Kerala

Active

Works

Repair and Maintenance Works

EZHOME GP Pro.No 55-2026-27-MAINTENENCE TO KANNOM CHALAYI CULTURAL CENTER

Local Self Government Department

O/O ASSISTANT ENGINEER EZHOME GP | Kannur, Kerala

Amount: ₹4.2 LCloses: 22 Oct 20263d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published14 Oct 2026
Closes22 Oct 2026
Bid Opening24 Oct 2026

Tender Value

₹4.2 L

EMD Value

₹10,591

Closing Date

22 Oct 2026, 6:00 pm3d left

Tender Inviting Organisation

Name

ASSISTANT ENGINEER

Address

O/O ASSISTANT ENGINEER EZHOME GP

Work Description

EZHOME GP Pro.No 55-2026-27-MAINTENENCE TO KANNOM CHALAYI CULTURAL CENTER

Tender Information

Tender ID

2026_LSGD_878610_10

Reference Number

ET09/2026/AE/LID EW/EZM

Tender Type

Open Tender

Product Category

Repair and Maintenance Works

Form of Contract

Percentage

Location

O/O ASSISTANT ENGINEER EZHOME GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredEPAY DETAILS (.pdf)

RequiredIPACT (.pdf)

RequiredPRELIMINARY AGREEMENT (.pdf)

RequiredCONTRACTORS LICENCE, GST, PAN COPY (.pdf)

RequiredFORM OF TENDER (.pdf)

RequiredAFFIDAVIT (.pdf)

Fee & Financial Details

Tender Fee Amount

₹935

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹10,591

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

14 Oct 2026

Published

14 Oct 2026

Bid Opening

24 Oct 2026

Download Starts

14 Oct 2026

Download Ends

22 Oct 2026

Submission Starts

14 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (10 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1BUILDING MAINTENANCE
1.001	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.96	cum	335.74	₹322.31
1.002	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	1,464.16	kg	174.58	₹2,55,613.23
1.003	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	134.23	sqm	153.87	₹20,653.66
1.004	OD96356/2026-2027:Providing and fixing Alu-Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40mm (+0.05%) thickness. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm)with EPDM seal, complete up to any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins, rafter sand trusses and including cutting to size and shape wherever required. (MOD 12.50 of DSR ) (As per EE Circular No. D3 dtd 02/07/21)	79.56	sqm	538.49	₹42,842.26
1.005	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	10.05	metre	527.38	₹5,300.17
1.006	OD96493/2026-2027:Providing and fixing 150mm UPVC Square gutter pipe over GI clamp of same profile at 1m C/C	20.1	metre	327.02	₹6,573.1
1.007	50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall	20	metre	401.21	₹8,024.2
1.008	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	8.64	cum	8,620.24	₹74,487.49
1.009	5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	18.68	sqm	360.41	₹6,730.66

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.28 MB

Tendernotice_2.pdf

PDF • 0.19 MB

Tendernotice_3.pdf

PDF • 0.03 MB

Work Item Documents

BOQ_1494880.xls

BOQ • 0.31 MB

AFFIDAVIT.pdf

Tender Documents • 0.23 MB

preliminaryagreement.pdf

Tender Documents • 0.11 MB

SBD.pdf

Tender Documents • 2.04 MB

viewnit.pdf

Tender Documents • 0.03 MB

TENDERFORM.pdf

Tender Documents • 0.24 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1BUILDING MAINTENANCE
1.001	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.96	cum	335.74	₹322.31
1.002	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	1,464.16	kg	174.58	₹2,55,613.23
1.003	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	134.23	sqm	153.87	₹20,653.66
1.004	OD96356/2026-2027:Providing and fixing Alu-Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40mm (+0.05%) thickness. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm)with EPDM seal, complete up to any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins, rafter sand trusses and including cutting to size and shape wherever required. (MOD 12.50 of DSR ) (As per EE Circular No. D3 dtd 02/07/21)	79.56	sqm	538.49	₹42,842.26
1.005	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	10.05	metre	527.38	₹5,300.17
1.006	OD96493/2026-2027:Providing and fixing 150mm UPVC Square gutter pipe over GI clamp of same profile at 1m C/C	20.1	metre	327.02	₹6,573.1
1.007	50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall	20	metre	401.21	₹8,024.2
1.008	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	8.64	cum	8,620.24	₹74,487.49
1.009	5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	18.68	sqm	360.41	₹6,730.66

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1BUILDING MAINTENANCE

1.001

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

0.96

cum

335.74

₹322.31

1.002

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

1,464.16

174.58

₹2,55,613.23

1.003

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

134.23

sqm

153.87

₹20,653.66

1.004

OD96356/2026-2027:Providing and fixing Alu-Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40mm (+0.05%) thickness. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm)with EPDM seal, complete up to any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins, rafter sand trusses and including cutting to size and shape wherever required. (MOD 12.50 of DSR ) (As per EE Circular No. D3 dtd 02/07/21)

79.56

sqm

538.49

₹42,842.26

1.005

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

10.05

metre

527.38

₹5,300.17

1.006

OD96493/2026-2027:Providing and fixing 150mm UPVC Square gutter pipe over GI clamp of same profile at 1m C/C

20.1

metre

327.02

₹6,573.1

1.007

50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

metre

401.21

₹8,024.2

1.008

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

8.64

cum

8,620.24

₹74,487.49

1.009

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

18.68

sqm

360.41

₹6,730.66