SPECIAL REPAIRS TO WASHROOMS, STEEL RAILING, BENCHES, FOOTPATH AND ALLIED WORKS IN VIEW POINTS AT DOLPHIN HILL AND PROVISION OF PARTITION OF OFFICE SPACE AND NEW WASHROOM FOR OIC AND WOMAN AGNIVEER AT HYDROGRAPHIC SURVEY UNIT, VISAKHAPATNAM

Amount

Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to outside MD land complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:3:6 type C1(using 20 mm graded stone aggregate) in plinth protection, and finishing the concrete surface even and smooth without using extra cement including making joints filled with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

M & L for non skid ceramic colour tiles 7 to 8 mm thick area of each ile exc. 0.11 Sqm but n.exc. 0.18 Sqm in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish to outside MD land complete all as specified and directed.

M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm / 450mm x 300mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

Supply and fixing in repair vitreous china (White) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (White) and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

Taking up or down 15mm bore, Steel tubing and connections complete all as specified and directed.

Supply, laying, connection and testing, 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supply, laying, connection and testing, 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Taking up or down of 25 mm dia CPVC pipes and connection complete all as specified and directed

Supply, laying, connection and testing, 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F 15mm bore, bib taps, long body, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

All as per item no 14 but S&F in repair complete all as specified and directed.

S & F 15 mm bore, CP Health Faucet with 8mm Dia, 1.0 Meter Long Flexible Tube & Wall Hook with all accessories complete all as specified and directed.

All as per item no 16 but S&F in repair complete all as specified and directed.

S & F in repairs, Vitreous China bowl urinal flat back, of size 465x355x265mm, white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed.

S&F vitreous China wash basin, size 550 x 400mm, white, flat back, with 32 mm dia PVC waste pipe, CP waste coupling, & backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and directed.

All as per item no 19 but S&F in repair complete all as specified and directed.

S & F in repair 15 mm bore, angular stop valve, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F stops valves, cast copper alloy, chromium plated fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.

All as per item no 22 but S&F in repair complete all as specified and directed.

S&F in repairs 110 mm Stainless steel grating fixed with white cement complete all as specified and as directed.

S&F in repairs 75 mm Stainless steel grating fixed with white cement complete all as specified and as directed.

S&F in repairs 32 mm bore CP waste coupling full thread / Half thread sutable for steel sink or wash hand basin complete all as specified and as directed.

S & F in repair corner glass shelf assembly with chromium plated bracket guard and railing complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

All as per item no 28 but S&F in repair complete all as specified and directed.

S & F in repairs, Toilet Roll Holder with Stainless Steel Flap, fixed to wall with brass screw complete all as specified and directed

S&F15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

All as per item no 31 but S&F in repair complete all as specified and directed.

S & F in repairs, 15mm bore, two way bib cock with wall flange cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair PTMT towel ring fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm size plain with grating including jointing with solvent cement complete all as specified and directed

All as per item no 35 but S&F in repair complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

All as per item no 37 but S&F in repair complete all as specified and directed.

S&F in repair 75 mm dia PVC(SWR) Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) and jointing with solvent cement complete all as specified and directed

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters without taking off shutters from frame complete all as specified and directed.

S & F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of m.s tubes for top & bottom rails m.s frame shall be covered with heat moulded plain colour pvc 'c' channel having a pvc sheet strip of 20mm width struk inside with salvent cement for stiles and plain colour pvc sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour pvc sheet to be fitted in the m.s frame welded / sealed to the stiles & rails with suitable pvc sheet beading , and joined togeather with salvent cement , suppling & fixing in the frame at site as per soecification & drawing complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s square tube , suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 150 mm long medium weight ,stainless steel handles, complete all as specified and directed.

S&F 150 mm long medium weight ,stainless steel barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long medium weight,stainless steel butt hinges complete all as specified and directed.

S&F 300mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coats of white wash complete all as specified and directed..

M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, having dart pick up resistant, silicon enhanced, UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS

M&L for preparation of old surfaces (plastered or unplastered) of ceilings including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling, complete, all as specified & directed.

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. (Note: plastering work at any height necessary scfolding , safety belts to be required)

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:6 on fair face of brick work finish the surface fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L preparing newly plastered wall surfaces and applying three coat of white wash complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5sq.m. each with shutters (without taking off shutters from the frame) complete all as specified and directed.

M& L for powder coated aluminum section (Minimum 50 Micron thick) of approved colour for doors, window, ventilators , partitions with frame and shutter fully or partly glazed, sliding/openable including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodized aluminium snap beading,screws,anodized aluminium fittings such as handles,aluminium butt hinges,aluminium tower bolts,stainless steel friction hinges,locking arrangements etc., complete all as specified and as directed. Notes: [a] The size of aluminium sections shall be all as specified in relavant IS code and MES Schedule part -1 [b] Panel inserts such as glass/particle board/Gauze shall be measured and paid separately at supply only rates. [c] Weight of aluminium sections shall only be accounted for payment purpose. Weight of aluminium handles,butt Hinges & Tower Bolts shall not be accounted for payment purpose. [d] The unit rate quoted shall be deemed to include for cost of joining cleats ,glazing clips, rubber beading, neoprene packing, anodized aluminium fittings such as handles,aluminium butt hinges,aluminium tower bolts,stainless steel friction hinges,locking arrangements etc., and fixing only of panel inserts of glass/particle board/gauge etc

Supply only 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5sq.m. in each pane complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation, filling and mass concrete, sub base of concrete floor complete all as specified and as directed.

M & L for reinforced cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.

M & L for Machine pressed precast conctete coloured/multi coloured interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M & L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for Plain cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for Mild Steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer complete all as specified and directed.

M & L for brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and as directed

Material & labour for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm gaded stone aggregate laid on RCC roof slab to make surface levelled for proper slope finish the surface even and fair complete all as specified and as directed.

M & L for 10 mm thick, screed bed as in roof in cement mortar 1:3 finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately)

Material and labour for preparation of horizontal or vertical surfaces for water proofing treatment on existing cleaned non accessible RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:- (a) Preparing and cleaning of fully dry surfaces as per IS3067-1966 (b) Applying bitumen primer(85/25 grade)conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps shall be applied on the prepared surface. (c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.6Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application. The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (d) Applying one coat of aluminium paint @0.10 ltr per sqm over APP based polymeric membrane.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M & L for precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab (For manhole etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately)

S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick / stone masonry surfaces finishing even and smooth without using extra cement complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar and removing rubbish upto a distanceto a distance n.exe 100 m complete all as specified and directed.

M & L for 18 to 20mm thick Granite (of any type) work ,machine cut (table rubbed and polished) in floors, steps, jambs, pillars, window-cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortar 1:6 & cutting, polishing complete all as specified and directed.

M & L for 18 to 20mm thick Granite (of any type) work,machine cut(table rubbed and polished), in skirting/ dado laid over 10 mm thick bedding in cement mortor 1:4, set and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators, etc., with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

S & F Powder coated (minimum 50 micron) Anodised aluminium door shutters partly paneled and partly glazed,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, inges,anodised aluminum snap beading screws etc. complete all as specified and directed

S & F 6mm thick Aluminium composite panel sheet for doors complete all as specified and directed.

S & F 5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S & F 5mm thick Figured glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as speicified and directed.

M&L for Brick work with subclass ‘B’ old size fly ash bricks, straight or curved on plan exc 6m mean radius in half brick thick walls in, built in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge..

M & L for 40 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed.

S&F 125mm Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm, 2 lever, aluminium, Mortice Lock, vertical type complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.

S & F Vitreous China snow white EWC Wall Hung Extended of size 655 x 350 x 735 mm, two piece with seat cover, cistern with lid and P trap complete set and all fittings and fixtures including connection to outgoing drain including making good damaged/disturbed surfaces complete all as specified and directed.

S&F vitreous china snow white single piece WC of size 360x655x765 mm, P Trap- 180 mm with UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories complete all as specified and directed Make: Jaquar Cat No. LYS-WHT-38751P180UFSMZ or equivelant model of make as per list of manufacturer mentioned in PS.

S&F chromium plated toilet paper holder with flap recessed type complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed..

S F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed..

S&F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

M & L for filling polymer modified non shrinking slurry for sunken floors of toilets by drilling holes to a depth of 60mm by 20mm dia at 1 mtr interval and applying 2mm thick Acrylic polymer modified elastomeric waterproofing membrane coating over the concrete syrfaces by mixing Acrylic emulsion cement modifier and water based concrete bonding agent and water including testing the same for 48 hours as per the manufacturer's technical specification complete all as specified and as directed Make: (a) Polymer modified non shrinking slurry = CEBEX 100 of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (b) Acrylic polymer modified elastomeric waterproofing membrane = Brushbond of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (C) Acrylic emulsion cement modifier and water based concrete bonding agent = NITO BOND BB with Brush bond powder of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd.

M&L for treating the existing pipe penetrations of any dia using non-shrink, free flowing, cementitious grout having compressive strength not exceeding 50 N/mm2 at 7 days and 60 N/mm2 at 28 days, flexural strength not exceeding 9N/mm2 @ 28 days and fresh wet density of the mixed grout must not exceed 2150 kg/m3 of Max grout PF. Further flashing the area using solvent based UV resistant polyurethane based waterproofing material having minimum tensile strength on 4 N/mm2 and minimum elongation of 800%. Complete all as specified and directed by Engineer-in-charge. Make: Sika Grout 214IN or equivalent product of Fosroc,Dr Fixit ,Thermax Ltd, Tiki tar

M & L for conceled Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLSH (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type including metal GI boxes of suitable module including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLSH [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch. (Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)

S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.

S&F ceiling rose, 65 X 50mm two to three terminals, PVC / polycarbonate, insolated body complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible,copper conductor cable of suitable size from ceiling rose complete,including taking down existing tube light fitting of any type and making good to the disturbed surface to match with existing complete all as specified and as directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete,including taking down existing tube light fitting of any type and making good to the disturbed surface to match with existing complete all as specified and as directed

S&F Distribution Board, SPN 8 Way, 240V, Double door with IP 43 protection IK 09 complete all as specified and as directed.

Supply, fixing, commissioning and testing MCB SPN 6 to 32 Amps, 240 Volts, 10KA, C Curve, complete all as specified and as directed

Supply, fixing, commissioning and testing MCB SP 6 to 32 Amps, 240 Volts, 10KA, C Curve, complete all as specified and as directed

S&F metal body Exhaust fan,300 mm sweep, AC, single phase complete with all accessories and electric connection including making necessary holes in walls complete all as specified and directed

M/s Sudersana Traders (BID ID -3458948)

SRI THULASI TECH (BID ID -3459116)

M/S REAL POWER SYSTEMS (BID ID -3458942)

K & K CONSTRUCTIONS (BID ID -3459164)

V R K CONSTRUCTIONS (BID ID -3459278)

ANUJ INFRA (BID ID -3459293)

S A R CONSTRUCTIONS (BID ID -3459249)