glass 4mm thick & including glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking system and provision of space for AC etc complete all as specified and directed by Engr-in-charge. Size of Track-Both Top & Bottom (Verticles sides):- 100 x 44 x 1 mm Size of Shutter Frame:- 25 x 12 x 1 mm Note: Iron grill with frame to be fixed with window (measured and paid separately)

Supply and fixing for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed. Note: Iron grill with frame to be fixed with window (measured and paid separately)

Supply and fixing in repair 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing in repair 18 mm thick PVC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repair 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, solvent cement/ adhesive complete all as per specifications & directed by Engr-in-Charge.

Supply and fixing Continuous (PIANO) hinges, stainless steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed.

Supply and fixing magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

Supply & fixing in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed.

Supply and fixing for medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing including dismantling of old tubing complete all as specified and directed.

Supply and fixing for medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing including dismantling of old tubing complete all as specified and directed.

Material and labour for cutting chases, pinning in brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good cutting not exc 10cm girth complete all as specified and directed.

Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat cover, closed pattern with flat bottom, cover and mild steel chormium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing in repair 10 ltr capacity PVC low level flushing cistern valveless, syphonic action type, white, with inlet, ball valve, float and handle including brackets and fixed complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin with pedestal including brackets, white size 550 x 400 mm including cutting for and pinning in ends of brackets, including Waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.

Supply and fixing in repair wall mixer/L bend mixer 15 mm dia, Brass Chromium plated complete all as specified and directed.

Supply and fixing in repair centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified and directed.

Supply and fixing in repair long body bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete all as specified and directed.

Supply and fixing in repair 15 mm dia angle cock/ angle valve/ stop valves chromium plated with capstain head screwed down high pressure complete all as specified and directed.

Supply and fixing in repair CP brass shower rose 15mm dia and 100mm dia complete all as specified and directed.

Supply and fixing in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed.

Supply and fixing in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair CP Soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fixing in repair CP health faucet suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fixing in repair waste coupling 32mm dia PTMT half or full threaded complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair stainless steel wave shower drain channel complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair stainless steel floor Grating with hinge round 100mm dia all complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair 32mm bore heavy duty waste pipe not less than 60cm long for kitchen sink, WHB etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair glass corner shelf suitable size made of 5 mm thick toughened glass with CP railing complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair front glass shelf assembly consisting of 5 mm thick toughened glass with CP railing and brass brackets complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair stainless steel peg set of five with chromium plated back plate 304 grade, 40mm wide fixed with stainless steel screw complete all as specified and directed.

Taking down CI/AC/PVC pipes incl fittings upto 110mm dia and removing from site complete all as specified and directed.

Supply and fixing PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls or laid in trenches or floors complete all as specified and directed.

Supply and fixing PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls or laid in trenches or floors complete all as specified and directed.

Supply and fixing PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.

Supply and fixing PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed.

Supply and fixing PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed.

Supply and fixing PVC nahani trap of 75mm bore, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement including demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete all as specified and directed.

Material and labour for heavy duty anti skid ceramic coloured tiles 9-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm as in stairs, floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

Supply and fixing for rotational moulded polyethylene 1000 Ltrs Capacity white water storage tanks of weight not less than 33 kg (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 15 mm dia including dismantling of old tank complete all as specified and directed.

Supply and fixing in repair Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.

Taking out & removing existing roof treatment of any description completely upto mother roof slab including racking out joints, hacking for key,sweeping clean and scrubbing down with water etc to remove dust etc,complete all as specified.

Material & labour for surface preparation of roof and treating of joints, filling of honey combs and providing 25 mm thick PCC (1:2:4) type B-0 with WPC over roof surface complete all as specified and directed.

Dismantling of timber scantlings 40 sq cm and over in section in any position in unframed work complete all as specified and directed.

Supply and fixing for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and directed.

Supply and fixing for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W (Gde E-250) quality-A complete all as specified and directed by Engr-in-Charge.

Supply and fixing for Framed work such as grills, gratings, etc. or hand rails with ends of bars (angle, hollow section) shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Supply and fixing for prepainted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Demolition of Cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for cement concrete (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring, foundations, filling and mass concrete complete all as specified and directed.

Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engr-in-Charge.

Material and labour for Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed.

One light point controlled by one, one way 6 Amp switchs

One fan/exhaust fan point controlled by one, one way 6 Amp switchs

One 5 pin 5/6 Amps socket outlet point on the independent board with other switchs.

One 5 pin 5/6 Amps socket outlet point on same board controlled by one, one way switchs.

Description all as per item No 1 here in before but point wiring with 4 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4sqmm PVC insulated multi strand copper conductor cable as continous earth wire.

S & F in replacement switch piano, flush type, single pole one way 6 Amp .

S & F in replacement switch piano, flush type, single pole one way 16Amp .

S & F in replacement socket outlet, multipurpose, 2 in 1 5 pin, 6 Amp.

S&F in replacement socket outlet, multipurpose, 2 in 1 5 pin, 16 Amp with fuse and neon indicator .

S & F in replacement ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body .

2 x 6 Sqmm + 1 x 6 sqmm

2 x 4Sqmm + 1 x 4 sqmm

2x 1.5 Sqmm + 1x1.5 Sqmm

S & F in replacement MCB SP 240 volts 'B' Curve 10 KA . including connection with suitable size copper lugs of following capacity

MCB SP 6 to 32 Amp.240 volts

MCB SPN 40 to 63 Amps 240 volts

S & F in replacement Distribution box MCB Protected socket with Plastic enclosure (Surface mounitng ) 20 AMP MCB Combo box DP including plug top complete all as specified and directed

S & F in replacement MCB DB, sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection of following size:-

8 way SPN DB.

S & F in replacement Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings .

Supply and fix in replacement Exhaust fan 300 mm sweep,not more than 900 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

Supply and Fixing in replacement high prssure die cast alluminium LED Batten light fitting 20W ,125 lumens /watt,IP-20,colour temp not less than 6500,inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing of Geyser 3 level safety, capillary thermostate , adjustable , automatic thermal cutout and multifunctional wall to provide higher safety, ISI marked nickle coated heating element of recommended capacity not less than 2KW to provide resistance against scale formation and EPAC coated inner tank having minimum 8 Kg/cm2 pressure bearing capacity , vertical mount type 25 Ltrs capacity five star rated , shockproof and rust proof ABS body compact size including two nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall including S&F of 15mm bore NRV on GI pipe connetion complete all as specified & directed.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F BLDC Ceiling Fan complete with electronic type regulator and remote accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of , complete connecting up ceiling rose to connector block of fan including fabricating and fixing of Fan hooks from ceiling truss/angle iron, required length of down rods (Aas per site requirement) and necessary nuts and bolts complete all as specified and directed.

M/S ROORKEE ENGINEERING (BID ID -3405970)

Shri Radhey Associates (BID ID -3405860)

M/S GIRI CONSTRUCTION CO. (BID ID -3404604)

M/s Pradeep Kumar (BID ID -3404436)

Pragati Enterprises (BID ID -3405884)

M/s Anil Kumar (BID ID -3405604)