Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.9 LAccepted-AOC GANDHI CHOWK LANSDOWNE DISTT PAURI GARHWAL 246155 | LANSDOWNE | PAURI GARHWAL | UTTARAKHAND | 246155 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹14.3 L+₹98,636.50 (7.39%)Rejected-AOC | L2 | Rejected-AOC Not Lowest Bidder | |
| 3 | L3₹14.5 L+₹1.1 L (8.24%)Rejected-AOC 199 79 SADAR BAZAR LANSDOWNE TAHSIL LANSDOWNE | L3 | Rejected-AOC Not Lowest Bidder | |
| 4 | L4₹14.6 L+₹1.3 L (9.46%)Rejected-AOC GANDHI CHOWK LANSDOWNE 246155 | PAURI GARHWAL | UTTARAKHAND | 246155 | L4 | Rejected-AOC Not Lowest Bidder |
Tender Value
₹19.7 L
EMD Value
₹39,400
Closing Date
30 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(Hills) Dehradun
HQ CWE(Hills) Mall Road Dehradun Cantt-248003
SPL REPAIR TO GOVT MD ACCN BLDG No T18 AND T-20 AT RECORDS THE GARH RIF AT LANSDOWNE
2024_MES_643103_1
87190/LDN/E8
Open Tender
Civil Works
Item Rate
150 days
AGE(I) Lansdowne
Class E Cat a(i)
6 documents required · 6 mandatory
₹500
Yes
AGE(I) Lansdown
₹39,400
Yes
18 Jul 2024
19 Feb 2024
8 Apr 2024
19 Feb 2024
30 Mar 2024
12 Mar 2024
Amount
Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level ) complete all as directed.
M&L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in CM(1:4) complete all as specified.
M&L Plain Cement concrete (1:4:8), Type D-2, (using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M & L for providing 100 mm thick cement concrete (1:2:4), type B-2 (using 40 mm grade stone aggregate) as insub base for laying floor finishes, complete all as specified and directed.
PCC (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in coping and the like including weathering slightly rounded/chamferred angle with and including necessary use and waste of form work for fair faces of concrete complete all as specified and directed
M & L for providing 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection surface finished even & smooth without using extra cement with and including joint filling(Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interval and corner complete all as specified. and directed, Note: Joint to be provided at each interval of 3m and corner and cost of the same deemed in quoted rate.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified.
M& L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar ( 1:4) complete all as specified.
M& L for Glazed coloured ceramic tile 300 x 450 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar (1:4) complete all as specified.
M&L for joint less non skid coloured ceramic tiles of 7 to 8 mm thick, (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified & directed.
Description same all as per item 11 above but as in skirting/vertical surface including 10 mm thick plastering cement sand motor (1:4) etc complete all as specified and as directed.
M&L for Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement pigments including 20 mm thick screed bed cement sand mortar (1:6) complete all specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as specified.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.
S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based plain steel sheet 0.50mm thick (ISI Marked) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, valey gutter fixed with self tapping screws complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.5 Sqm each
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4 sqm each
S&F windows & ventilators fabricated from Rolled Formed GI Section made of Galvanised steel colour coated(PPGI Sheets) (Base steel as per IS 513 ‘’D’’ quality. Galvanised as per IS 277 with Zinc of 90 Gsm/SqMt w. PAINT: Pre-Painted sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick.GI Section of 0.58mm thick in Double rebate windows in which both glazed shutter and flymesh shutter, 74 X 60mm outer frame , Mullion 72 x 49mm, Glazed shutter 48 x 22mm, Flymesh 41 x 22mm, Beading with round ends for Glass Fixing 12 x 12mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner PolyVinylChloride brackets centre mullion fixed with PolyVinylChloride Mullion caps . Glass of 4mm thick plain float glass fitted with Ethylene Propylene Diamine Monomer in glazed shutter and wiremesh of Stainless steel of 36 guage to fix mesh in mesh shutter using VC Black Gypsum Drywall screws and Spoon profile of 0.58mm GI Sheet. Corners of the windows should be joined with corner brackets made of polyvinylchloride with crca of zinc phosphate coat.Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each, PolyVinylChloride handle 1 in each and Powder coated Peg stay in Glass shutter.Window shall be provided with Powder coated MS Grill/Guard Bars made of 10mm MS Sq Bar welded to 6 x 12mm MS Flat with countersunk holes at both vertical ends . Gap between the bars should not be more than 150mm . Window frames shall be fixed to brick / concrete masonry by using nylon self expension caps & 75/100 mm MS screws after drilling in walls. VC Black Gypsum Drywall screws should be used while fixng corner brackets,stay,hinges,mullion caps of windows. .complete all as specified and directed.
S & F 100mm x 65 mm single rebate factory made 100 % solid WPC door frame made from 100 % lead free( single extruted process) material with density 780 kg/cbm and manufactured by an ISO 9001-2016 certified compony all as per spesification.The door from should be water proof, termite proof,fire resistant and having exellent screw holding capacity.all as specified.
S & F 125 mm x 65 mm double rebate factory made 100 % solid WPC door frame made from 100 % lead free( single extruted process) material with density 780 kg/cbm and manufactured by an ISO 9001-2016 certified compony all as per spesification.The door from should be water proof, termite proof,fire resistant and having exellent screw holding capacity.all as specified.
M&L for 30mm thick factory made solid WPC (wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texteure, including stainless steel wire mesh shall be fixed with 15 x15 mm square tube in side rails with screwing 8 x 28 heat metal zink coated screw can be remove or fix again after changing of wire mesh, when needed. The density of the shall be as per manufacture instruction compete all as specified and directed.
S & F 30mm thick factory made modular single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistur proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) all as specified.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or wire staples complete all as specified and as directed.
M&L for Painting to new surfaces of wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with one coat of pink primer and applying two coats synthetic enamel paint complete all as specified and directed.
M&L for Painting to old painted surfaces of wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as directed.
M&L for Rendering 10 mm thick CM (1:6) on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.
M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM (1:6) and 5mm thick in CM (1:4) using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed. Note :- Water proofing liquid compound shall be measured and paid separately.
Supply only liquid water proofing compound.
M&L for preparation of newly plastered surface of internal wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The new surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper The cost of all material T&P and labour required for preparation of surface are deemed to be included in the rates quoted . (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)
M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge . Note: (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor
M&L for preparation of old decorated surface of external wall by removing existing treatment with mechanised sander (rpm 1500-2700) along with internal dust extractor system for clean environment certified by reputed paint manufacturer, then washing the surface with bleaching powder solution for treatment of fungal growth all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.
M&L for Pre cast RCC ( 1:2:4), Type B1 (using 20 mm graded crushed stone aggregate) as in man hole cover and similar work including necessary form work except slab and set in CM (1:4) complete all as specified and directed.
M&L for mild steel TMT bars as in reinforcement, 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per above item here-in-before but 5 to 10 mm dia bar as in stirrups,ties .
S&F PVC ( SWR ) junction single,(single T) equal or unequal 75mm bore with access door.
S&F PVC ( SWR ) vent cowl 75mm bore.
S&F PVC ( SWR ) waste pipe pipe of 75 mm dia bore in any length ,single socketed with rubber ring joints fixed to walls with necessary MS fixtures all as directed
S&F grating doom 125mm dia of PTMT (with waste hole or without waste hole)(Min wt 40gms) complete all as specified and directed.
S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified.
All as per above item here-in-before but 75 mm long complete all as specified.
S&F 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.
S&F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.
S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified.
S&F Aluminium handles cast type anodised of size 125 mm long ISI marked complete all as specified.
S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified.
Dismantling of water tanks exc 250 ltr capacity but n exc 500 ltr and removing to store all as directed.
S&F Rotational moulded polyethylene water storage tank including, plastic lid cover, triple layered,white colour, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltrs including making connections,20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt210 gram) complete all as specified in SSR Part I.
S&F Stop valve 20mm dia bore,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions all as specified and directed.
S&F in repairs vitreous china squatting pan 'orissa pattern 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flushing pipe but incl supply and fixing of 'P' or 'S' trap etc complete) complete all as specified and directed.
S&F Cast Iron Nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) complete all as specified and directed.
S&F in repair for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed
S&F in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 60/90 cm long complete all as specified.
S&F Vitreous china wash hand basin in repair ,white ,flat back of size 550x400mm with PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends,pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length , waste coupling 32 mm dia of PTMT half or full threaded Min wt 45 gram complete all as specified and as directed.
Supply only flush pipe of polythene of low or high density 32mm PVC for low level flushing cistern complete all as specified.
Supply only low density PVC pipe 32/40 mm dia as in waste pipe to sink complete all as specified and directed
S&F CP Brass Tubular towel rail 20mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed.
S&F in repairs PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified.
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves,lintels etc; and cutting chases for concealed water tubing and making good, cutting not exc. 10cm girth all as directed.
Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete, bore of pipe 15mm all as specified.
Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete , bore of pipe 20mm. all as specified.
S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, all as specified.
S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore of 20mm dia all as specified.
S & F in repair brass chromium plated Mixer for mixing hot & cold water,screwed down high pressure with long screwed shanks and fly nuts,screwed for iron pipes 15 mm dia bore all as specified.
S&F in repairs Pillar tap 15 mm dia fancy type, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F 15mm Bib tap fancy type cast copper chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule all as specified.
S& F in repair Brass chromium plated shower rose 125mm size fancy type, with CP neck 9 inch long with swivel joints, incl fixing to steel pipe or union of 15 mm bore all as spfd.
S&F in repair Stop Angle valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed ,complete all as specified.
S & F for Soap dish, Stainless steel, approximate size 160x 160x90mm complete all as specified and directed .
S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repair complete all as specified and directed..
S&F in repair decorative type powder coated steel drapery rod 25mm dia as per approved design all as specified,
S&F in repair decorative type powder coated brackets suitable to drapery rod as per approved design all as specified
M&L for pre- polished granite slab machine cut of any shade as approved by GE of 18 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones complete all as 'specified and as directed.
S&F in repair stainless steel kitchen plate rack 0.80mm thick sheet of over all size 24" x 36" x 10" fixed with steel screws and steel rawal plugs complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over unframed work in section, in any position.
M&L for 2nd class softwood in timber scantling for wall panelling, ceiling, roof truss,post, purlins, rafters and similar work (Clean sawn Timber framed and fixed type) including necessary coating framed joints with glue complete all as specified.
Dismantaling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
M&L for providing E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and painted with two coats of oil bound distemper incl making good all the disturbed portion complete all as spd & directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
M&L for 2nd class soft wood boarding 20 mm thick planed one side and edges tounged & grooved or rebeted fixed to timber frame work with nails complete all as specified and directed. .
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and fixing new ones complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 3 mm thick figured glass, pin headed type and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed.
S&F in repair 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified.
Demolition and breaking up drain pipe (SGSW )) of 150 mm nominal bore laid in trenches, set & jointed in cement morter, incl necessary earth work, all as specified and directed.
M&L for 150 mm Salt-glazed stone ware(SGSW) drain pipes laid in trenches and jointed complete as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as directed.
M & L framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing only
Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc. all as specified and directed.
M&L for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with continious earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed PVC conduit, "medium grade" (ISI marked) , not less than 20 mm dia duly concealed on wall/ceiling or above false ceiling with fittings medium grade (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover plate complete all as specified and directed. Note:- (i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface shall deemed to be included in quoted rates. ii) If the contractor fail to make good the disturbed surface of wall/ceiling etc and do not match with the existing surface of wall/ceiling to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding.
Description same all as per iten No 95 here-in-before but One 3 pin/5 pin 5/6 Amps socket outlet on same board with other switches, with cables 1.5 Sqmm size, complete all as specified and directed.
Description same all as per item No 95 here-in-before but for One 3pin/5pin 5/6 Amps socket out let on independent board with other switches, with cables 1.5 sq mm size, complete all as specified and directed.
Description same all as per item No 95 here-in-before but with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power point complete all as specified & directed.
S&F switch Modular single pole, one way 6 Amps , 1 module, 230 volts, 50 hz complete all as specified and directed.
S&F switch modular , one-way 16Amps, 1 module 240 Volts AC complete all as specified and directed.
S&F Modular Socket outlet, 6A - 2/3 pin combined, 2 module ISI marked, 230 volts, 50 hz complete all as specified and directed.
S&F modular socket, 6A/16A -2/3 pin combined 2 module 230 volts, 50 hz complete all as specified and directed.
S&F Fancy angle holder Metal ring insulated body with back plate, suitable for batten fittings ISI Marked complete all as specified & directed.
S&F ceiling rose surface bakelite 65/25 mm dia having three terminals ISI Marked complete all as specified & directed.
S&F sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 8 way with 200 Amps rated bus bar complete all as specified and directed .
S&F bell push piano flush single pole one way 5/6 Amp all as specified and directed.
S&F bell ding dong elelctric 230V AC single pole all as speccified and directed.
Supply and fixing MCB SP 6- 32 Amp 240 V AC 10 KA B curve rupturing capacity complete all as specified & directed.
Supply & fixing MCB, SPN, AC, 240 volts of 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.
S&F surface mounted LED luminiare, 20 watt with all accessories having aluminum extruded channel with diffuser for glare free light, high lumen output, driver PF >0.95 having over voltage protection upto 400 volts surge protection, level 7-10 KV thermal short circuit protection THD<10%, made up of long life LED chips (SMD) in modular with Ra>70 and lumen efficiency >120 lumen per watt, internally pre-wired through flexible wire connecting with ceiling rose all as directed.
S&F LED Bulb 10 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for "B-22 type to fix on batten holder comlpete all as specified & directed
S&F Exhaust fan made of steel body with louvers shutter,AC single phase 230/240 Volt ,50HZ,RPM 1200, Copper windingof 300mm sweep complete including making hole and making good the disturbed sufaces of wall all as specified and directed by Engr-in-charge .
Supply and fix Water heater storage type water heater (Geyser) capacity 25 litres.BEE 5 star rated including grouting the nut bolts - 04 Nos,PVC Connection Pipe - 02 Nos and necesssary GI pipe etc all as specified and directed .
S&F new LED building security light 1 x 20 W housing made out of pressure die-cast aluminium alloy with toughned glass, IP 66 protection working on 240 volts, 50 Hz, consisting of reflecting lamps wired with appropriate driver PF> 0.95 having overvoltage protection upto 440 volt, surge protection level > 10 KV, thermal short circuit prtection THD< 10% made up of long life LED chip (SMD) in modular with Ra< 70, and LED lumen efficiency > 140 lumen per watt, beam angle along the drive way, 120 degree, beam angle across the drive way, LED should be of more than 01 watt CCT should be between 5700° K- 6500 K including fixing on existing bracket including connecting with 1.5 sqmm , 3 core, PVC insulated copper onductor cable 1100 Volt grade from distribution box to light complete all as specified and as directed.
S&F sub main wiring with two single core PVC insulated,unsheathed, stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, stranded copper conductor cable as earth wire in and including rigid PVC conduit 25mm dia or higher, medium grade ISI marked and earth wire connected to common earth dolly all as specified & directed. Note: Two run of 4sqmm cable, one run of 4sqmm cable and one run of PVC conduit shall be measured as one unit
S&F service cable 1100 Volts grade heavy duty cable PVC insulated solid aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended with insulating hanger not more than 1 mtr apart including 4 mm dia suspension wire alongwith 16 Sqmm twin core flat cable all as specified and directed.
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 4 mm GI wire as earth lead by means of brass nuts and bolt, thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size PCC 1:2:4 Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighing not less than 4kg/sqm in lieu of CI cover. (ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items.
PRAMOD KUMAR
M/S Balaji Builders
Panwar Electrical
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .